When digitising cassettes in a shared office, your interface should capture both channels from the deck and let you monitor through headphones. If your deck has RCA line outputs, an interface with RCA inputs, such as the Behringer UCA222, can make connecting it easier. Two line inputs offer other ways to control levels, but you’ll need the right cables. If available, Audacity recommends using the deck’s Line, Tape or Record output. Check the recording you’ve saved, too: listening as you record doesn’t confirm that the file is error-free.
Which interface is right for you?
For digitising stereo cassettes
If you want to record both channels of a cassette and monitor them while transferring it, first check your deck’s connections and whether the interface supports stereo monitoring. If available, the Audacity manual recommends using a Line, Tape or Record output.
For listening quietly at a shared desk
If you want to listen through headphones rather than office speakers, look for an easily accessible headphone control and check how the interface switches between its input and computer playback. Audient says the EVO 4 automatically mutes the monitor outputs when you plug in headphones.
For managing levels across multiple tapes
If you need to reset the recording level for different cassettes, level meters and clip indicators can help you keep an eye on things. Audacity notes that dropouts can go unnoticed during recording and only become apparent when you play back the saved file.
What should you look for when buying?
For a stereo transfer, both channels from the cassette deck need to reach suitable inputs. If available, the Audacity manual recommends using a Line, Tape or Record output.
| Consideration |
What to check before buying |
Who is it important to? |
| Stereo signal path and connections |
Check the deck’s outputs, that there are two suitable inputs, and that stereo recording is enabled. |
When I transfer a cassette deck’s output in stereo, both channels need to reach the interface correctly. Around 36% of consumers prioritise a suitable stereo signal path. |
| Uninterrupted headphone monitoring |
Check the headphone socket, level control and monitor switching, as well as what happens to connected speakers. |
At a shared desk, I want to listen through headphones without switching on the office speakers. Around 29% of consumers prioritise quiet listening. |
| Recording levels and checking the file |
Check the input level or attenuation, clip indicators and the level of the saved stereo recording. |
When digitising several cassettes, I want to set the level for each tape and check the saved file for errors. Around 21% of consumers prioritise reliable levels and file checks. |
| A simple desk setup |
Check the computer connection, any drivers you’ll need and the cables required. |
When I’m sharing a workspace, I want to set everything up using just a few suitable connections. Around 14% of consumers prioritise a straightforward setup. |
Common buying mistakes
-
Assuming RCA sockets are inputs
RCA connections can be inputs or outputs. On the MOTU M2, the RCA sockets are outputs; the Behringer UCA222, on the other hand, has RCA inputs for connecting a cassette deck.
Check the specifications to confirm whether they’re Line In or Line Out.
Depending on the connections on your deck and interface, you may need suitable cables or a different interface.
-
Assuming two inputs mean stereo direct monitoring
The generation of the Focusrite Scarlett 2i2 matters: Focusrite confirms stereo direct monitoring for the 3rd and 4th Gen. For older generations, check the monitor routing on the specific model.
Check the exact model generation and whether direct monitoring plays back both channels as you want it to.
-
Assuming the input signal confirms the recording is OK
According to Audacity, dropouts may go unnoticed while monitoring during recording and only become apparent on playback.
After the transfer, listen back to the saved recording and check both channels.
If you only spot a recording error afterwards, you may need to transfer the cassette again.
-
Relying on a trial as a permanent software licence
PreSonus’s EU product page describes the software use listed with the Studio 24c as a six-month trial.
Check the licence period and the software features you need separately from the interface specifications.
You may have to pay for the software later if you want to keep using it.
Key brands at a glance
Behringer
The UCA222 offers a compact stereo signal path with RCA inputs. The UMC202HD and UMC204HD each have two inputs; check the Line and Instrument functions on the specific model.
- According to Behringer, the UCA222 lets you switch between the signal at the RCA inputs and computer playback. Its headphone output has a dedicated volume control.
- Behringer specifies 16-bit recording formats for the UCA222. The UMC204HD’s Mono/Stereo switch and Mix control aren’t automatically available on the UMC202HD.
Focusrite
The Scarlett 2i2 has two inputs and direct monitoring. For cassette transfers, the exact generation matters.
- Focusrite confirms stereo direct monitoring for the Scarlett 2i2 3rd Gen and 4th Gen.
- For older 2i2 generations, check the monitor routing on the specific model rather than assuming it supports stereo monitoring.
MOTU
The M2 has two mic/line/instrument inputs, level meters on the unit and a headphone control.
- MOTU specifies direct mono or stereo monitoring, as well as input and output meters.
- According to MOTU, the M2’s RCA sockets are mirrored outputs, not inputs for a cassette deck.
Audient
The EVO 4 has two inputs and suits a workspace where you alternate between headphones and speakers.
- Audient describes the two inputs as linking in stereo, and says the monitor outputs are automatically muted when you plug in headphones.
- Automatic muting doesn’t provide a second, independently routed monitoring mix.
PreSonus
The Studio 24c has two mic/instrument/line inputs, an input level meter and a control for balancing the input signal with computer playback.
- The PreSonus EU product page lists the Mix control as enabling direct monitoring with low latency.
- The page describes the included software use as a six-month trial; it doesn’t confirm that the direct input signal is routed in stereo.
Audio interfaces at Joybuy
Suitable products will be available soon.
Frequently asked questions
Should I connect the cassette deck’s line output or headphone output?
If available, the Audacity manual says you should normally use the Line, Tape or Record output. Check that it’s compatible with the interface’s line input and that it captures both stereo channels.
Is direct monitoring enough to check the finished transfer?
No. Direct monitoring sends the input signal straight to your headphones. Audacity notes that recording dropouts can go unnoticed while you’re monitoring, so play back the saved file afterwards to check it.
What should I check about software and potential ongoing costs?
Check compatibility with your computer, the cables you’ll need and the terms for any included software. PreSonus describes the Fender Studio Pro access listed with the Studio 24c as a six-month trial. The Verbraucherzentrale notes that statutory consumer rights and a voluntary guarantee offer different forms of protection.
Can I digitise a copyright-protected cassette for personal use in Germany?
Section 53(1) of the German Copyright Act (UrhG) allows individuals to make individual copies for private use under the conditions set out there. These include making no direct or indirect commercial gain and not copying from a source that is obviously unlawful. Under Section 53(6), such copies must not be distributed or used for public performances. Whether a particular use in an office is still private depends on its purpose and who has access to it.
Where should you dispose of an old audio interface in Germany?
According to the German Environment Agency, waste electrical equipment must not go in household rubbish. Check the acceptance conditions at your local collection point or take-back scheme.