Listeners in a Wi-Fi dead zone
You want to download audiobooks in a room behind solid internal walls, and you can place a mesh node somewhere that still gets a decent signal.
First, check whether you can download the audiobook near the router but not in the room where you want to listen. A mesh system won’t fix a problem with your internet connection or every app issue. A wireless node may help if it still has a good enough connection to the main router where you place it. If you have a usable LAN connection, Ethernet backhaul can avoid sending the signal through the wall. If there’s no suitable spot for a wireless node and no LAN connection, you could try powerline with Wi-Fi, although results depend on your sockets and electrical wiring.
You want to download audiobooks in a room behind solid internal walls, and you can place a mesh node somewhere that still gets a decent signal.
You have an Ethernet cable or a usable LAN socket near where you listen, and would rather connect your mesh units without sending the signal through the wall.
You want to keep using your internet router and find out how to connect and manage an additional mesh system before you buy.
A good fit if: you can find a spot between the router and listening room where an additional node gets a decent signal.
Consider: The node needs a good connection to the main router itself; placing it directly in the dead zone won’t be enough.
A good fit if: you have, or can run, a usable LAN connection close to where you listen.
Consider: Your devices, ports and cabling must be compatible with the system’s router or access point mode.
A good fit if: there’s no LAN connection or suitable spot for a wireless node, and you can test the sockets near where you listen.
Consider: The connection depends on your electrical wiring and any sources of interference.
| What you need | What to check before buying | Who is this important to? |
|---|---|---|
| Wireless backhaul | Check that the planned node location still has a decent connection to the main router. | If I need to place a node without a cable, it must still get a signal from the main router; around 36% of consumers prioritise a suitable wireless backhaul. |
| Wired connection to the listening area | Check your existing cabling and ports, along with Ethernet backhaul support and the system’s wiring requirements. | If I have a usable LAN cable close to where I listen, I want to use it to connect the units; around 29% of consumers prefer a wired backhaul. |
| Connecting your router | Check your router model, the supported mesh or access point mode, and the cables needed to connect the main node. | If I want to keep my router, I want to know in advance how to connect and manage the new system; around 21% of consumers prioritise router compatibility. |
| Cause of the problem and effort involved | Compare downloads near the router and in the room where you want to listen. Check the app and internet connection separately before choosing the set size and features. | If I want to avoid setting up lots of new hardware, I want to identify the real cause of the download problem first; around 14% of consumers prioritise the overall effort and troubleshooting. |
A mesh node will only help the target room if it can receive data from the main unit. So the best spot for the backhaul connection may not be right where you want to listen.
Check the signal at the planned node location separately from the signal in the target room. If there’s no decent connection there, consider a different way to connect.
A poorly chosen location may mean you need another node or a different connection method.
Manufacturers’ figures describe performance under specific product conditions, not the signal in a particular building. A high advertised Wi-Fi data rate doesn’t prove that you’ll be able to download an audiobook where you want to listen.
Check the connection between the nodes and the signal at your intended listening spot, rather than basing your choice on a single headline figure.
devolo warns that transfer speeds may be low at some sockets and that certain VDSL profiles may be affected by interference. This applies to the powerline connection; it isn’t a general feature of wireless mesh systems.
Try the intended sockets with your existing connection before committing to this way of connecting.
If the connection is weak, you may need to try different sockets or investigate the cause of the interference.
A failed audiobook download could be caused by the app or your internet connection, not just weak Wi-Fi behind the wall.
Compare the download near the router with the one in the target room. If you see an Audible error message, also check your Wi-Fi connection and the service’s guidance.
FRITZ! repeaters can extend compatible existing FRITZ! networks. The FRITZ!Mesh Set 2700 is also described as a standalone set that can be used behind another router.
Deco systems such as the Deco X50 offer wireless connections between units, with Ethernet backhaul also available as an option.
The ZenWiFi XD5 is a mesh option for homes that want to use Ethernet connections between the units.
devolo offers both a Wi-Fi 7 mesh set and Magic Powerline with Wi-Fi as different ways to connect.
The eero 6+ is an app-guided mesh system with wired ports.
This Joybuy selection includes mesh sets for multiple Wi-Fi locations and options for extending an existing router. Before buying, check that you can place a node where it gets a strong enough signal, or that you have a suitable LAN connection.
No image available
For two mesh locations, with the units connected by Wi-Fi or through a compatible LAN setup.
Dual-band; two Gigabit WAN/LAN ports per unit; router and access point modes.
No image available
For multiple mesh locations and continued use of an existing router, provided access point mode suits your setup.
Dual-band; two Gigabit LAN/WAN ports per unit; three units.
No image available
For multiple mesh locations, with an existing modem or router included in your setup.
Dual-band; two Gigabit ports per unit; three units; app setup.
No image available
For two mesh locations, with an additional node set up through the app and placed somewhere with a suitable signal.
Dual-band; Gigabit Ethernet ports; app setup.
No image available
For two mesh locations where you also want to use wired connections on the units.
Dual-band; three Gigabit ports per unit; app setup.
Try downloading the same audiobook near the router first, then where you want to listen. If you see an Audible error message, also check your Wi-Fi connection and the guidance in the app. The Federal Network Agency’s broadband measurement tool checks your internet connection, not just the mesh connection to the target room.
This depends, among other things, on whether Deco is working in router or access point mode. In router mode, TP-Link says the satellite must connect to the main Deco’s LAN port or to a switch connected to it. Check the connection diagram for your specific system first.
Try the adapters in the sockets you plan to use, as performance can vary depending on the socket and sources of electrical interference. devolo also warns of possible interference with VDSL profiles 17a or 35b. This applies to the powerline connection, not to every wireless mesh system.
According to the Federal Network Agency, devices covered by the relevant EU harmonisation legislation and placed on the EU market must carry the CE marking. This marking isn’t independent proof of range or download speed.