Which setup is right for you?

Stereo archivists

If you want to preserve both channels of a cassette and monitor the left and right channels through headphones while transferring it, check the channel routing and stereo mode of the direct monitoring. The Focusrite User Guides describe this feature for the Scarlett 2i2 4th Gen.

Anyone keeping an eye on levels

For tapes recorded at different volumes or longer recordings, adjustable input levels and a test run can help before you record the whole cassette. The Audacity manual explains how to monitor recording levels.

Computer line-input users

If you want to keep extra hardware to a minimum, first check whether your computer has a suitable stereo line input. The Audacity manual explains how this differs from a microphone input.

What should you look for when buying?

First, check that you can record both cassette deck channels separately. Then consider how you want to monitor, how you’ll control levels and which connections your computer already has.

What matters What to check before buying Who is this important to?
Stereo wiring and channel separation Check the deck outputs, two separate line inputs, suitable cables and the stereo setting in your recording software. If I want to preserve both sides of a cassette separately, I look for two correctly assigned recording channels. Around 36% of consumers put stereo recording first.
Monitoring while recording Check for a headphone socket, volume control and left-right playback during direct monitoring. If I want to monitor the transfer through headphones, it’s important that the left and right channels come through as expected. Around 29% of consumers prioritise monitoring as they record.
Level control and avoiding clipping Check the input controls and indicators on the device, as well as the peak levels in the software during a test run. The Audacity manual suggests around −6 dB as a guide for the maximum recording peak. When tapes have different recording levels, I want to check louder sections before recording the whole tape. Around 21% of consumers focus above all on recording levels.
Extra hardware and connection requirements Before buying, check whether your computer really has a suitable stereo line input. A microphone input is not the same thing. If I want to use the connections I already have, I first check that they support stereo line recording and the monitoring route I need. Around 14% of consumers prioritise avoiding extra hardware.

Avoid common connection mistakes

  • Connecting a stereo plug to just one mono input

    On the Scarlett 2i2 4th Gen, each of the two jack sockets is a mono input, as explained in the Focusrite User Guides. One input therefore won’t automatically record both deck channels separately.

    Connect the deck’s left and right outputs to separate inputs, then check the routing with a short stereo test recording.

  • Assuming direct monitoring means stereo direct monitoring

    A direct monitoring switch on its own doesn’t tell you how the two inputs are routed to the left and right sides of your headphones.

    Check the manual for the specific model to see how it routes left and right. The Focusrite User Guides describe a switchable stereo mode for the Scarlett 2i2 4th Gen.

  • Using your computer’s microphone input as a line input

    A microphone input is not the same as a line input. The Audacity manual advises against connecting a line-level signal to a microphone socket in the usual way.

    Check the actual input type on your computer rather than relying on the shape of the connector alone.

Brands to consider

Focusrite

The Scarlett 2i2 4th Gen is worth considering for stereo transfers if you need two line inputs and an explicitly selectable stereo direct monitoring mode. The Focusrite User Guides describe these features for this model.

  • Each of the two mono jack inputs can take one deck channel. For line-level signals, make sure Instrument mode is switched off.
  • For a stereo deck, you’ll need to use both inputs and have suitable cables, rather than connecting to just one input.

MOTU

The M2 is an option if you’re looking for two combo mic/line/instrument inputs and easy-to-read level meters. MOTU lists meters for the inputs and outputs, as well as a headphone output.

  • The level meters can be useful for checking inputs as you set your recording levels.
  • Meters alone are no substitute for a test run or listening back to the recording. Also check that the system requirements are compatible with your computer.

Behringer

The UMC202HD is an option if you’re looking for two switchable line/instrument inputs, direct monitoring and a pad switch. Behringer lists these features for this model.

  • The pad switch may be a useful feature if your input source is too loud.
  • If you want to hear the channels directly through the left and right sides of your headphones, check the routing for this specific model before buying.

PreSonus

According to PreSonus, the Studio 24c has two mic/instrument/line inputs, a headphone output and a mix control for balancing the input against computer playback.

  • Input LEDs and the mix control are useful features if you want to manage recording levels and your monitoring mix on the device.
  • Check that the direct monitoring route gives you the left-right playback you want.

Arturia

The MiniFuse 2 is a two-input option with line/instrument switching. Arturia describes direct monitoring via the Monitor Mix control.

  • The Monitor Mix control is useful if you want to monitor the input signal directly through the outputs.
  • For your setup, check how the model sends the two input channels to the left and right during direct monitoring.

Audio interfaces at Joybuy

Related products coming soon.

Frequently asked questions

How do I connect a cassette deck for stereo recording?

Connect the deck’s left and right line or tape outputs to separate line inputs. Select two stereo recording channels in your recording software, then check the routing with a short test recording.

Can I use my computer’s line input instead of an audio interface?

Yes, if your computer really has a suitable stereo line input and the connection supports the monitoring route you want. The Audacity manual distinguishes line inputs from microphone inputs and advises against connecting a line-level signal to a microphone socket in the usual way.

How can I avoid an echo when monitoring during recording?

Use either the direct input signal or the delayed signal from your recording software. If you’re using direct monitoring, switch off the track’s additional software monitoring.

What recording level should I test before recording a whole cassette?

Start by recording a louder section and check both channels. The Audacity manual suggests aiming for a maximum peak of around −6 dB on the recording meter, leaving some headroom to avoid clipping.

Can I digitise a music cassette I’ve bought for my own use in Germany?

Under the conditions set out in § 53 Abs. 1 UrhG, a natural person may make individual copies for private use, provided they are not made for commercial purposes, whether directly or indirectly. This does not include, among other things, copies made from sources that are obviously illegal or have been made publicly available unlawfully. This does not amount to blanket permission to publish the recording or make transfers commercially. The wording of the law on Gesetze im Internet is authoritative.