Who is this buying guide for?

Teams sharing a CAD workstation

You need clear rules about who edits project files to prevent different versions from conflicting. Autodesk and SOLIDWORKS describe file locking and check-out as features of their respective file-access or data-management systems.

People responsible for CAD backups

You want to store project versions separately and check that they can be restored, rather than treating your only working drive as a backup. The German Federal Office for Information Security provides guidance on data backup and recovery.

People working with large CAD projects

You often need to balance frequent file transfers against the storage space required, while also checking which connections and cables are available at your workstation. Samsung Germany and Seagate offer different connection and drive options across their respective product ranges.

What should you look for when buying?

First decide how you’ll manage collaboration and separate backups. Then choose the drive type, capacity and connection to suit your workflow.

External SSD for active projects

A good fit if: you regularly open or transfer project files at a connected workstation, and the host and cable are compatible with the drive.

Bear in mind: manufacturers’ peak figures don’t guarantee the speed you’ll get in a specific CAD workflow. An SSD won’t replace file locking or a separate backup.

External HDD for large archives

A good fit if: storage space for project versions or backup copies is your main priority, and longer transfer times are acceptable.

Bear in mind: CHIP describes HDDs as slower and more sensitive to knocks than SSDs. Desktop models such as the Seagate Expansion also need a power supply.

Centrally managed storage alongside your drive

A good fit if: several people edit the same files, or you need traceable versions and access permissions.

Bear in mind: the workflow needs to be set up to suit the CAD software you use. An external drive doesn’t provide check-out or file locking by itself.

Buying priority What to check Who is it important to?
Collaborative editing Establish whether one person or several people will edit the same files; check how file locking and version control work in your workflow. If several people change the same files on a shared computer, I want to prevent overwriting and make responsibilities clear. Around 26% of consumers would make collaboration their top buying priority.
Recoverable backup Allow space for separate copies and test restoring a complete project folder, including its references. After a fault or accidental deletion, I want to be able to restore a complete project version, including its references. Around 26% of consumers would put a recoverable backup first.
Storage for project versions Assess your current files and how long you plan to keep them; compare the stated capacity with the option you need. If I need to keep several project versions or versions that are growing in size, I need enough space without buying more capacity than necessary. Around 21% of consumers would make storage capacity their top buying priority.
Transfer speed and connection Check the USB port at your workstation, the cable you need and how often you copy files. If I transfer project files regularly, I want a connection that works with the host at my workstation. Around 16% of consumers would put transfer speed and connection first.
Protecting sensitive project information Check access rules and encryption that works with your workstation; consider key management and recovery. For sensitive project files, I want to restrict access to the drive I carry with me and consider how it will be unlocked on a shared computer. Around 11% of consumers would make protecting confidential data their top buying priority.

Common buying and usage mistakes

  • Treating your only working drive as a backup

    A backup is only useful if you can actually restore your project after a failure or accidental deletion.

    Keep a separate copy and test restoring a CAD project, including its references.

  • Assuming USB storage provides file locking or version control

    The storage connection doesn’t manage simultaneous changes. For AutoCAD file locking, Autodesk refers to the operating system or file-access software; SOLIDWORKS describes check-out and locking as part of its functionality.

    Set clear editing rules and, if people will be working in parallel, check which locking and version-control features the complete workflow offers.

    Reconciling conflicting file versions later takes extra time.

  • Relying on advertised SSD peak speeds without checking the host

    Transfer speeds depend on factors including the host and cable. Samsung’s peak figures for the T7 Shield require a compatible USB 3.2 Gen 2 host, a suitable cable and UASP.

    Check the connection and cable at your workstation before choosing a drive based on its peak speeds.

  • Copying only the main CAD files when moving a project

    External references may be missing after a move if they use absolute paths. Autodesk notes that these paths need to be updated after files are moved.

    After copying the files, open the project and check that all references are accessible.

Key brands at a glance

Samsung

The Portable SSD T7 Shield is an option for projects you carry around regularly, if you need a rugged SSD and a compatible high-speed host.

  • For the German 2 TB model MU-PE2T0S/EU, Samsung Germany quotes read speeds of up to 1,050 MB/s and write speeds of up to 1,000 MB/s, as well as IP65 under controlled test conditions.
  • Samsung requires a compatible USB 3.2 Gen 2 host, a suitable cable and UASP to achieve the peak speeds. The product page states that liquid and dust damage aren’t covered by the warranty; these are manufacturer figures, not CAD benchmark results.

Kingston

The XS1000 is a compact SSD option that can work with USB-A and USB-C ports at your workstation.

