Which setup suits you?

Percussion editors

If you mainly edit existing tracks, suitable headphone or monitor monitoring and easy-to-reach level controls matter more than having as many recording inputs as possible. Focusrite User Guides and MOTU document the relevant connections for the models they cover.

Musicians who occasionally record extra parts

If you sometimes add new microphone or line-level signals to your edits, check which types of input you need at the same time and how you’ll monitor the signal while recording. Model specifications from Focusrite User Guides, PreSonus and Steinberg show why inputs and monitoring should be considered separately.

Recording with multiple microphones

If you want to record several percussion signals simultaneously on separate tracks, you’ll need enough suitable built-in microphone preamps or a specific expansion plan. Focusrite User Guides, Audient and Steinberg document different connection configurations for their respective models.

What to look for when buying

Compact interface for editing and occasional recording

Best if: You mainly work with existing tracks and record no more than two microphone signals at once.

Trade-off: Two microphone inputs limit your options for recording with multiple microphones later on.

Desktop interface with extra line inputs or ADAT

Best if: You want to record a stereo analogue signal or prepare for a future expansion. The MOTU M4 has two microphone combo inputs and two additional line inputs; the Audient iD14 MKII has two built-in microphone preamps and an ADAT input.

Trade-off: The M4’s additional line inputs aren’t extra microphone preamps. To connect additional microphones to the iD14 MKII’s ADAT input, you’ll need suitable external hardware.

Interface with multiple microphone preamps

Best if: You want to record percussion with several microphones at once, on separate tracks. The Steinberg UR44C has four built-in microphone preamps, while the fourth-generation Focusrite Scarlett 18i20 has eight.

Trade-off: Extra recording inputs may go unused in a setup dedicated to editing. Count the microphones you need rather than just the total number of channels.

Connect an electronic drum module directly via USB

Best if: Your specific module can send the audio or MIDI data you need to your recording software via USB. Roland documents these options for the TD-17.

Trade-off: The TD-17’s features don’t necessarily apply to other modules. Also check separately how to connect your headphones and monitors.

What you need What to check before buying Who is this most important to?
Listen to and edit existing tracks Headphone connection and level, suitable monitor outputs and the signal routing you need. For the fourth-generation Scarlett 2i2, Focusrite User Guides document separate level controls for the headphones and main outputs. If I mainly edit existing takes, I want to connect my headphones and, where needed, monitors appropriately, and adjust their levels easily. Around 40% of consumers put monitoring and editing first.
Occasional percussion overdubs Count the microphone and line inputs you need separately; check that the drivers, buffer settings and direct monitoring work with your computer and software. Steinberg explains that smaller buffers increase the load on your computer and can cause dropouts; PreSonus documents a mix control on the Studio 24c for balancing input signals with computer playback. If I’m recording new percussion signals, the inputs and monitoring route need to work for the takes. Around 30% of consumers prioritise occasional overdubs.
Record with several microphones at once Count the built-in microphone preamps and plan for ADAT expansion separately: Steinberg lists four for the UR44C, while Focusrite User Guides list eight for the fourth-generation Scarlett 18i20. To connect extra microphones to the Audient iD14 MKII’s ADAT input, you’ll need suitable external hardware. If I want to record several percussion microphones simultaneously on separate tracks, I need enough suitable inputs. Around 20% of consumers put recording with multiple microphones first.
Connect your computer, software and power supply Check the operating system and driver specifications for the specific model, available USB connection and power requirements. MOTU publishes system requirements for the M4; Focusrite User Guides specify USB-C for data and power on the fourth-generation Scarlett 2i2, as well as a separate 5 V power connection. If my first priority is making sure the interface and software work with my computer, I’ll check the connections, drivers and power supply. Around 10% of consumers put computer connectivity first.

Common buying mistakes

  • Assuming the total number of inputs is the number of microphone inputs

    The total number of analogue inputs doesn’t tell you on its own how many microphones you can connect directly. On the MOTU M4, two of the four analogue inputs are microphone combo inputs; the Audient iD14 MKII’s ADAT input isn’t a built-in microphone input.

    First decide how many microphones you want to record at once. Then check built-in preamps, line inputs and digital expansion options separately.

