Who would benefit from an audio interface?

Preserving stereo when archiving

If you want to record the two outputs from your cassette deck separately and check the left and right channels through headphones, look for two line inputs and stereo direct monitoring. The Audacity manual recommends selecting “2 (Stereo)” for a stereo recording.

Quiet monitoring in a small room

If you don’t want to use speakers while transferring your tape, a headphone output and a suitable monitoring setup are important. Focusrite documents switchable stereo direct monitoring on the 4th Generation Scarlett 2i2.

Occasional tape transfers

If you only digitise cassette tapes now and then, first check whether your computer already has a suitable stereo line input, or whether a USB cassette player can do the job. The Audacity manual describes USB cassette players as one way to transfer tapes to a computer.

What should you look for when buying?

Buying consideration What to look for Who it matters most to
Stereo recording and channel assignment Check for two line inputs that can be used simultaneously and stereo direct monitoring. Set the recording software to use two channels as stereo too; the Audacity manual recommends selecting “2 (Stereo)”. If I want to record both channels from my cassette deck separately and check the left and right through headphones, keeping the channels separate comes first. Around 36% of consumers put preserving the stereo signal top of their list.
Quiet monitoring Check for a headphone output, volume control and the actual direct-monitoring mode. Monitoring the signal directly and through the software at the same time can cause an echo. If I’m recording in a small or shared room, I want to hear the signal through headphones without switching on speakers. Around 29% of consumers prioritise quiet monitoring.
Keeping extra effort to a minimum Check the connections and recording equipment you already have. A microphone input is not automatically a suitable substitute for a stereo line input. If I only transfer tapes occasionally, I want to use the equipment I already have before buying another interface. Around 21% of consumers prioritise keeping extra effort to a minimum.
Compatible connections Compare the sockets on your deck and interface, along with the cables and headphone adapters you’ll need. With separate stereo outputs, each channel needs its own signal path. If I want to connect my deck, computer and headphones, the connections need to match without any unexpected workarounds. Around 14% of consumers prioritise making sure their devices can connect properly.

Common connection mistakes

  • Assuming two inputs mean stereo direct monitoring

    Two separate inputs let you record both channels from your deck, but that doesn’t automatically mean the headphone mix will play them back directly in stereo.

    If you want to hear the left and right channels as you record, check the monitoring setup for the exact model and its channel assignment in the manual.

  • Connecting the deck’s line output to a microphone input

    A line-level signal may be amplified too much by a microphone input, causing it to clip.

    Where possible, use the line or tape output on your cassette deck and connect it to a suitable stereo line input or to two line inputs on your interface.

  • Leaving cables and connection options until after you buy

    A stereo deck with separate outputs needs two signal paths to the mono inputs on an interface. Cables or headphone adapters you already own won’t necessarily fit the sockets.

    Before ordering, compare the connections on your deck, interface, computer and headphones, and first check whether your existing equipment is enough.

A guide to the brands

Focusrite

The 4th Generation Scarlett 2i2 has two line inputs and switchable stereo direct monitoring.

  • Focusrite describes two separate jack line inputs, with a choice of mono or stereo direct monitoring.
  • The model’s manual applies to this generation; check the features of other Scarlett models or generations separately.

Behringer

The U-Phoria UMC204HD has two line inputs and a switchable stereo or mono monitoring path.

  • Behringer also lists an input/playback mix control and a headphone level control.
  • For a straightforward cassette transfer, extra MIDI, insert and playback connections aren’t essential.

Audient

On the EVO 4, you can adjust the gain of two inputs together for a stereo recording.

  • Audient also notes that connecting headphones automatically mutes the monitor outputs.
  • Linked input controls don’t tell you how direct monitoring is distributed between the left and right channels; check this before you buy.

PreSonus

The Studio 24c is an interface with two line inputs, a headphone output and a control for direct input monitoring.

  • PreSonus describes two microphone, instrument or line inputs, as well as a monitor mix control.
  • If you need direct stereo monitoring, check the specific left-right channel assignment before buying.

Arturia

The MiniFuse 2 lets you balance the direct input signal against computer playback using a monitor mix control.

  • Arturia describes direct monitoring through the interface.
  • If you hear the input signal directly and through the software at the same time, you may get an echo. Also check that the direct left-right signal routing suits your deck.

Joybuy products

Related products coming soon.

Frequently asked questions

Can I connect my cassette deck directly to my computer’s microphone input?

A microphone input isn’t a substitute for a suitable line input, as the stronger line-level signal from your deck may clip. If your computer has a separate stereo line input, you can use that; otherwise, look for an interface with line inputs. The Audacity manual explains suitable connection options.

How can I check the recording before transferring a whole cassette?

Set up two stereo recording channels, test a loud passage and check both levels for clipping. The Audacity manual suggests peaks of around −6 dB as a guide for recording level.

Why do I hear an echo when monitoring directly?

An echo can occur if you hear the direct input signal at the same time as its delayed output from the software. For this situation, Arturia recommends muting software monitoring for the relevant track while recording.

What should I bear in mind with used cassette tapes and playback equipment?

Check the condition of your playback equipment before making important transfers. The Audacity manual points out that residue on the tape head can affect high-frequency playback and increase noise; an audio interface won’t fix playback problems like these.

Can I digitise a copyrighted music cassette for my own use?

Under the conditions set out in § 53(1) UrhG, natural persons may make individual copies for private use, provided they are not used directly or indirectly for commercial purposes. This does not apply, among other things, to source material that was obviously produced or made publicly available unlawfully. This does not amount to blanket permission to publish or share the file.