Who might need an audio interface?

Intro editors who don’t record their own audio

You edit finished voice recordings in a limited space and want to check first whether your existing headphones work well enough with your current device.

Solo voice artists with an XLR microphone

You record your own intros and need a suitable microphone input, as well as a convenient way to monitor your voice while recording.

Two-person voice recordings

You want to record two voices separately at the same time. What matters is the number of microphone preamps, not simply the total number of connections.

What should you look for when choosing one?

Keep using your existing playback setup

A good fit if: You only edit finished intros and your headphones work well with your current device.

The trade-off: You save desk space, but won’t gain an extra microphone input or hardware control.

Interface with one microphone input

A good fit if: You record on your own using one microphone and want to control recording and headphone monitoring from the device.

The trade-off: One microphone input isn’t enough to record two separate microphone voices at the same time.

Interface with two microphone preamps

A good fit if: You want to record two voices at the same time through separate microphone inputs.

The trade-off: Extra connections may go unused for solo voice recordings; two microphone inputs don’t automatically mean two headphone outputs.

What you need What to check before buying Who will find this especially important?
Hardware for editing First check playback through your existing headphones and the device settings in your editing software. If I only edit existing intros, I want to avoid unnecessary equipment on my small desk. Around 39 % of consumers put this need first.
Recording your own voice Check the microphone connection and power requirements against your specific microphone; check the headphone connection and monitoring options. If I record an intro on my own, I need a suitable microphone input and want to monitor my voice while recording. Around 31 % of consumers prioritise recording solo.
Recording two separate voices Check for two microphone inputs that can be used at the same time, and a suitable monitoring setup for both people. If we record two voices at the same time, I want to be able to adjust each microphone level separately. Around 15 % of consumers prioritise this need.
Desk space and computer connection Check the unit’s dimensions, including room for cables, as well as the USB connection and the exact model’s system requirements. If desk space is limited or I switch between computers, I want to check the space required and compatibility in advance. Around 15 % of consumers put these requirements first.

Avoid common buying mistakes

  • Buying a recording device too soon for editing files alone

    Editing software can use an existing playback device, so a new interface isn’t automatically necessary.

    First, try editing and listening through your headphones with your current device.

    An extra device and its cables take up space, even if you don’t use the microphone inputs.

  • Confusing the total number of connections with the number of microphone inputs

    For the Scarlett Solo 4th Gen and AudioBox GO, the additional input isn’t specified as a second microphone preamp.

    Check the exact model and count the inputs specifically designated for microphones if you want to record two XLR voices separately.

    If you later want to record two separate microphone voices, you may need a different interface.

  • Monitoring through Direct Monitoring and software at the same time

    If you hear the same signal directly through the interface and again through the software, it can create a delayed echo.

    Check both monitoring paths while recording and turn off the one you don’t need.

  • Expecting a new interface to remove room echo

    A microphone can’t reliably separate room reflections that have already been recorded from the direct voice signal, so an interface won’t remove them on its own.

    Compare short test recordings with the microphone in different positions in the room where you actually record.

Key brands at a glance

Focusrite

The Scarlett range includes a variety of models and generations. The Scarlett Solo 4th Gen is designed for one XLR microphone input, while the Scarlett 2i2 3rd Gen is a separate model with two microphone inputs.

  • Focusrite user guides list separate controls for the main and headphone outputs on the Scarlett Solo 4th Gen, as well as a body footprint of 143 × 96 mm without cables.
  • The additional jack input on the Scarlett Solo 4th Gen isn’t a second microphone input. Features vary between Scarlett generations, so don’t assume they’re all the same.

Arturia

The MiniFuse 1 is designed for a single XLR or jack source and direct monitoring.

  • Arturia specifies a combo input, switchable 48 V phantom power, a Direct Monitor switch and a headphone control.
  • The MiniFuse 1 isn’t equipped to record two separate microphone voices at the same time. Monitoring the same signal through both the hardware and software can create an echo.

PreSonus

The AudioBox GO is described as suitable for one microphone voice, with the option of an instrument input; the Studio 24c has two microphone preamps.

  • PreSonus lists one microphone preamp and a separate instrument input for the AudioBox GO. The Studio 24c is listed with two microphone preamps and a monitor mix control.
  • PreSonus states that access to Fender Studio Pro with the Studio 24c is a six-month trial.

MOTU

The M2 has two separately usable combo inputs, plus additional meters and controls.

  • MOTU lists two XLR/TRS combo sockets, a monitor switch for each input and a level meter on the display. The unit measures 19,05 × 10,8 cm without cables.
  • Before buying, check the published system requirements for the M2 against your computer. Extra connections and controls are only useful if you need them.

Steinberg

The IXO12 combines a microphone preamp with Direct Monitoring and Loopback.

  • Steinberg lists a microphone preamp, Direct Monitoring and Loopback for the IXO12.
  • Loopback is designed for specific recording or streaming setups; it isn’t essential for editing an existing voice recording.

Joybuy product selection

The selection below features a podcast kit for voice recordings with two 3.5 mm condenser microphones. If you specifically want to connect an XLR microphone, check that the product’s inputs are suitable before buying.

Yinkaer G10-P17-P17 podcast kit with two microphones

Yinkaer G10-P17-P17 podcast kit with two microphones

Worth considering for voice recordings, with the two microphones named in the product title and the desktop stands. Check that the connections suit your setup before buying.

  • Listed in the product title: two 3.5 mm condenser microphones and desktop stands.
  • Described as an audio interface or sound card for a computer or phone.
  • Built-in effects are mentioned in the product title; check the exact features before buying.
View at Joybuy

Frequently asked questions

Do I need an audio interface to edit an intro I’ve already recorded?

Not just for editing. If you can listen to the file clearly through your current playback device, try that setup first; the Audacity manual explains how to select a playback device. A microphone input becomes relevant if you want to connect a suitable microphone yourself.

Why do I hear a delayed echo while recording?

Check whether you’re hearing the same microphone signal directly through the interface and again, with a delay, through the software. For the MiniFuse 1, Arturia recommends turning off software monitoring for the track in question while recording. Check the settings on your own device and software too.

When should I switch on 48 V phantom power?

Switch it on if the instructions for your specific microphone say it’s required. RØDE notes that many condenser microphones need phantom power, while dynamic microphones and instruments don’t need it simply because of their type.

What should I check about bundled software and faults?

Check how long you can use any bundled software: PreSonus describes access to Fender Studio Pro with the Studio 24c as a six-month trial. If a product is faulty, distinguish your statutory rights against the seller from any voluntary warranty.

Can I put a discarded audio interface in household rubbish in Germany?

No. The German Environment Agency states that old electrical equipment must be disposed of separately and must not go in household rubbish.