Who needs an audio interface?

Vocal editors mixing on their own

If you mainly work on previously recorded tracks by yourself, first check whether your existing output is suitable for your headphones or speakers. The Audacity Manual explains both how to import multiple audio files into a project and how to select a playback device.

People monitoring together

If you’re reviewing a mix with someone else or need different monitoring signals, don’t just count the sockets: check the documented signal routing too. Audient describes a cue mix assignment on the iD14 MKII, while Solid State Logic specifies several independent headphone mixes for the SSL 12.

Mixers recording new vocal takes

If you’re also recording vocals, consider how many microphone inputs you need to use at the same time and whether the monitoring workflow suits you. Focusrite specifies two microphone inputs for the fourth-generation Scarlett 2i2. PreSonus describes the Studio 24c as having two inputs and a control for mixing the input signal with computer playback.

What should you look for when buying?

First check whether your existing computer output can power the monitoring setup you want. An interface becomes relevant when you need more connections, a specific signal path or inputs for new recordings.

What you need What to check before buying Who is this important for?
Suitable solo monitoring Are the headphone and line outputs compatible with your connectors? Check whether you can adjust their levels separately and whether both outputs carry the same signal. If I’m mixing existing tracks on my own, I want to connect my headphones and, if needed, studio monitors, and adjust the levels easily. Around 40% of consumers prioritise this kind of solo monitoring.
Separate monitoring paths Does the documentation show that independent mixes can be routed to the outputs you need? Audient warns that “DAW thru” bypasses the volume control for the relevant output on the iD14 MKII. If I’m working with someone else but need to hear a different mix from the person listening on the speakers, the right signal routing matters. Around 20% of consumers prioritise separate monitoring paths.
New vocal takes Count the microphones you want to record at the same time and check their connections, as well as whether you need phantom power. Also compare how you can monitor the input signal alongside computer playback. If I’m recording new backing vocals as well as mixing, I need suitable inputs and a monitoring workflow for recording. Around 30% of consumers prioritise recording additional vocals.
Computer connection and space Check operating system support, the USB port available and the power requirements of the specific model. Audient specifies that the iD14 MKII requires at least USB 3.0 with 0.9 A at 5 V. If my computer’s ports or desk space limit my choice, I want to check these requirements before buying. Around 10% of consumers prioritise computer connectivity and their workspace setup.

Common buying mistakes

  • Paying for recording inputs when you only mix existing tracks

    You can import saved tracks into audio software and listen to them through a selected playback device. So extra microphone inputs won’t automatically solve a monitoring problem.

    First check your existing output and your headphones or speakers. Look for microphone inputs if recording new vocals is part of your workflow.

  • Assuming separate level controls mean separate mixes

    According to Focusrite, the headphone and line outputs on the fourth-generation Scarlett 2i2 carry the same signal. So separate volume controls don’t mean that the outputs receive different mixes.

    If you need different monitoring signals, check the routing information for the exact model.

  • Enabling “DAW thru” without checking the headphone level

    Audient warns that “DAW thru” bypasses the volume control for the relevant output on the iD14 MKII, which can result in a very high level.

    If you’re setting up a separate mix, start with the documented cue path and keep the level low.

Key brands to consider

Focusrite

The fourth-generation Scarlett 2i2 is a useful reference point for a stereo monitoring setup and occasional vocal recordings.

  • Focusrite specifies two microphone inputs, as well as headphone and line outputs.
  • The headphone and line outputs carry the same signal, so you can’t assume they provide an independent cue mix.

Audient

The iD14 MKII is worth considering if you want to assign a cue mix to the headphone output.

  • Audient documents how to assign cue mixes to the headphone output.
  • Audient warns that “DAW thru” bypasses the volume control for the relevant output. Also check the model’s USB power requirements.

Solid State Logic

The SSL 12 is a useful reference point for setups that need several headphone mixes or additional recording inputs.

  • Solid State Logic specifies several independent headphone mixes via SSL 360° and four analogue preamps.
  • These features are documented for the SSL 12; they don’t mean that a solo mixing setup needs several independent mixes.

MOTU

The M2 is a useful reference point for monitoring on headphones and speakers at a compact workstation.

  • MOTU lists balanced TRS line outputs, a headphone output and separate controls for monitor and headphone levels.
  • Separate level controls alone don’t prove that there are two independent headphone mixes.

PreSonus

The Studio 24c is an option if you occasionally record new vocals as well as mixing.

  • PreSonus specifies two inputs, balanced monitor outputs and a mix control for the input signal and computer playback.
  • These specifications don’t confirm separate routing for several headphone mixes.

Recommended products on Joybuy

Related products will be available soon.

Frequently asked questions

Can I mix existing backing vocal tracks without buying a new interface?

Yes, if your existing playback device can power your headphones or speakers for the setup you have in mind. The Audacity Manual explains how to import several existing files into a project and select a playback device; this doesn’t mean you always need an external interface.

How do I set up monitoring for an initial check?

Connect your headphones or speakers to your chosen playback device, select it as the output device in your audio software and start at a low level. If you need different cue mixes, also check the routing instructions for the exact model. Audient specifically warns that “DAW thru” can result in a high level on the iD14 MKII.

Do I need two headphone sockets so two people can hear different mixes?

No. To hear different mixes, you need signal paths that can be assigned separately. Solid State Logic describes several independent headphone mixes on the SSL 12, while Audient describes a cue assignment for the iD14 MKII’s headphone output. Also check how many sockets you need to use at the same time.

Who should I contact if I find a fault after buying in Germany?

If you bought from a retailer, your statutory rights against the seller are separate from any voluntary manufacturer’s or retailer’s guarantee. The Verbraucherzentrale explains that, where you’re entitled to a repair or replacement, the seller covers the costs of transport, labour and materials. Check the requirements for your specific purchase.

How should I dispose of an old audio interface in Germany?

End-of-life electrical equipment should be collected separately, not put in your general household waste. The German Environment Agency lists local collection points, which generally accept old electrical equipment free of charge; additional conditions apply to take-back schemes run by retailers.