For already-restored files, a simple headphone and monitor output is often enough, unless you need a second, independently assignable listening mix. Having two computer screens does not in itself require extra audio outputs. Additional line inputs are mainly relevant if you also want to capture an analogue stereo source.
Which setup is right for you?
Checking existing archive files
If you’re assessing restored files across two computer screens, you’ll need a suitable headphone or speaker output. The IASA explains the work involved in quality control for audiovisual collections, while Focusrite outlines the signal routing on its fourth-generation Scarlett 2i2.
Separate listening paths
If you want to send different signals to your headphones and speakers, or set up additional listening scenarios, check that the outputs can be assigned as needed and that their levels can be controlled. Audient and MOTU document the relevant connections and routing features on their models.
Capturing analogue source material as well
If you’re checking restored files and also want to digitise an analogue stereo source, look for two line inputs that can be used at the same time and are suitable for your source. Focusrite distinguishes between physical sockets and DAW inputs that can be used simultaneously on the fourth-generation Scarlett 2i2.
What matters when buying?
Start by identifying the main priority for your checking setup. Each percentage refers to consumers whose primary purchase concern is the point listed.
| Purchase priority |
What to check |
Who is this important to? |
| Controlled listening |
Check the headphone socket and level, as well as the connections for your existing pair of speakers and the signal routing. |
If I want to check existing files through headphones or a pair of speakers, a straightforward playback path matters. Around 36 % of consumers put this first. |
| Computer integration |
Check the USB connection, power requirements, supported operating system and audio device selection. |
If I’m checking files at a workstation with two screens, I want to make sure the computer and software use the interface I want as the audio output. Around 29 % of consumers prioritise computer integration. |
| Separate listening signals |
Check the manual to see whether the outputs you need can be assigned separately; test cue mix settings at a low level first. |
If I want to use headphones and another listening setup with different signals, I need routing that can actually be assigned independently. Around 21 % of consumers put separate listening signals first. |
| Capturing an analogue stereo source |
Check for two line inputs that can be used at the same time, suitable connections and the source level. |
If I want to capture an analogue stereo source as well as checking files, I need to be able to connect both channels. Around 14 % of consumers prioritise this additional recording. |
Common selection mistakes
-
Assuming two screens mean two audio listening paths
Computer screens and audio output are configured separately. Having two screens does not automatically mean you need additional audio outputs.
First, consider how many different audio signals you want to hear at the same time. Then choose the connections and routing to suit.
-
Confusing separate level controls with separate mixes
On the fourth-generation Scarlett 2i2, the headphone and line outputs have separate level controls, according to Focusrite, but both receive the same signal feed.
Before buying, check whether you only need separate volume controls or genuinely independent signal routing.
-
Using “DAW thru” without checking the level
Audient warns that “DAW thru” on the iD14 MKII bypasses the volume control for the relevant output and can be very loud.
Check the documented cue mix setup, and start at a low level whenever you change the routing.
-
Counting physical sockets as inputs you can use simultaneously
According to Focusrite, although the fourth-generation Scarlett 2i2 has four physical input sockets, only two inputs can be used in the DAW at the same time.
If you want to transfer analogue recordings, count the line channels you can use simultaneously, not just the sockets on the device.
Key brands to consider
Focusrite
The fourth-generation Scarlett 2i2 is a useful point of comparison if you need headphones, a pair of speakers and potentially two line input channels.
- Focusrite says the model has separate level controls for the headphones and main output.
- Both outputs receive the same signal feed. Four physical input sockets do not mean four DAW inputs can be used simultaneously.
Audient
The iD14 MKII is worth considering for workflows that need an assignable headphone cue mix and multiple line outputs.
- Audient lists four line outputs and two headphone sockets; one headphone output can be assigned to a cue mix.
- Audient warns that “DAW thru” bypasses the volume control for the relevant output. For USB power, Audient specifies at least 0.9 A at 5 V from a USB 3.0 port.
MOTU
The M4 is worth comparing if you need additional line outputs for listening.
- MOTU documents four balanced 6.35-mm line outputs and two additional line inputs.
- The number of connections alone does not confirm a particular headphone cue mix or an audible benefit when playing archive files. Check the operating system requirements for your computer.
Arturia
The MiniFuse 2 is an option for a straightforward headphone and stereo output path.
- Arturia lists two outputs, a headphone socket, and separate monitor and headphone level controls.
- The brand’s claims about sound quality are not independent measurements.
RME
The Babyface Pro FS is relevant if you need documented routing and the ability to adjust the line output level.
- RME describes TotalMix and a switch for setting the line output level between +19 and +4 dBu.
- RME describes the two headphone sockets as operating in parallel. They are therefore not necessarily two independently mixable headphone paths.
Joybuy product selection
This selection covers a straightforward USB playback path from a PC, with headphone or RCA output.
No image available
Nobsound Q4 USB Audio Gaming DAC
Described for PC playback through headphones or RCA outputs.
The headphone amplifier is specified for headphones with an impedance of 16–300 Ω.
View at Joybuy
Frequently asked questions
Do I need two audio interface outputs because I have two computer screens?
No. The number of computer screens does not determine how many audio listening paths you need. Set up the screens as displays and select the audio device you want to use for playback; Windows and macOS document these settings separately.
What should I check when setting up for an archive listening comparison?
Select your preferred output device in your computer and checking software, and start with the volume turned down. If Windows unexpectedly produces no sound, Microsoft lists an incorrectly selected output device and audio enhancements among the possible causes.
Are two headphone sockets enough for two different listening mixes?
Not necessarily. What matters is whether the specific device can route different signals. For the iD14 MKII, Audient describes assigning the headphone output to cue mixes and also warns that “DAW thru” bypasses the volume control for the relevant output.
Does buying an interface automatically give me the right to reproduce or publish restored archive recordings?
No. Buying the equipment does not grant you rights to use recordings. Section 60f of the UrhG sets out archive provisions tied to specific institutions and purposes, and refers to Section 60e; this does not amount to general permission for every purchaser to publish every collection. Before sharing material, clarify who owns it, the purpose of the use and the rights attached to the specific material.