If your existing USB microphone is all you need for recording and listening back, you don’t necessarily need an additional audio interface for short voice intros. If you’re using an XLR microphone, first decide whether you want to record one or two voices at the same time. Then check the monitoring options, whether your microphone needs power, and whether you need loopback for computer audio. Manufacturers’ feature descriptions are no substitute for an independent sound comparison.
Who would benefit from an audio interface?
Recording solo with an XLR microphone
If you record voice intros on your own, look for a suitable microphone input and the ability to monitor your signal as you speak. Focusrite User Guides and RØDE document these features on their respective single-channel models.
Two voices in the same room
To record two voices at the same time, you’ll need two suitable microphone channels so you can connect both microphones. Focusrite, Audient and Behringer document models with two microphone channels.
Recording computer audio too
If you want to record audio from a computer application alongside your voice, check whether the interface offers loopback and how to select the signal source in your software. Focusrite and Audient document loopback features on certain models.
What should you look for when buying?
First, check whether your existing USB setup does the job. If you’re using an XLR microphone, the next thing to consider is how many microphone inputs you need to use at the same time. Monitoring and loopback are additional features to consider for your particular recording setup.
| What you need |
What to check when buying |
Who needs it? |
| Microphone input and level |
Count the XLR inputs explicitly listed as microphone inputs. Check for a level meter and 48 V phantom power only if your microphone needs them. |
If you record an intro on your own with an XLR microphone, you’ll need a suitable microphone input and may want to monitor the level. Around 36% of consumers prioritise this single-microphone setup. |
| Headphone monitoring |
Check for a headphone socket, volume control and a documented monitoring route; test your setup before recording. |
If you want to hear yourself as you speak and check the recording, headphone monitoring and a suitable control are important. Around 29% of consumers prioritise monitoring. |
| Two microphones |
Check that two microphone preamps and the appropriate connections can be used at the same time. Plan monitoring separately for each person. |
Two microphone channels are essential if you’re recording two voices at the same time using separate microphones. Around 21% of consumers prioritise this. |
| Recording computer audio |
Check the loopback documentation for the exact model and whether your recording app can select the intended virtual input. |
If you want to record audio from a computer application alongside your voice, check the signal routing in advance. Around 14% of consumers prioritise this kind of computer audio. |
Common misconceptions
-
“Two inputs” doesn’t necessarily mean two microphone inputs
On the Focusrite Scarlett Solo 4th Gen, one input is designed for something other than an XLR microphone. According to Focusrite User Guides, the Scarlett 2i2 4th Gen has two XLR microphone sockets.
For the model you’re considering, count only the connections explicitly listed as microphone inputs.
If you later want to use a second XLR microphone at the same time, you may need a different interface.
-
Phantom power or individual specifications don’t prove sound quality
48 V phantom power matters only if your microphone needs it. Individual technical specifications don’t prove better sound or guarantee recording quality.
Check your microphone’s requirements and do a level test before recording.
-
Loopback isn’t an extra microphone socket
Focusrite describes loopback as a virtual input for computer audio, not an additional physical microphone socket.
Plan your microphone connections and computer audio separately, and check which source is selected in your recording software.
Key brands at a glance
Focusrite
The Scarlett Solo 4th Gen is designed for one XLR microphone channel, while the Scarlett 2i2 4th Gen has two XLR microphone sockets. Focusrite documents loopback on both models.
- The Focusrite User Guides describe direct monitoring and a separate headphone control on the Solo; the 2i2 is documented as having two XLR sockets.
- The Solo’s instrument input isn’t a second microphone channel. The manufacturer’s specifications aren’t an independent sound test.
Audient
According to Audient, the EVO 4 has two microphone preamps and loopback for computer audio.
- Audient describes Smartgain for automatic level setting, as well as a loopback feature.
- Smartgain doesn’t replace checking your levels and recording setup.
RØDE
The AI-1 is a single-channel interface for one microphone, with headphone monitoring.
- RØDE documents a combo socket, switchable phantom power and direct monitoring.
- One microphone preamp isn’t enough to connect two XLR microphones at the same time.
Behringer
According to Behringer, the UMC202HD is designed for two microphones and direct headphone monitoring.
- Behringer documents two microphone preamps, a 48 V switch and direct monitoring.
- For Windows, the manufacturer specifies a driver that needs to be downloaded. This doesn’t constitute an independent comparison of recording quality.
Steinberg
The UR22C is an option with two preamps and loopback for computer audio.
- Steinberg describes loopback as combining incoming signals with computer playback.
- If you want to edit your voice and computer audio separately later, check the exact signal routing. The manufacturer’s description doesn’t prove independent superiority.
Related products from Joybuy
The following products are microphone sets with an audio mixer for voice recordings. They include 3.5 mm microphones, so check before buying that they’ll work with your planned connections and recording setup.
No image available
Yinkaer G10-P17-P17 podcast kit with two 3.5 mm condenser microphones
Could suit a voice recording setup if you’re looking for a kit with two microphones and an audio mixer; the microphones aren’t described as XLR models.
The product name lists two 3.5 mm condenser microphones, as well as a sound card and an audio mixer device.
View at Joybuy
No image available
Yinkaer G10-P17 podcast microphone kit with 3.5 mm condenser microphone
This is better suited to a setup where you’re looking for one microphone with an audio mixer and sound card; if you’re planning to use an XLR microphone, the supplied microphone isn’t listed as having a compatible XLR connection.
The product name lists a 3.5 mm condenser microphone and an audio mixer.
View at Joybuy
Frequently asked questions
Do I definitely need an audio interface for my existing USB microphone?
No, not if your existing USB microphone is all you need for recording and listening back. Podigee lists USB microphones as a solution that doesn’t require an additional interface.
When should I switch on 48 V phantom power?
Only switch it on if your specific microphone needs it. RØDE notes that most dynamic microphones don’t need 48 V; check your microphone’s requirements.
What should I check before recording my first intro?
Connect the microphone to the input designated for it, select it in your recording software and test the level with a sample recording. Focusrite notes that an input level that’s too high can cause audible distortion.
What accessories and setup details should I check before buying?
Check whether you have a suitable XLR cable and the right headphone plug or adapter. For the UMC202HD on Windows, Behringer specifies a driver that needs to be downloaded; check the specific product listing to see whether accessories are included.