Who is a capture card for?

Console speedrunners with a gaming monitor

If you want to see the console’s picture directly on your screen while you play and record at the same time, check that the HDMI passthrough supports your preferred display mode. Elgato and AVerMedia are among the manufacturers that provide technical details on this.

Streamers with limited desk space

When space is tight, your capture card, recording computer, screen and cables all need to fit together. An external box and an internal desktop card take up space in different ways; AVerMedia specifies a PCIe x4 Gen 2 connection for the GC573.

Speedrunners with commentary and a timer

If you’re combining gameplay with commentary or other OBS sources, set up the video and audio paths together and test them before your presentation. The OBS Project guide treats video capture devices and audio sources as separate sources.

What should you look for?

For a time-sensitive console run, start by deciding how the signal will reach your gaming screen. Then check that the space you have, the recording format and the connections all suit your setup.

Priority What to check before buying Who it matters most to
Gaming screen without relying on the recording preview Check that the HDMI input and output, plus the supported passthrough resolution and frame rate, match your screen. If I’m playing a time-sensitive run on a separate screen, I don’t want to depend on the recording preview. Around 36% of consumers place the most importance on this direct signal path.
Space and cable routing Check the form factor, port locations and cable routing. For an internal card, also make sure you have a suitable free PCIe slot. On a small desk, the card, computer, monitor and cables all need to fit. Around 29% of consumers make desk space their top buying priority.
Recording picture and commentary Check the recording mode separately from passthrough and test your preferred mode in the software you’ll use. In OBS, listen back to a test of the game audio and microphone. If I want to present a run with commentary, the picture and audio need to work together in my setup. Around 21% of consumers prioritise recording and commentary above all else.
Connection to your existing computer Check the required USB port or PCIe slot, operating system and recording software requirements for the exact model. I want to use the card with my existing recording computer and software, without overlooking a required connection. Around 14% of consumers put computer compatibility first.

Common mistakes when choosing a capture card

  • Assuming “4K” means the same thing for recording and monitor output

    For the Elgato HD60 X, the manufacturer specifies passthrough up to 2160p60, but recording up to 2160p30. According to the manufacturer, the AVerMedia GC311 supports neither 4K nor HDR.

    Make a note of your preferred gaming screen mode and recording format separately, then check both against the specifications for the exact model.

  • Assuming an advertised top frame rate works with any software

    AVerMedia’s 4K144 recording specification for the GC553G2 requires Streaming Center on Windows and the MJPEG format.

    Test your preferred recording mode with the exact software and operating system you plan to use for your presentation.

  • Testing the picture but not the audio path

    The OBS Project guide treats video capture devices and audio sources separately; adding the same audio source twice can cause an echo.

    Test the gameplay, game audio and commentary together before presenting your speedrun.

Key brands at a glance

Elgato

External HDMI models for recording console gameplay, with passthrough and recording formats to check separately.

  • Elgato specifies recording up to 2160p60 and HDMI passthrough up to 2160p60 for the 4K S. For the HD60 X, it specifies recording up to 2160p30 and passthrough up to 2160p60.
  • The 4K S needs a suitable USB 3.0 Type-C port. Elgato says system requirements may differ when using software other than its own.

AVerMedia

The GC311, GC553G2 and GC573 offer different external and internal connection options.

  • According to AVerMedia, the GC311 supports recording and passthrough up to 1080p60. The GC573 is an internal card with a PCIe x4 Gen 2 interface.
  • According to the manufacturer, the GC311 supports neither 4K nor HDR. The GC553G2’s stated 4K144 recording requires Streaming Center on Windows and MJPEG; with the GC573, check the slot and any potential bandwidth sharing.

NZXT

The Signal HD60 is an external HDMI option for console and dual-PC setups.

  • NZXT’s manual describes an optional HDMI output for connecting to your gaming monitor.
  • NZXT specifies a compatible USB 3.2 Gen 1 port for the recording computer. Check that your computer has one available.

Matching products at Joybuy

Related products coming soon.

Frequently asked questions

Should I play using the OBS preview?

If you have a separate HDMI console and gaming monitor, check that the card’s HDMI output supports the display mode you want to use. The OBS Project guide notes that buffering on a capture source can delay playback; a manufacturer’s passthrough specification doesn’t tell you the measured delay across your entire signal chain.

How do I set up gameplay and commentary in OBS?

Add the capture card as a video capture device and select a resolution and frame rate supported by the exact model. Set up your microphone as an audio source, then make a test recording to check that you can hear both the game audio and your commentary, with no noticeable echo or sync issues.

What happens if a product is faulty, or if it comes with an extra manufacturer’s guarantee?

For consumer purchases in Germany, you generally have statutory rights against the seller for two years from the date you receive the goods. The Verbraucherzentrale distinguishes these rights from a voluntary manufacturer’s guarantee, which does not replace them.