If you’re mixing pre-recorded dance tracks in your home studio through a pair of monitors or headphones, an interface with the right connections for stereo monitoring is a good starting point. Extra inputs aren’t an end in themselves. If you’re recording synths or drum machines, or need a second signal path that can be routed separately, plan for the physical line inputs and outputs you’ll need to use at the same time. Latency, drivers and buffer settings become especially important when you’re recording new signals and monitoring them as you play.
Which setup is right for you?
Dance producers using stereo monitoring
If you mainly mix existing DAW tracks at your desk, you’ll need to connect your monitors or headphones properly and be able to adjust their levels easily. Bonedo describes audio interfaces as the link between your computer, speakers, headphones and external equipment.
Producers with hardware synths
If you also want to record synths or drum machines, consider how many line channels you’ll need at the same time and whether you need MIDI connections. The connection examples from Focusrite and MOTU show that a stereo source uses two audio inputs.
Producers who need a second signal path
If you want to use another monitoring or hardware path alongside your main monitors, check how many physical outputs there are and how they can be routed. Focusrite and MOTU document different line-output configurations on certain models.
What should you look for when buying?
First, decide which monitors, headphones and hardware you want to connect at the same time. Then check that the drivers and monitoring options suit the way you record.
| What to consider |
What to check before buying |
Who needs to consider this? |
| Suitable monitoring connections |
Check that your monitors and headphones can connect to the outputs on the specific model. Don’t confuse separate volume controls with independently routable signals. |
If I’m mixing existing dance tracks at my desk through my monitors or headphones, I want to connect them properly and adjust the monitoring level easily. Around 33% of consumers put stereo monitoring first. |
| Second signal path |
Check whether there are additional physical line outputs and whether you can route signals to them from your DAW. Don’t count mirrored sockets as independent outputs. |
If I need a separate monitor or hardware path alongside my main monitors, I check whether there’s a dedicated, routable pair of outputs. Around 27% of consumers prioritise having a second signal path they can use independently. |
| Inputs for hardware |
Allow for all the mono and stereo sources you want to record at the same time. Check the line and MIDI connections, and distinguish between shared combo sockets. |
If I want to record a stereo drum machine or several synths, I need enough suitable inputs available at the same time. Around 20% of consumers prioritise recording hardware. |
| Drivers and monitoring while recording |
Check that the interface supports your operating system and DAW. Consider whether you’re just mixing or want to monitor through DAW effects while recording. |
If I’m recording new signals and want to monitor them as I record, I look for a compatible driver and a workflow that suits my DAW. Around 20% of consumers prioritise this recording workflow. |
Common selection mistakes
-
Counting a headphone socket as a second independent stereo output
A separate headphone volume control doesn’t, by itself, provide an independently routable signal path. For a separate path, check the physical line outputs on the specific model and how they can be routed.
If you later need an additional routable output, you may have to replace your interface.
-
Counting a channel’s XLR and jack sockets as two inputs
On the 4th Generation Scarlett 2i2, plugging into the front jack socket disables the corresponding XLR microphone input, as Focusrite explains in the model information. Count the channels you can use at the same time, not the number of visible sockets.
If you need a different channel configuration, you may need to change your recording setup or add another interface.
-
Assuming USB version or maximum sample rate means low latency
Drivers, buffer size, CPU load and plug-ins all affect latency. Ableton notes that smaller buffers can increase the load on your computer, which may lead to drop-outs.
Check that the driver suits your setup and consider your recording workflow, rather than choosing on the basis of a high spec alone.
Key brands to consider
Focusrite
The 4th Generation Scarlett 2i2 and 4i4 illustrate the difference between a compact stereo monitoring setup and four physical line outputs.
- Focusrite lists two balanced line outputs and a separately adjustable headphone volume for the 2i2, while the 4i4 has four balanced line outputs.
- The extra outputs on the 4i4 are only useful if you actually route signals to them and use them. These are manufacturer specifications, not an independent sound comparison.
MOTU
The M2 is designed for two analogue inputs and outputs, while the M4 adds more analogue line connections and MIDI.
- MOTU lists four balanced TRS line outputs, two additional line inputs and level meters for the M4. The M2 has two balanced TRS line outputs.
- The M4’s four RCA outputs mirror other outputs; they aren’t four additional independent channels. These specifications are from the manufacturer.
Arturia
The MiniFuse 4 is designed for setups that can make use of multiple inputs and outputs, MIDI and two headphone connections.
- Arturia lists four inputs and outputs, two headphone connections, MIDI I/O and a built-in USB hub.
- Two headphone sockets alone don’t tell you whether each can receive a different mix. Check the routing on the specific model to make sure it suits your workflow.
Steinberg
The UR22C combines a two-channel setup with MIDI In/Out, Monitor Mix and a documented loopback function.
- Steinberg describes loopback as a way to combine live inputs and computer playback when streaming.
- Loopback doesn’t provide an extra physical stereo output. Manufacturer claims about sound quality aren’t an independent comparison.
Related products at Joybuy
Related products will be available soon.
Frequently asked questions
Do I need particularly low latency when mixing pre-recorded dance tracks?
Low recording latency isn’t a priority when you’re simply playing back existing tracks. If you’re recording new instruments and monitoring through your DAW, buffer size, drivers and plug-in latency become important. Ableton notes that a smaller buffer can increase the load on your computer.
How do I connect a stereo drum machine?
If your drum machine has two analogue line outputs, allow for two suitable input channels. Focusrite shows how to connect a stereo line source to inputs 1 and 2 on the 4th Generation Scarlett 2i2. Also check your drum machine’s connections and signal levels.
How can I avoid latency when monitoring a recording?
If your interface supports direct monitoring, you can listen to the input signal without routing it through your DAW. In this case, Ableton recommends switching off monitoring for the relevant recording track in Live so you don’t hear the signal twice.
Who should I contact if there’s a fault?
For consumer purchases in Germany, statutory warranty claims are made against the seller. The Verbraucherzentrale distinguishes this statutory warranty from a voluntary guarantee offered by a manufacturer or retailer.
What should I look for on the product label, and where should I take an old interface?
The German Federal Network Agency lists CE marking, product traceability and accurate manufacturer details among the things checked during market surveillance. According to the German Environment Agency, old electrical equipment shouldn’t go in household rubbish; it should be taken to a suitable separate collection point.