Which option is right for you?

Photographers using a fixed tripod setup

If you want to photograph your linocut using the same composition each time, a compatible wired remote can help you take the shot without touching the camera. You’ll still need to consider alignment and even lighting separately.

Photographers rearranging their printmaking table

If you change the print, white background or lighting between shots, a compatible Bluetooth remote or wireless trigger set can make it easier to take photos from your tripod. Check that it supports your camera model first.

Occasional shots without extra accessories

If you’re only taking a few photos, try your camera’s self-timer or an app that’s explicitly supported. The features available in the app depend on your camera model.

What should you look for when buying?

First, check that the remote is compatible with your camera. For a fixed reproduction setup, taking the shot without touching the camera is a separate consideration from alignment and lighting. Guidance from Museums Brandenburg on reproducing prints treats them as subjects for photography.

Self-timer

A good fit if: Your camera offers a suitable delay and you can wait briefly after focusing.

The trade-off: You don’t need an extra device, but you’ll have to wait for the shot. Sony describes a 2-second self-timer for compatible cameras; availability depends on the model.

Camera app

A good fit if: Your camera supports remote shooting via an app and you want to check the composition or focus on your mobile phone.

The trade-off: Available features in Canon Camera Connect vary by camera.

Wired remote shutter release

A good fit if: You want to take the shot from a fixed tripod position and your camera and connector are compatible with the model you choose.

The trade-off: The cable length and plug determine where you can operate it from. Canon lists an 80 cm cable and an N3 interface for the RS-80N3.

Bluetooth remote

A good fit if: You’d rather not stay by the tripod while arranging your print, and your camera and remote are explicitly listed as compatible.

The trade-off: Pairing and battery life are part of using the remote. Canon’s range of up to 5 m applies to the BR-E1, not to Bluetooth remotes in general.

Wireless trigger set with camera receiver

A good fit if: You want to take photos from further away and have a suitable cable for your camera’s connector.

The trade-off: The Rollei Wireless Remote Shutter Release 28146 still requires a compatible camera cable, even though it operates wirelessly.

Buying criterion What to check Who is this important to?
Compatibility Check the exact camera model against the compatibility list. For wired remotes, check the connector too. I don’t want to buy a remote that doesn’t fit because of my camera model or connector. Around 36% of consumers say compatibility is their top buying priority.
Taking photos without touching the camera Compare a wired remote, self-timer or supported app against the features your camera offers. I don’t want to disturb the composition by touching the camera when I take the shot. Around 29% of consumers prioritise taking photos with as little camera shake as possible.
Freedom of movement Check that your specific Bluetooth remote is supported. For a wireless trigger set, check whether you’ll need a camera cable too. I want to adjust the print and lighting at the table without having to return to the tripod for every shot. Around 21% of consumers put freedom of movement first.
Making use of existing features Try the self-timer or an explicitly supported app, then check whether the available features suit your workflow. If I only take photos occasionally, I want to check first whether a feature on my camera will do the job. Around 14% of consumers prioritise avoiding the purchase of an extra accessory.

Common buying misconceptions

  • “It’s the same brand, so the remote will fit.”

    Even within the same brand, supported camera models and connectors can vary. The brand name alone doesn’t guarantee compatibility.

    Check the full model name and connector against the manufacturer’s information for that specific remote.

  • “Wireless” means there’s no need to connect anything to the camera.

    With a wireless trigger set, the handheld transmitter may work wirelessly, while the receiver still needs to connect to the camera using a compatible cable.

    Check the receiver, camera cable, connector and what’s included with the specific set.

    The Rollei Wireless Remote Shutter Release 28146 requires a compatible camera cable. Check whether it’s included in the version you choose.

  • A remote shutter release is all you need for a successful reproduction.

    Taking a photo without touching the camera won’t correct poor alignment, uneven lighting or incorrect focus.

    Align the camera and print so they’re parallel, and check the lighting and focus separately from how you take the shot. Guidance from Museums Brandenburg treats these as separate steps.

Brands to consider

Canon

For supported cameras, Canon offers both Bluetooth and wired remote shutter releases. Camera Connect is another option for compatible models.

  • Canon lists a range of up to 5 m for the BR-E1. For the RS-80N3, Canon specifies an 80 cm cable and an N3 interface.
  • These details apply to the specific models listed. Check camera compatibility, and remember that app features may vary.

Nikon

Nikon offers model-specific wired remotes such as the MC-DC2 and MC-DC3, as well as the ML-L7 Bluetooth remote control.

  • Nikon lists a shutter-release button among the features of the ML-L7.
  • The compatibility lists for the MC-DC2 and MC-DC3 differ, so the models aren’t interchangeable across the board. The ML-L7 doesn’t fit every Nikon camera either.

Sony

The RMT-P1BT is a Bluetooth remote control for specifically supported Sony cameras.

  • Sony describes this model as having a built-in camera receiver and a status indicator.
  • Check that your camera is compatible, enable the remote control function and pair the devices before use.

Rollei

The Wireless Remote Shutter Release 28146 is a wireless trigger set with an interval function for a camera receiver connected using a compatible cable.

  • Rollei lists a range of up to 50 m for this model.
  • Rollei says a compatible camera cable is required. The stated range is the manufacturer’s specification for this model, not proof of an advantage when photographing a print.

Fujifilm

Fujifilm lists the RR-100 as a wired remote shutter release for the X and GFX cameras specified for the model.

  • Fujifilm says it includes a cable for a 2.5 mm socket.
  • For the GFX100 II, GFX100RF, X-T50, X-S20, X-S10, X-E5, X-E4, X-T200 and X-M5, Fujifilm also specifies a third-party 2.5 to 3.5 mm adapter.

Suitable products at Joybuy

Related products will be available soon.

Frequently asked questions

How can I tell whether a remote shutter release is compatible with my camera?

Compare your camera’s full model name with the compatibility list for that specific remote. A wired remote must also have the right connector: Nikon, for example, lists the MC-DC2 and MC-DC3 for different camera models. Fujifilm specifies an additional adapter for certain RR-100 combinations.

What should I check if my Bluetooth remote won’t take a photo?

First, check that your specific camera model is supported. For the RMT-P1BT, Sony also advises enabling the Bluetooth remote control function, pairing the devices and checking the position of the LOCK switch. The menu steps may vary by camera.

Will a remote shutter release automatically make the white background and print evenly lit?

No. Guidance from Museums Brandenburg on reproducing prints treats parallel alignment, a stable camera setup and even lighting as separate steps. A remote shutter release lets you take the photo without touching the camera, but it doesn’t replace these steps.

What should I check about what’s included and what to do if something is faulty?

For a wireless trigger set, check whether the compatible camera cable is included. Rollei says it’s required for model 28146. In Germany, newly purchased faulty goods are generally covered by a two-year statutory guarantee against the seller, as explained by the consumer advice centre. A voluntary manufacturer’s guarantee is separate.

How should I dispose of a remote control and its battery in Germany?

The German Environment Agency recommends removing any detachable batteries before disposal and taking them separately from the device to a battery collection box.