For singing along at the campsite, a well-fitting, closed-back wired studio headphone is a good place to start. It blocks out more surrounding noise than an open-back model and reduces the risk of backing tracks leaking into the microphone when you record. Check your device’s headphone output and how the headphones fit your head. Isolation figures and impedance alone can’t guarantee the right volume or a comfortable fit.
Which features suit different listeners?
Singers using backing tracks at the campsite
If it’s not quiet around you all the time, a good fit and a closed-back design are important considerations. Focusrite recommends closed-back headphones to minimise room noise when recording vocals; Musikmachen explains the differences between closed-back and open-back designs.
Singers recording on the go
If you’re practising with a microphone and an audio interface, the headphone connection and signal path need to suit your setup. Focusrite describes direct monitoring as a way to listen to the incoming signal through the interface with virtually no delay.
Travellers with longer practice sessions
If you often pack your headphones away or wear them for long periods, consider foldability, padding and how they fit you personally. beyerdynamic, Sennheiser and Audio-Technica provide model-specific details about these features.
What should you look for when buying?
First, choose the design to suit your surroundings and whether you’ll be recording with a microphone. Then consider the connection, monitoring and fit during your practice sessions.
| Consideration |
What to look for |
Who is this important to? |
| Isolation |
Check for a closed-back design and well-sealed ear pads. If you’re recording, also consider whether backing tracks might leak out of the ear cups. |
If conversations or other noises at the campsite are distracting, I want to hear my voice and backing track without having to turn the volume up unnecessarily. That’s why around 36% of consumers put isolation first. |
| Connection and monitoring |
Check your device’s output and connector, and whether you need a 3.5 or 6.3 mm adapter. If you’re recording, check your interface’s monitoring settings too. |
When recording, I want to hear my voice at the right level alongside the backing track, and make sure the connector and signal path work with my device. That’s why around 29% of consumers prioritise connection and monitoring. |
| Portability and fit |
Check the folded size, cable routing and padding. Try them on with your usual glasses or headwear, too. |
If I often pack my headphones away or wear them for long periods, they need to be both compact and comfortable for me. Around 21% of consumers prioritise portability and comfort. |
| Listening at safer levels |
Start at a low volume and take regular breaks. The WHO gives 80 dB for up to 40 hours per week as a guideline, not as a measurement for any particular pair of headphones (6 March 2026). |
When I practise around background noise, I don’t want to keep turning the volume up, so I pay attention to volume and listening time. Around 14% of consumers put hearing-friendly listening first. |
Common misconceptions
-
Choosing an open-back model just for its spacious sound
Background noise can make it harder to hear. And if you’re recording with a microphone, backing tracks from your headphones may end up on the recording.
Choose a design to suit your listening environment and recording needs, not just because it’s labelled “studio”.
-
Expecting the headphones alone to provide latency-free monitoring
Latency can be introduced in the signal path by your recording software. If direct and software monitoring are both switched on, you may hear your voice twice.
Check the monitoring function on your existing device and its headphone connection before choosing a model.
-
Assuming the manufacturer’s isolation figures will match the fit on your head
The actual fit affects passive isolation, while a tight clamping force can also affect comfort.
Check the seal and clamping force at your usual listening volume, including with glasses on, and check whether replacement ear pads are available for the exact model variant.
Brands and model ranges to consider
beyerdynamic
The closed-back DT 770 PRO X is designed for recording and monitoring, and has a detachable cable. It’s a different version from the DT 770 PRO with 80 Ohm impedance.
- beyerdynamic Germany lists the DT 770 PRO X at 48 Ohm and 305 g without the cable.
- Its stated nominal headband pressure is 5.5 N. This figure doesn’t tell you how comfortable the headphones will feel on your head or whether your playback device can drive them to a sufficient volume.
Sennheiser
The closed-back HD 280 PRO is a foldable option for recording and monitoring. Sennheiser says it comes with a 3.5 mm plug and a 6.3 mm adapter.
- Sennheiser lists replaceable ear pads and up to 32 dB of ambient noise attenuation.
- “Up to” isn’t a guaranteed figure for every fit, so check how they feel during your practice session.
Audio-Technica
The closed-back, foldable ATH-M50x has a detachable cable, making it a potential option if portability is a priority.
- Audio-Technica lists the detachable cable as a feature of the ATH-M50x.
- In its review dated 31 January 2026, HIFI.DE criticised the pronounced bass emphasis and high clamping force. Try the sound for monitoring your vocals and check the fit for yourself during longer practice sessions.
Shure
Shure says the closed-back SRH440A is designed for studio and home recording, and is available with a detachable cable.
- Shure lists a 6.3 mm adapter as included.
- The manufacturer’s figures for ambient noise attenuation and comfort are no substitute for trying the fit during your own practice session.
AKG
The closed-back, foldable K371 is an alternative if saving packing space is important.
- AKG lists the K371 at 32 Ohm and 255 g on its US product page.
- These model specifications don’t tell you anything about prices, delivery terms or warranties in Germany.
Suitable products on Joybuy
Suitable products coming soon.
Frequently asked questions
Do I need an audio interface to practise with headphones?
Not just because you’re using headphones. What matters is whether your existing device routes the backing track and, if needed, a microphone signal to a suitable headphone output as required. If you’re recording with a suitable interface, its direct monitoring can play your voice back with virtually no delay.
Why can I hear my voice twice when I’m recording?
If direct and software monitoring are both switched on, you may hear an immediate signal alongside a delayed one. Check your interface settings and switch off the monitoring path you don’t need.
How should I care for my headphones after lots of camping practice sessions?
Check the ear pads for flattening and the cable for kinks. For the classic DT 770 PRO models, beyerdynamic explains how to replace wear parts; availability depends on the exact model.