Which scanner might suit you

35 mm photographers who want to edit their scans

If you want to scan selected black-and-white negatives on your computer and choose the greyscale output and scan settings yourself, check the film holders, software and computer requirements. Plustek Germany says the OpticFilm 8300i SE offers 8- or 16-bit greyscale output and scans 35 mm film.

If space on your desk is limited

If you’d like to scan straight to an SD card without having a computer set up all the time, compare the scanner’s dimensions, file output and whether you’ll need to buy a memory card. reflecta says the x33-Scan saves JPEGs to SD; Kodak Photo Plus EU notes that an SD card is required to use the European SLIDE N SCAN, but isn’t included.

If you have several film formats

If your collection includes roll film or smaller formats as well as 35 mm, check that your negatives are supported by the formats and holders listed for the specific model. reflecta says the x66-Scan supports 120 and 127 film, among other formats; Kodak Photo Plus EU lists 135, 110 and 126 formats for the European SLIDE N SCAN.

What to look for when buying

First, work out which film formats you actually want to scan. Then compare the space you’ll need, the file output and how much work will be involved in retouching or scanning larger collections.

What to consider What to check Who it matters most to
Film format and holders Check your film type and image format against the holders supplied with the specific model. Plustek Germany specifies the OpticFilm 8300i SE for 35 mm film; reflecta lists 120 and 127 formats for the x66-Scan. Kodak Photo Plus EU lists 135, 110 and 126 formats for the European SLIDE N SCAN. If I have roll film or other formats as well as 35 mm, I need suitable holders rather than a scanner that only covers part of my collection. Around 25% of consumers put format compatibility first.
Desk space and workflow As well as the scanner’s dimensions, check there’s room for the film holders and to operate the device, and consider its power, storage and computer requirements. reflecta says the x33-Scan and x66-Scan save JPEGs to SD; the OpticFilm 8300i SE needs to be connected to a PC. If my desk is short on space and I don’t want to keep a computer set up for scanning, I need to consider the whole setup, not just the scanner’s dimensions. Around 25% of consumers pay particular attention to the space required and how easy it is to get started.
Greyscale and file output Check the available greyscale output, file types and scan settings. Plustek Germany specifies 8- or 16-bit greyscale output; for reflecta models, compare the sensor specifications separately from any interpolated output figures. If I want to adjust brightness levels myself later, I need to know which files and settings the scanning process actually offers. Around 20% of consumers prioritise editable image files.
Dust and scratches Check which correction features are available for your specific film type and software version. Hamrick Software says infrared correction doesn’t work with silver-based black-and-white film, so check what other correction options are available. If I scan silver-based negatives, I don’t want to rely on an infrared feature that isn’t suitable for this type of film to remove dust and scratches. Around 20% of consumers pay particular attention to the amount of retouching required.
Time spent scanning lots of negatives Check that your film strips are compatible with the model’s feed mechanism, taking their length and condition into account. reflecta says the RPS 10S automatically transports compatible 35 mm strips containing 3 to 40 frames. If I have lots of strips to scan, I want to spend as little time as possible loading them one by one. Around 10% of consumers put throughput first.

Common buying misconceptions

  • Infrared works with every type of black-and-white film

    Infrared dust and flaw detection isn’t reliable with silver-based black-and-white film, so this feature may not be suitable for the film you intend to scan.

    Identify your film type and check which correction options are available in the specific software version. Hamrick Software explains the limitation with silver-based black-and-white film.

    Cleaning and retouching can take extra time.

  • More interpolated pixels mean more captured detail

    Interpolated output figures aren’t the same as sensor resolution. reflecta distinguishes between the x66-Scan’s 14 MP sensor and its interpolated 22 MP output.

    Compare the sensor or hardware specifications, file output and supported film formats separately.

  • Only the scanner itself takes up space

    With a PC-connected model, you’ll also need room for your computer and to handle the film. Standalone devices need space for operation and storage media, too.

    Measure the space you have, including room to insert the holders, and check the specific model’s power, computer and storage requirements.

    A PC-connected workflow also needs space for your computer and setup.

  • An SD card is enough for your only archive

    If your only storage medium is lost or damaged, you could lose the scans saved on it, too.

    Copy important images to another medium and check that you can open the copies. Germany’s Federal Office for Information Security recommends keeping an additional backup.

    An additional backup needs more storage space or another storage medium.

Brands to consider

Plustek

According to Plustek Germany, the OpticFilm 8300i SE is a PC-connected scanner for 35 mm film with adjustable greyscale output.

  • Plustek specifies 8- or 16-bit greyscale output and dimensions of 120 × 272 × 119 mm.
  • Check the computer and software requirements. Infrared retouching isn’t a reliable reason to buy for silver-based black-and-white film.

reflecta

According to reflecta, its range includes standalone scanners for different film formats and PC-connected models with automatic film transport.

  • The x33-Scan and x66-Scan save JPEG files to SD, according to the manufacturer. The x66-Scan supports 120 and 127 formats, among others, while the RPS 10S automatically transports compatible longer film strips.
  • Formats, dimensions and workflows vary by model. The RPS 10S’s infrared feature is also not a guaranteed retouching benefit for silver-based black-and-white film.

Kodak Photo Plus

According to Kodak Photo Plus, the European SLIDE N SCAN, with its 5-inch display, is a standalone option for black-and-white negatives in 135, 110 and 126 formats.

  • Kodak Photo Plus lists compatible adapters and direct saving to an SD card.
  • The EU product page says an SD card is required to use the scanner, but isn’t included. These details apply to this version and shouldn’t be assumed to apply to other variants.

Rollei

According to Rollei’s German product page, the PDF-S 240 SE scans compatible negatives and slides, as well as digitising printed photos.

  • Rollei lists computer-free operation, a memory card slot and support for printed photos up to 13 × 18 cm.
  • The stated 2400 dpi resolution is interpolated. The product page lists different megapixel figures, so don’t rely on a single sensor value.

Related products from Joybuy

Related products will be available soon.

Frequently asked questions

Can I scan 120 black-and-white film with a 35 mm film scanner?

Not just because it’s called a ‘film scanner’. Plustek Germany specifies the OpticFilm 8300i SE for 35 mm film; reflecta explicitly lists 120 formats from 6 × 4.5 to 6 × 9 cm for the x66-Scan. Check your image format and that the scanner has a suitable holder.

Do I need to keep a computer running on a small desk?

Not with every model: reflecta says the x33-Scan and x66-Scan save JPEGs directly to an SD card. Plustek’s OpticFilm 8300i SE needs to be connected to a PC, so check the system requirements and the space you have available.

Will an infrared channel automatically remove dust from black-and-white negatives?

You shouldn’t assume it will with silver-based black-and-white film. Hamrick Software explains the limitations of infrared correction; before you buy, check that your specific software version includes the alternative feature you need.

What extra purchases and storage should I plan for?

Check whether a standalone device needs a memory card that you’ll have to buy separately, and which software comes with a PC scanner. Kodak Photo Plus EU says the European SLIDE N SCAN needs an SD card, which isn’t included. For important scans, Germany’s Federal Office for Information Security recommends keeping an additional backup copy.