Which workflow is right for your group?

35 mm archive group

If you mainly have 35 mm strips, weigh up how much control on a computer is worth the effort of repeatedly loading film.

Group with a mix of film formats

If you also want to scan 120 roll film or older small formats, first identify the formats you have, then choose the right holders for the specific model.

Group without a dedicated scanning PC

If you want to scan directly on the device and then store the files together, check the file format and SD card, and plan how to transfer the files to the group folder.

What should your group look for when buying?

Start by checking your film formats and holders, then consider how much effort each strip will take to scan. Finally, decide how you want to edit and store the files together.

Consideration What to look for when buying Who it matters most to
Film format and holders Identify the film format and frame size, then check which formats the specific model supports and which holders are included. If I want to scan different types of negatives, I first check that the film and holder are compatible. Around 33% of consumers put format compatibility first.
Throughput and loading Check how many frames can be scanned per load and whether the scanner suits the strips you have, rather than focusing only on the stated scan time. With a larger collection, I care about how often someone will need to reload the scanner. Around 25% of consumers prioritise throughput.
Files and dust correction Check the output format and software you need. With traditional silver-based black-and-white film, don't rely on infrared correction as a guaranteed way to remove dust. If the group wants to edit files later, I need the right output format and a practical way to deal with dust. Around 25% of consumers put control over their files first.
Scanning without a PC Check the memory card requirements and file format, and decide how to transfer the files to shared storage afterwards. If we don't want a computer at the scanning station, direct saving matters to me. Around 17% of consumers prioritise scanning without a PC.

Which assumptions should you avoid?

  • Assuming infrared dust removal works for every type of black-and-white film

    With traditional silver-based black-and-white film, standard infrared-based defect detection is not a reliable way to remove dust.

    Check how correction methods work with different film types, and assess a test scan of your own film.

    Depending on the results, you may need to do additional retouching by hand or with software.

  • Assuming automatic batch scanning means you can scan your whole collection unattended

    According to the manufacturer, the Plustek OpticFilm 135i scans six frames on a strip per scan run. F.A.Z. Kaufkompass notes that the model is less suitable for larger quantities.

    Before buying, estimate how many times you'll need to load your collection. Longer film transport is only relevant for strips the scanner is designed to handle.

  • Confusing interpolated megapixels with sensor resolution

    For the models mentioned, sensor resolution and interpolated output are listed separately. A higher output figure does not automatically mean a higher-resolution sensor.

    Check the sensor and output specifications separately, and test the file format and scan results with your own negatives.

  • Assuming the format list for a discontinued model means it's currently available new

    Epson Germany lists the Perfection V600 Photo as discontinued, even though the model is shown with film holders for various formats.

    For any specific listing, check the model, condition, included holders and software individually.

    With a second-hand model, finding a complete set with the right holders may take extra effort.

Which brands and models are worth considering?

Plustek

The OpticFilm 135i is a PC-connected film scanner for 35 mm strips.

  • Plustek specifies six frames per strip and scan run.
  • F.A.Z. Kaufkompass highlights the repeated loading involved and considers the model less suitable for larger quantities.

reflecta

The x66-Scan works without a scanning PC, while the RPS 10S is a PC-connected scanner for compatible 35 mm strips.

  • reflecta specifies JPEG output to an SD card and support for formats including Type 120 on the x66-Scan. For the RPS 10S, the manufacturer specifies transport for up to 40 frames and DNG output.
  • These models are designed for different tasks. The RPS 10S's infrared retouching is not a dust-correction advantage for traditional silver-based black-and-white film.

KODAK Photo Plus

The SLIDE N SCAN is a stand-alone option for the black-and-white formats 135, 110 and 126 listed by the manufacturer.

  • The product page lists adapters and direct saving to an SD card.
  • The stated 22 MP output is interpolated; the sensor is listed as 14 MP. The product page does not list an adapter for 120 roll film.

Epson

The Perfection V600 Photo is a flatbed option with film holders for certain formats.

  • Epson lists holders for 35 mm and 120/220 film up to 6 × 22 cm.
  • Epson Germany marks this specific model as discontinued; this information does not indicate the availability of other models.

VALOI

The easy35 v2 is a digitising system that uses a compatible camera you already own and a macro lens. It is not a stand-alone scanner.

  • VALOI specifies a built-in light source and support for 35 mm and smaller formats.
  • You'll still need a compatible camera and a suitable macro lens. The manufacturer's claims about speed and image quality are just that: manufacturer claims.

Products to suit your needs on Joybuy

Related products coming soon.

Frequently asked questions

Is a standard document scanner good enough for negatives?

To scan transparent negatives, you'll need a transparency unit or a scanner specifically designed for negatives. Check that the particular device supports film, rather than just looking at the size of its glass bed.

Should we plan to use infrared dust correction for traditional black-and-white negatives?

Don't rely on it as a dependable advantage: LaserSoft Imaging explains that infrared-based iSRD cannot be used with silver-based black-and-white emulsions. Software-based correction is a different method and should be tested with your own film.

What should we prepare at a shared scanning station?

Decide who will load the film, how you'll label the strips and files, and where files from SD cards will be transferred. For PC-connected devices, check the operating system and software requirements for the specific model. For stand-alone devices, check the memory card requirements.

What else might we need for our scanning workflow?

Depending on how you work, you may need a compatible SD card, suitable film holders or software. To digitise film with a camera, you'll need a compatible camera and a macro lens. Check what's included and what each model requires.

Can we simply publish scanned group photos in Germany?

No. Owning a negative does not automatically give you permission to publish the image. Under § 22 KunstUrhG, consent from the person depicted is generally required to distribute or publicly display an image; § 23 sets out exceptions, but limits them where the person depicted has a legitimate interest. If you're processing personal data, you must also check that you have a lawful basis under the GDPR. Whether a particular image can be published depends, among other things, on the image itself and how you intend to use it.