Who could benefit from a remote shutter release?

Photographers with a fixed tabletop setup

If you’re photographing several loaves from the same camera position, try the timer first to avoid touching the camera as you take the shot. Canon UK describes the self-timer as a way to prevent camera shake caused by pressing the shutter button.

Photographers who move their setup around

If you’re moving between the camera, bread and props, compatible wireless controls can make your workflow easier. Canon UK says the BR-E1 can pair with compatible Bluetooth cameras; check support for your exact model.

Buyers who aren’t sure about compatibility

If you don’t yet know your camera’s connection type or remote-control options, start by noting down its full model name. Check the manufacturer’s details for the connection, wireless technology and any adapters you might need. For example, Fujifilm lists an additional adapter for certain camera models when using the RR-100.

What should you look for when buying?

Camera’s built-in timer

Suitable if: your camera has this feature and a short delay fits your workflow.

Consider: You won’t need an extra shutter release, but you’ll need to allow for the delay.

Wired remote

Suitable if: your camera stays in one place, you’re close to the tripod, and your model and connection are supported.

Consider: The cable limits where you can operate it from and could get in the way on a small table.

Wireless remote

Suitable if: you’ll be moving away from the camera to arrange your setup and your camera supports that specific wireless accessory.

Consider: The wireless technology and operating position depend on the model. Canon describes the RC-6 as an infrared remote that you operate from in front of the camera.

Camera app

Suitable if: your camera supports the remote shooting you need through a compatible app.

Consider: Setup and available features depend on your camera model.

Buying priority What to check Who might find it important?
Compatibility Check your full camera model against the connection or wireless technology, and see whether you’ll need an adapter. When I’m looking for an accessory, I want to know whether it works with my exact camera. Around 36% of consumers put compatibility first.
Taking a shot without touching the camera Compare the timer, a compatible app and a wired remote; consider cable length and space on the table. Sony UK lists a cable length of 800 mm for the RM-VPR1. When my camera stays in the same place for repeated shots, I don’t want to touch it when taking a photo. Around 29% of consumers prioritise taking a shot without touching the camera.
Freedom to move Check support for your camera model and the right operating position; if you’re using infrared, bear in mind that you’ll need to be in front of the camera. When I move between the tripod and the bread table, I want to be able to take a shot from wherever I’m standing. Around 21% of consumers prioritise being able to move around as they arrange their setup.
Making use of existing features Try the timer and a compatible app as part of your intended shooting workflow before choosing an accessory. If a delay works for me or my camera supports a suitable app, I don’t want to buy a separate device. Around 14% of consumers prioritise using the shutter options they already have.

Avoiding common buying mistakes

  • Buying based on the camera brand alone

    Even accessories from the same brand may only work with certain camera models or connections. Fujifilm lists specific compatible camera models for the RR-100, and says that certain models need an additional 2.5 mm to 3.5 mm adapter.

    Before placing your order, check the full model name, the manufacturer’s compatibility list and the connection. Check whether you’ll also need the specified adapter.

  • Assuming every wireless remote lets you operate it from anywhere

    Where you can operate a remote from depends on the technology it uses. Canon describes the RC-6 as an infrared remote that you operate from in front of the camera; this doesn’t necessarily apply to other wireless models.

    Check that the position you plan to use while arranging your bread works with the accessory’s controls and your camera’s compatibility.

  • Overlooking cable length in a cramped setup

    Cable length determines how far you can move from the camera to take a shot. Sony lists a cable length of 800 mm for the RM-VPR1.

    Measure the distance from the camera’s connection to the position where you want to operate the remote, using your actual setup.

A guide to compatible brands

Canon

Depending on the model, compatible Canon cameras offer wired, infrared and Bluetooth controls, as well as remote control via an app.

  • Canon UK describes the RC-6 as an infrared remote that you operate from in front of the camera.
  • Support for the RC-6, BR-E1 or app depends on the model; check the details for your camera.

Nikon

Nikon offers the MC-DC3 as a wired option and the ML-L7 as a Bluetooth option, each for compatible cameras.

  • Nikon says the MC-DC3 lets you half-press or fully press the shutter button; according to Nikon, the ML-L7 has buttons for photos and video.
  • This information doesn’t mean they’re compatible with every Nikon camera.

Fujifilm

The RR-100 is a wired option for the X and GFX cameras listed by Fujifilm.

  • Fujifilm publishes a list of compatible camera models.
  • For certain models, Fujifilm also specifies a 2.5 mm to 3.5 mm adapter; you won’t necessarily need one for every camera.

Sony

Sony offers the RM-VPR1 as a wired option and the RMT-P1BT as a Bluetooth control for compatible cameras; an app may also be an option.

  • Sony lists a cable length of 800 mm for the RM-VPR1. According to Sony, the RMT-P1BT uses the Bluetooth receiver built into the camera.
  • App features and accessory compatibility depend on the camera model.

Joybuy products for smartphone photography

The products below are smartphone holders or smartphone tripods with remotes. They may suit your bread setup if you’re taking photos with a smartphone rather than a camera; they’re not remote shutter releases for interchangeable-lens cameras.

Verbex K60 Black smartphone tripod with remote

Verbex K60 Black smartphone tripod with remote

For tabletop smartphone photography when you want to prop up your phone and take photos remotely.

Extendable selfie stick with tripod, smartphone holder and zoom remote.

View at Joybuy
3-in-1 Bluetooth selfie stick with tripod and remote

3-in-1 Bluetooth selfie stick with tripod

For smartphone photography when you want to prop up your phone and take photos using a remote.

With a 360° rotating phone holder; the product name lists it as suitable for iPhone, Samsung and Android.

View at Joybuy
Black magnetic smartphone grip with remote and fill light

Black magnetic smartphone grip with remote and fill light

For remote smartphone photography when you’d prefer a detachable grip to a traditional camera cable.

With a 1/4-inch tripod thread and fill light.

View at Joybuy
360° smartphone gimbal with two selfie lights and remote

360° smartphone gimbal with two selfie lights

For smartphone photos or videos when you want to use a detachable remote and tripod-style design.

The product name lists two selfie lights, face recognition, automatic 360° tracking and gesture control.

View at Joybuy
Ulanzi JJ02 smartphone tripod with Bluetooth remote

Ulanzi JJ02 smartphone tripod with remote

For tabletop smartphone photography when you want to prop up your phone and take photos remotely.

Extendable selfie stick with handle, Bluetooth remote and two cold shoe mounts. Place the stand on a stable surface and secure your smartphone properly.

View at Joybuy

Frequently asked questions

Do I need a separate remote shutter release to photograph bread?

Not necessarily. If your camera has a suitable timer or supports remote control from a smartphone, try that first as part of your planned shooting workflow.

How can I check whether a wired remote will work with my camera?

Check your camera’s full model name against the manufacturer’s accessory list, and check the connection. For the RR-100, Fujifilm specifically says that certain camera models also need a 2.5 mm to 3.5 mm adapter.

What should I check after using a battery-powered remote?

Check the battery and what’s included with the specific model; Canon says the RC-6 comes with a CR2032 battery. According to the German Environment Agency, used batteries shouldn’t go in household waste; take them to a shop’s battery recycling box or a local collection point.

Who should I contact if my remote shutter release is faulty?

If you buy from a business seller in the EU, you’re entitled to a legal guarantee of at least two years from the date you receive the goods; the seller is responsible. Any additional manufacturer’s guarantee doesn’t replace this right.