Who is this solution for?

People transferring tapes quietly at a shared desk

If you want to monitor the tape through headphones rather than speakers, check that the headphone socket is suitable and that monitoring volume is controlled separately from the recording level. Behringer’s specifications and the Sonoma County Library guide explain this distinction.

Stereo cassette deck owners

To record both channels, the deck’s outputs need to match two interface inputs or a designated stereo line input. The Audacity Manual and the product specifications from Behringer and Focusrite describe the relevant connection options.

People who like to set their levels carefully

If you want to check the recording level before a longer transfer and adjust it on the interface if needed, check the level controls on the specific model. Behringer and Arturia describe different controls on their devices.

What should you look for when buying?

First, compare your cassette deck’s stereo outputs with the interface inputs. Then check the headphone socket and monitoring options, and whether you can adjust the recording level on the device.

What matters What to check when buying Who is it important to?
Headphone monitoring Check that the headphone socket and plug are compatible; find out whether you’ll hear the input signal directly or playback from the computer. If you’d rather not use speakers at a shared desk, you’ll want to listen to the tape through headphones and control the monitoring volume separately from the recording level. Around 29% of consumers prioritise quiet headphone monitoring.
Stereo connection Match the deck’s two outputs to two suitable interface inputs; if you’re connecting RCA to jack, allow for two suitable cables. If you want to record both channels from your stereo deck, the left and right outputs each need to connect to a suitable input. Around 29% of consumers prioritise having the right stereo line connection.
Recording level Make a test recording of a loud passage and check the recording meter; see whether the interface has an input gain control. If you want to avoid having to redo long recordings because of clipping, you’ll want to check the recording level beforehand and adjust it if needed. Around 24% of consumers prioritise level control and protection against clipping.
Computer connection Check the USB connection, whether any hub needs its own power supply, and that the software is set to use the correct recording device. If you need to set up the interface on a shared computer, you’ll want to make sure the connection and recording device work with your software. Around 18% of consumers focus primarily on how it fits into their workspace.

Common mistakes to avoid

  • Confusing headphone volume with recording level

    The volume you hear in your headphones doesn’t automatically tell you what level the software is recording at. If the recording clips, you may have to run the cassette through again.

    Before making a longer recording, play a loud passage, record a short test and check the recording meter.

  • Choosing the wrong cables for the two line inputs

    Depending on the interface, a deck with RCA outputs won’t necessarily have the right connections for both recording channels.

    Check the sockets on your deck against the inputs on the specific model, and make sure you know which cables and headphone adapter will work with your setup.

    You may need two suitable cables or a headphone adapter to make the connections.

  • Using direct and software monitoring at the same time

    If both monitoring paths are active, you may hear an echo.

    Choose one monitoring path while recording, then play back the recording separately. For the MiniFuse 2, Arturia recommends muting software monitoring on the recording track in this situation.

Relevant brands to consider

Behringer

The UCA202 and UCA222 are connection options for cassette decks with stereo RCA line outputs and headphone monitoring.

  • According to the manufacturer, both models have RCA inputs, USB power, a 3.5 mm headphone socket and direct input monitoring, with 16-bit conversion.
  • The controls described include a headphone level control, but no separately specified input gain control. So the headphone volume can’t replace checking the recording level.

Focusrite

The Scarlett 2i2 4th Gen is a two-channel option with two jack line inputs.

  • The official 4th-generation specifications list two 6.35 mm line sockets, 24-bit conversion and a dedicated headphone level control.
  • If your cassette deck has RCA outputs, you’ll need suitable cables to connect them to the two jack inputs. These specifications apply to the 4th generation, not every Scarlett model.

Arturia

The MiniFuse 2 is worth considering if you want to control the input level and balance the direct signal against computer playback.

  • According to Arturia, the model has two combination inputs, a headphone socket, a gain control and a monitor mix control.
  • Arturia notes that passive USB hubs may not supply enough power. Using direct and software monitoring at the same time can also cause an echo.

Tascam

The US-2x2HR is a two-channel option with switchable Mic/Line/Instrument inputs.

  • The manufacturer’s specifications list two analogue combination inputs, as well as separate controls for the line and headphone outputs.
  • Extra recording features aren’t necessarily an advantage if you only want to transfer a cassette. Check that the connections and controls suit your particular setup.

Joybuy products

Similar products coming soon.

Frequently asked questions

Are one line input and a headphone socket enough?

For a stereo deck, you need a suitable recording path for both channels. Compare the deck’s sockets with two interface inputs or a designated stereo line input; a computer microphone input isn’t a substitute.

Why can I hear an echo while recording?

If direct and software monitoring are both active, you may hear two signal paths. For the MiniFuse 2, Arturia recommends muting software monitoring on the recording track.

How do I check the level before recording a whole side of a cassette?

Make a test recording of a loud passage and check the recording meter and waveform for clipping. The Audacity Manual recommends aiming for peaks of around −6 dB in a test recording. This is a software recommendation, not a required setting for every device.

Which cables or adapters should I check before buying?

Compare your cassette deck’s outputs with the interface inputs, and check your headphone plug. If you have RCA outputs and two jack line inputs, you may need two suitable cables; depending on your headphones, you may also need an adapter.