    If you later want to record additional microphones via ADAT, you’ll need suitable external hardware.

  • Assuming you need the smallest possible buffer for every task

    Steinberg notes that smaller buffers increase the load on your computer and can cause dropouts. Keeping latency as low as possible matters most when recording overdubs in real time; it isn’t necessarily important when simply editing existing tracks.

    Test the buffer settings and drivers with your software for both overdubbing and editing and playback, rather than choosing an interface based only on a latency figure in its marketing.

  • Assuming USB-C guarantees a suitable power supply

    A USB-C connector alone doesn’t tell you whether the connection and power supply will work with your computer. Focusrite User Guides specify USB-C for data and power on the fourth-generation Scarlett 2i2, as well as a separate 5 V power connection.

    Compare the connection and power requirements of the exact model with the ports available on your computer.

Key brands at a glance

Focusrite

The Scarlett models covered in the documentation range from the compact fourth-generation 2i2 to the fourth-generation 18i20, which has more built-in microphone preamps.

  • Focusrite User Guides list two microphone inputs for the 2i2 and eight built-in microphone preamps for the 18i20.
  • The 2i2 isn’t designed for recording with multiple microphones; these specifications apply to the models and generations mentioned.

MOTU

The M4 is a desktop option if you want two additional analogue line inputs alongside two microphone combo inputs.

  • MOTU documents four analogue inputs, four line outputs and specific Mac and Windows requirements.
  • Only two of the four analogue inputs are microphone combo inputs; the manufacturer’s sound-quality claims aren’t an independent comparison.

Audient

The iD14 MKII combines two built-in microphone preamps with an ADAT input for possible future expansion.

  • Audient also lists two headphone connections and four line outputs.
  • You’ll need suitable external hardware to connect additional microphones to the ADAT input; these specifications apply to the iD14 MKII.

Steinberg

The UR44C is an option if you need four microphone preamps rather than two.

  • The Steinberg manual lists six inputs, four outputs and four D-PRE microphone preamps.
  • Six inputs don’t mean six microphone preamps; DSP monitoring specifications aren’t an independent latency measurement.

PreSonus

The Studio 24c is a compact point of comparison with two microphone/instrument/line inputs; the Studio 1824c offers a multi-channel alternative.

  • PreSonus documents a mix control on the Studio 24c for balancing input signals with computer playback, as well as eight built-in microphone preamps on the Studio 1824c.
  • The Studio 1824c needs external hardware for additional ADAT channels; sound and quality claims on product pages come from the manufacturer.

Audio interfaces at Joybuy

Similar products will be available soon.

Frequently asked questions

Do I need eight microphone inputs for percussion tracks that have already been recorded?

Not just for editing. Choose the number of recording inputs based on how many new signals you want to record separately at the same time; Focusrite User Guides list eight built-in microphone preamps on the fourth-generation Scarlett 18i20 for this kind of multi-microphone setup.

What should I check if there’s latency or audio dropouts?

Check that you have the right interface driver and test the buffer size with your audio software. Steinberg explains that smaller buffers reduce latency but also increase the load on your computer and can cause dropouts. For new takes, you should also check whether your interface offers direct monitoring.

Does the USB cable for an electronic drum module replace an audio interface?

That depends on the specific module and how you monitor your sound. Roland documents audio and MIDI recording to a DAW via USB for the TD-17; don’t assume this applies to other modules, and check separately how you want to connect your headphones and monitors.

What consumer rights apply when buying online?

For consumer purchases in the EU, faulty goods are generally covered by a legal guarantee of at least two years from receipt, as explained by the European Union’s Your Europe service. Online orders in Germany usually come with a 14-day right to cancel; the Verbraucherzentrale explains how the start of this period depends on whether you’re dealing with a contract or ordered goods. The right to cancel because you’ve changed your mind is separate from your legal rights if goods are faulty.

What are the rules on labelling and disposal in Germany?

According to the German Federal Network Agency, products covered by the relevant EU harmonisation legislation must carry a CE mark; this isn’t an independent quality mark. The European Union’s information on WEEE marking states that electrical and electronic waste must be collected separately rather than put in general waste. The requirements for a particular device depend on the product rules that apply to it.