Which scanning workflow is right for you?

Scanning at different workstations

If you digitise negatives in different locations, choose between scanning directly to a laptop and using a standalone device with a memory card. Check the power source, connections and file transfer options for the specific model. For example, reflecta says the x44-Scan saves JPEG files to an SD card.

Editing black-and-white images in detail

If you want to assess tonal values and visible defects after scanning, check the file and software workflow. Plustek also describes the OpticFilm 8200i SE as suitable for black-and-white film. With conventional silver-based black-and-white film, however, you shouldn’t rely on an infrared channel to remove dust automatically.

Archiving negatives in different film formats

If your collection includes formats beyond 35mm, check each film format against the specific model and its holders. reflecta lists 120 film among the formats supported by the x66-Scan, for example. That doesn’t mean other scanners or versions support the same formats.

What should you look for when buying?

First decide whether you want your laptop running while you scan. Then check the file workflow, power supply and film holders, and consider how much work is involved when scanning several images.

What matters What to check before buying Who is it important to?
Portable set-up and power Check the power source for the specific model, and whether scanning requires a laptop or can be done independently with a memory card. If I scan in different locations, I want to know whether I need my laptop during scanning and how to transfer the files. Around 33% of consumers prioritise a straightforward portable set-up.
Editing and dust correction Compare the output format and included software. For conventional silver-based black-and-white film, don’t count on infrared correction to remove defects reliably and automatically. If I want to assess the tonal values and visible defects in my scans, I look for suitable files and check what software is actually included. Around 27% of consumers prioritise editing their black-and-white scans.
Film formats and holders Check that the film type, image format and supplied holders match your originals. If I want to archive negatives in several formats, I need holders that fit those originals. Around 20% of consumers prioritise support for a range of formats.
Scanning lots of images Check whether the model handles individual frames or compatible film strips, and factor in loading, checking and saving the files. If I scan lots of images in a row, I want to understand the repeated steps and the overall workflow. Around 20% of consumers prioritise spending less time on batches.

Common buying misconceptions

  • An infrared channel removes dust from every type of black-and-white film

    With conventional silver-based black-and-white film, you can’t rely on infrared correction in the same way as with colour film.

    Plan to clean your originals and allow for possible software-based retouching, regardless of whether the scanner has an infrared feature. Check exactly which software is included.

    Cleaning and retouching can take extra time.

  • Interpolated image values are the same as sensor resolution

    The highest figure listed may refer to an interpolated output rather than the sensor’s native resolution.

    Check whether the specifications refer to sensor resolution or interpolation, and consider the file workflow you need.

  • A USB connection automatically powers the scanner

    The USB connection and power supply may be listed separately. For example, reflecta specifies a USB connection and a 12 V power supply for the RPS 10S.

    Check the power supply and what’s included with the specific model before planning your portable scanning set-up.

  • The scan time per image is the time it takes to digitise an entire archive

    The stated scan time per image doesn’t necessarily include loading, checking, transferring and saving a large number of scans.

    Compare the full process with your film strips and allow time to check and save the files.

    Even with a suitable feed mechanism, checking and saving files remain part of the workflow.

A guide to manufacturers

Plustek

The OpticFilm 8200i SE is a computer-connected 35mm workflow, which Plustek also describes as suitable for black-and-white film.

  • Plustek lists 7,200 dpi and included SilverFast software for this model; these are the manufacturer’s specifications.
  • For conventional silver-based black-and-white film, the infrared channel is not a reliable way to remove dust automatically.

reflecta

The models described support different workflows: standalone scanning to an SD card, additional film formats or computer-connected processing.

  • According to reflecta, the x44-Scan saves JPEG files to an SD card, while the x66-Scan supports formats including 120 film.
  • Formats, power supplies and workflows vary by model. reflecta lists a 12 V power supply for the RPS 10S.

KODAK Photo Plus

The SLIDE-N-SCAN version described combines standalone storage with holders for several small film formats.

  • For this version, KODAK Photo Plus lists black-and-white negatives in 135, 110 and 126 formats.
  • The product specifications distinguish between a 14 MP sensor and an interpolated output of 22 MP.

Rollei

According to Rollei, the PDF-S 240 SE scans negatives, slides and printed photos, and can work without a computer.

  • For this model, Rollei distinguishes between 1,800 dpi and up to 2,400 dpi interpolated.
  • Check the film format, power supply and space needed for your portable set-up. The additional photo workflow is only relevant if you also want to digitise printed photos.

Somikon

The SD-1700 is described as a standalone photo, slide and negative scanner for a workstation without a computer permanently connected.

  • The SD-1700 product manual lists a battery and an SD memory card.
  • For the version covered by the manual, SD or SDHC cards with a maximum capacity of 32 GB are specified. Check that the holders suit your black-and-white originals.

Suitable products on Joybuy

Suitable products coming soon.

Frequently asked questions

Can I edit scans directly on my laptop?

With a computer-connected model such as the OpticFilm 8200i SE described by Plustek, your laptop is part of the scanning workflow. A standalone reflecta x44-Scan first saves JPEG files to an SD card, which you can then transfer. Before buying, check that the software version and connections are compatible with your laptop.

How should I deal with dust on black-and-white negatives?

For conventional silver-based black-and-white film, don’t expect the same infrared correction as with colour film. Cleaning your originals and allowing for possible software-based retouching should therefore be part of your workflow planning. LaserSoft Imaging describes a software-based feature for black-and-white film too; check whether it’s included in the software you use.

Do I need a memory card for a standalone scanner?

It depends on the specific model. reflecta says the x44-Scan saves JPEG files directly to an SD card. The Somikon SD-1700 version covered by the product manual supports SD or SDHC cards up to 32 GB. Check the card format and what’s included with the specific device.

What are my rights when buying a scanner online in Germany?

For a typical online purchase from a trader, you generally have 14 days from receiving the goods to cancel, although exceptions may apply. The European Union’s consumer information also notes a statutory minimum guarantee of two years from receipt. These rights are separate from any additional voluntary manufacturer’s warranty.