Who are bookshelf speakers suitable for in a small living room?

TV and film soundtrack listeners

You want a compact stereo pair for both soundtracks and TV audio, so you’re comparing the connections on your TV and speakers.

Listeners short on space

You need to fit two speakers into a small living room and want to check their dimensions, the space available on a shelf or wall, and how the speakers connect to each other.

Listeners with an existing amplifier

You want to keep using your existing hi-fi equipment, so you’re comparing passive speakers with active pairs that don’t need a separate amplifier.

What should you look for when buying?

Active stereo pair

A good choice if: you don’t want to set up a separate amplifier and one of the speaker’s inputs is compatible with your TV or source device.

Bear in mind: connections and supported audio formats vary by model; HDMI ARC and eARC are not the same.

Passive speaker pair

A good choice if: you already have a suitable amplifier or receiver, or want to put together a separate system.

Bear in mind: you’ll need an amplifier, a way to connect to your TV and, where necessary, speaker cables to complete the setup.

What you need What to check before buying Who will find this important?
Connect a TV and source device Check that the TV connection matches the input on the specific speaker model, and check the TV’s audio output settings. If I want to listen to film soundtracks through my TV, the connection needs to work with both devices. This is the main consideration for around 33% of consumers.
Fit in two speakers Measure both spaces and take shelf depth, cable routes and any brackets you’ll need into account. If there’s very little free space in my living room, I want to know whether both speakers will fit in their intended positions, cables and all. This space consideration comes first for around 27% of consumers.
Bass and future expansion Check whether the model has a subwoofer output and what you’ll need to connect one. If I want to add more bass for film soundtracks later, I’ll need a suitable connection and space for another device. The option to add more bass is the main consideration for around 20% of consumers.
Plan a complete system Check the amplifier you already have and its stated compatibility; factor in any missing equipment and cables. If I want to keep using my existing hi-fi equipment, I need to know whether I already have a suitable amplifier. The system components they’ll need are the main consideration for around 20% of consumers.

Common misconceptions when buying

  • ‘Digital TV connection’ automatically means HDMI ARC

    An optical input and HDMI ARC are different connections. The Edifier R1280DBs has an optical input, while KEF lists HDMI ARC for the LSX II LT.

    Before choosing a pair, compare the actual sockets and audio settings on your TV and speakers.

  • The price of passive speakers is the price of the whole system

    Passive speakers such as the Teufel ULTIMA 20 Mk4 are designed to be used with an amplifier or receiver. Without suitable amplification, the system is incomplete.

    Compare complete systems that work with your source device, rather than looking at the speaker pairs alone.

  • A subwoofer output means a subwoofer is included

    An output for connecting an additional subwoofer is not the same as a subwoofer being included with the stereo pair.

    First, plan where to put the two speakers, then decide whether you’d like the option of adding more bass later.

    A separate subwoofer takes up extra space, so make sure it fits into your room layout.

Brands and models to consider

Teufel

The active ULTIMA 25 AKTIV 2 and passive ULTIMA 20 Mk4 are two distinct models to consider.

  • Teufel lists HDMI TV ARC/eARC and Optical In for the ULTIMA 25 AKTIV 2. The passive ULTIMA 20 Mk4 is designed for use with an amplifier or receiver.
  • These connection details describe the features of these models and don’t compare their sound quality.

Nubert

Nubert describes the nuPro SP-200 as an active stereo pair for music and TV.

  • Nubert lists HDMI eARC and Dolby and DTS playback for this model.
  • These features don’t prove that it performs better in independent comparisons.

KEF

According to the manufacturer, the LSX II LT combines a TV connection with other inputs and streaming features.

  • KEF lists HDMI ARC, an optical input and a subwoofer output for the LSX II LT.
  • When planning where to put the speakers, remember to allow for the cable connecting them.

Edifier

The R1280DBs is an active option if an optical connection, rather than HDMI, suits your planned setup.

  • Edifier lists Optical, Coaxial, Line In and Sub Out for the R1280DBs.
  • An optical input is not an HDMI ARC connection. Check your TV’s audio output and how you want to control the volume.

DALI

DALI’s KUPID is a bookshelf speaker that the manufacturer describes as suitable for compact setups.

  • DALI says a wall bracket is included with the KUPID.
  • The manufacturer’s opinions on sound and value are not independent measurements.

Suitable products at Joybuy

Similar products will be available soon.

Frequently asked questions

Is Bluetooth enough to connect to my TV?

There’s no single answer that applies to every TV. Check its audio outputs and the inputs on the specific speaker pair. Depending on the model, manufacturers list HDMI ARC/eARC or an optical input.

What can I check if there’s no sound from the speakers?

For the Edifier R1280DBs, first check the power supply, selected input and cable connection, and make sure a signal is being sent. For other models, follow the guidance in the relevant manual.

Do I need extra equipment for passive bookshelf speakers?

Yes. You need a suitable amplifier or receiver for the passive Teufel ULTIMA 20 Mk4. If you already have one, check its stated compatibility; Teufel gives the ULTIMA series an impedance of 4–8 Ohm.

What are the rules in Germany for faulty goods and disposing of old speakers?

The German Federal Government states that faulty goods are generally covered by a two-year statutory warranty against the retailer; this is separate from any voluntary manufacturer’s guarantee. Under Section 10 of the Electrical and Electronic Equipment Act (ElektroG), electrical equipment that has become waste must be collected separately rather than disposed of with unsorted municipal waste. Retailers’ take-back obligations depend on the legal requirements and the circumstances of the return.