Who is this approach for?

Dialogue editors short on power sockets

If you check voice recordings and would rather not use another power socket for your interface, the key question is whether your computer port can adequately power the model in question. Focusrite, Audient and PreSonus provide information about USB power for their respective models.

Those switching between headphones and speakers

If you mainly check dialogue details on headphones and occasionally switch to speakers, look for compatible connections and easy-to-reach level controls. Focusrite, MOTU and PreSonus document relevant connections and controls on certain models. Active speakers need their own power supply.

Editors who occasionally make new recordings

If you also want to record dialogue, the type and number of microphone inputs you need—and phantom power, if required—will help you choose. Information from Focusrite, MOTU, Audient and PreSonus applies to specific models.

What should you look for when buying?

First, check whether your computer can power the interface and whether your headphones are compatible. Then decide whether separate controls, software features or extra recording inputs matter for your workflow.

Consideration What to check when buying Who is it most relevant to?
Power supply The model’s power requirements and your computer port’s power output; alternative power options. If I don’t want to use an extra power socket for the interface, I’ll first check whether my computer can power it. Around 36% of consumers have this as their main concern.
Headphones and level control Plug size and socket position; don’t assume separate level controls mean independent routing. If I want to adjust the volume directly on the device while repeatedly listening back, I’ll look for compatible connections and easy-to-reach controls. Around 29% of consumers prioritise these monitoring controls.
Comparing edited files Check whether your editing software supports the loudness comparisons you need and, if required, LUFS normalisation. If I want to compare a cleaned-up dialogue edit with the original, the software matters just as much as the monitoring setup. Around 21% of consumers have file comparison as their main concern.
Occasional new recordings The type and number of microphone inputs you need; check whether your microphone requires phantom power. If I occasionally want to record dialogue as well as check finished files, I’ll choose inputs that suit my microphone. Around 14% of consumers put new recordings first.

Common misconceptions

  • A USB-C socket doesn’t automatically mean there’s enough power

    The connection alone doesn’t tell you how much power the computer port can provide. Focusrite points out that some computer ports may not supply enough power to the 4th-generation Scarlett 2i2.

    Compare the power requirements of the specific interface with what your computer port can provide. Also consider whether an alternative power supply would mean you need another free socket after all.

    If USB power is insufficient, you may need a suitable additional power source.

  • A bus-powered interface doesn’t mean your speakers can run without a socket

    USB power for the interface won’t automatically power connected speakers. You’ll need to factor in a separate power supply for active speakers.

    Plan for your computer, interface and speakers, or check whether headphones are enough for your workflow.

    Active speakers may need their own power socket where they’re set up.

  • More sockets don’t automatically mean independently mixable outputs

    According to MOTU, the RCA outputs on the MOTU M2 mirror the main outputs. Focusrite says the headphone and line outputs on the 4th-generation Scarlett 2i2 receive the same signal feed.

    If you want to send different signals to different monitoring setups at the same time, check the routing specifically rather than just counting the sockets.

  • More recording inputs won’t automatically improve comparisons of finished dialogue

    Microphone inputs matter for recording. The Audacity manual describes loudness normalisation as a feature of editing software, not of an audio interface.

    Choose the number of inputs to suit the recordings you actually plan to make, and check finished files in your software.

Key brands at a glance

Focusrite

The 4th-generation Scarlett 2i2 is a bus-powered option with separate level controls for headphones and the main outputs.

  • Focusrite lists two balanced line outputs and a 6.35 mm headphone output for this model.
  • The headphone and line outputs receive the same signal feed. Focusrite says an additional 5 V connection may be needed if your computer port doesn’t supply enough power.

MOTU

The MOTU M2 combines USB bus power with separate controls for monitor and headphone volume.

  • MOTU lists balanced TRS outputs, a headphone output and a display showing input and output levels.
  • According to MOTU, the RCA outputs mirror the main outputs; they are not an additional independently routed stereo output.

Audient

The iD4 MKII is a bus-powered option with two headphone sockets, and could suit you if you occasionally record with a single microphone too.

  • Audient lists a microphone preamp and two headphone sockets.
  • Audient specifies a minimum requirement of 0.9 A at 5 V from a USB 3.0 port, with a maximum requirement of 1.5 A at 5 V. Two sockets don’t guarantee that two independent mixes are possible.

PreSonus

The AudioBox GO is a compact, USB-powered option for one pair of headphones and, if needed, a pair of speakers.

  • PreSonus lists a 6.35 mm headphone output, two balanced main outputs and a microphone/line combo input.
  • The Mix control described by PreSonus blends input and software playback when recording; it doesn’t replace loudness analysis of edited files.

Audio interfaces at Joybuy

Recommended products coming soon.

Frequently asked questions

Does a USB-powered interface always save you a power socket?

Only if your computer port can adequately power the specific model. Focusrite lists an additional 5 V connection as a possible power source for the 4th-generation Scarlett 2i2 if your computer can’t supply enough power; Audient specifies a minimum requirement for the iD4 MKII from a USB 3.0 port. Remember to plan separately for active speakers.

What should I check when connecting my headphones?

Check that your headphone plug matches the socket on the specific interface. MOTU M2, the 4th-generation Scarlett 2i2 and AudioBox GO each have a documented 6.35 mm headphone connection.

Does the audio interface check the LUFS level of my dialogue edit?

No. LUFS normalisation is handled in editing software. The Audacity manual describes this feature in Audacity; the loudness target depends on where the audio will be played or the requirements of your brief.