  • Kingston lists capacities of up to 2 TB, USB 3.2 Gen 2 and read speeds of up to 1,050 MB/s for the XS1000. According to Kingston, the box includes a USB-C to USB-A cable and an adapter.
  • The product’s interface and accessories don’t mean that the SSD provides version control for CAD projects.

Seagate

The Expansion Desktop is a stationary HDD option if you need plenty of storage for your files.

  • Seagate lists capacities of up to 28 TB for the product range, with a power supply and USB cable for connection.
  • Capacity and features vary by model. A single drive isn’t automatically a separate backup, or one that has been tested for recovery.

Intenso

The SSD Premium is a compact SSD option, while the Memory Drive offers a portable HDD alternative from the same brand.

  • Intenso lists capacities of up to 2 TB and a maximum data transfer rate of 500 MB/s for the SSD Premium. The data sheet specifies exFAT and cables for USB-A and USB-C.
  • These figures don’t guarantee a particular speed or file permissions at a specific CAD workstation.

iStorage

The diskAshur PRO² is a specialist HDD or SSD option if you want to protect a portable drive with a PIN.

  • iStorage lists PIN authentication and AES-XTS 256-bit hardware encryption as product features.
  • The German Federal Commissioner for Data Protection and Freedom of Information points out that drive encryption won’t protect your data if the device is switched on or unlocked. It therefore doesn’t replace workstation access rules or a case-specific data protection assessment.

Joybuy products for active CAD projects

These Joybuy products are external SSDs for active use and carrying CAD project files.

KEXIN external SSD, 256 GB

KEXIN external SSD, 256 GB

Suitable as a portable working drive for project files; an external drive doesn’t coordinate simultaneous editing.

USB 3.1; up to 500 MB/s according to the product listing; 256 GB.

View at Joybuy
Kexin M.2 SATA SSD, 256 GB

Kexin M.2 SATA SSD, 256 GB

This portable external SSD is an option for carrying work files; it doesn’t provide file locking or version control.

M.2 SATA; USB 3.1; up to 500 MB/s according to the product listing; 256 GB.

View at Joybuy
KEXIN external SSD, 512 GB

KEXIN external SSD, 512 GB

Suitable as a portable working drive for project files; an external drive doesn’t coordinate simultaneous editing.

USB 3.1; up to 500 MB/s according to the product listing; 512 GB.

View at Joybuy
MOVESPEED Portable SSD YSPSRX20M-1TTG, 1 TB

MOVESPEED Portable SSD YSPSRX20M-1TTG, 1 TB

This portable SSD is an option for frequent project transfers; a drive alone doesn’t manage collaborative editing.

USB 3.2 Gen 2×2; 1 TB; manufacturer figures of up to 2,060 MB/s read and 1,800 MB/s write.

These peak speeds are manufacturer figures, not measurements from a specific CAD workstation.

View at Joybuy
Samsung Portable SSD T7, 2 TB, Titanium Grey

Samsung Portable SSD T7, 2 TB, Titanium Grey

This portable SSD is an option if you regularly open or transfer project files; it doesn’t replace a separate backup or version control.

USB 3.2 Gen 2; 2 TB; manufacturer figures of up to 1,050 MB/s read and 1,000 MB/s write.

The product description lists cables for USB-C and USB-A ports; check compatibility with your specific workstation.

View at Joybuy

Frequently asked questions

Can an external drive coordinate CAD files that are being edited at the same time?

Not by simply connecting it. For AutoCAD file locking, Autodesk refers to the operating system or file-access software; SOLIDWORKS describes check-out and locking as features of its PDM system. Check the workflow for the CAD software you actually use.

What should I check after moving a CAD project folder?

Open the drawings and check the external references. Autodesk explains that absolute paths may no longer work after a move and may need to be updated.

Is the manufacturer’s warranty enough to protect against data loss?

No, a warranty doesn’t replace a separate, tested backup. Seagate states that its limited warranty generally doesn’t cover data loss or data recovery costs, unless the specified Rescue plan has been purchased. Check the terms for the model you choose.

Is encryption a legal requirement for every CAD project in Germany?

The type of CAD file alone doesn’t create a blanket requirement. If personal data is being processed, the German Federal Commissioner for Data Protection and Freedom of Information says that technical and organisational measures should be chosen to match the risk; encryption may be one option. What’s required in a particular case depends on the data and how it is processed.

Can I use BitLocker To Go on a shared Windows computer?

Check the Windows edition and your IT department’s requirements. Microsoft lists BitLocker drive encryption for Pro, Enterprise and Education, but not Home, and includes removable drives under BitLocker To Go. Store the recovery key somewhere it will be available if you need it.