Who is this guide for?

Archiving stereo cassette tapes

If your cassette deck has separate left and right outputs, you’ll want to capture and monitor both channels when transferring your tapes. The Audacity Manual and product information from Focusrite and Arturia cover the relevant connection and monitoring considerations.

Monitoring as you record

You want to listen through headphones while keeping an eye on the recording on your computer, without relying on software monitoring that may introduce a delay. The Audacity Manual explains the potential latency, while Focusrite documents direct monitoring on the 4th Generation Scarlett 2i2.

Transferring tapes with the equipment you already have

Before buying an interface, you’ll want to check whether your computer already has a suitable stereo line input or whether a USB cassette player will do the job. The Audacity Manual describes both transfer methods.

What should you look for when buying?

First check whether an existing stereo line input or a USB cassette player meets your needs. If you do need an interface, choose one based on your deck’s connections and how you want to monitor the sound.

The table matches each preference with the main consideration when choosing an interface.

Priority What to check when buying Who is it important for?
Stereo signal path The deck’s line outputs and suitable cables for connecting to two inputs; stereo channel assignment in the recording software. If my deck has separate left and right line outputs, I want to record both channels correctly. Around 36% of consumers prioritise the stereo signal path.
Monitoring while recording A headphone socket, direct monitoring and stereo/mono mode; and, if needed, the ability to mix with computer playback. While transferring a tape, I want to hear the sound through headphones without relying on software monitoring. Around 29% of consumers prioritise monitoring.
Level monitoring Input levels and a clip indicator; make a short test recording of a loud passage before transferring the whole tape. When recording a whole cassette, I want to spot levels that are too high early on. Around 21% of consumers prioritise level monitoring.
Keeping extra setup to a minimum The connections already available on your computer and the features of any USB cassette player you may already own. Before buying extra equipment, I want to know whether what I already have will do the job. Around 14% of consumers prioritise keeping additional setup to a minimum.

Mistakes to avoid

  • Assuming two recording inputs mean stereo direct monitoring

    Recording and direct monitoring are separate functions. Arturia and Focusrite explicitly describe stereo/mono settings for direct monitoring on the respective models.

    Check how the two inputs are routed to the headphones on the specific interface and whether you can select the stereo mode you want.

  • Connecting your cassette deck’s line output to a microphone input

    The Audacity Manual warns that a microphone input can amplify a stronger line-level signal too much.

    Use a suitable line input, and check which sockets and cables are compatible with your cassette deck before buying.

  • Buying an interface before checking your existing recording setup

    A suitable stereo line input on your computer or a USB cassette player may already be enough to transfer your tapes, as described in the Audacity Manual.

    First check which connections you already have and whether their recording and monitoring features are suitable for your needs.

Key brands at a glance

Arturia

The MiniFuse 2 may be worth considering if you want to compare two-input interfaces with a documented stereo/mono option for direct monitoring.

  • Arturia says the MiniFuse 2 has a Direct Mono switch and a control for mixing the input and computer signals.
  • Having two computer monitors doesn’t mean you need two independently switchable pairs of speakers.

Focusrite

The 4th Generation Scarlett 2i2 is an option with two line inputs and configurable direct monitoring.

  • Focusrite’s manual describes switching between stereo and mono direct monitoring through Focusrite Control 2.
  • Both 6.35 mm inputs are mono, so a stereo source uses both. This information applies to the 4th Generation model.

Behringer

The UMC202HD may suit you if you need line/instrument switching and a pad switch for stronger sources.

  • Behringer lists two inputs, signal/clip LEDs and direct monitoring.
  • If you need to hear the inputs as left and right during direct monitoring, check the stereo routing for your setup before buying.

MOTU

The M2 is an option if you want to check input and output levels directly on the interface.

  • MOTU lists two mic/line inputs, switchable hardware monitoring and a display for input and output levels.
  • According to MOTU, the additional RCA outputs mirror the jack outputs and are not specified as an independent second playback mix.

Steinberg

The UR22C is a two-input option with documented line connections and DSP monitoring.

  • Steinberg’s UR22C manual describes two mic/line connections and monitoring through dspMixFx.
  • Don’t assume how stereo is routed during direct monitoring from the number of inputs alone; check the settings for your setup.

Audio interfaces at Joybuy

Suitable products coming soon.

Frequently asked questions about transferring cassette tapes

Do I need two audio outputs because I have two computer monitors?

No. Two monitors don’t automatically mean you need two audio outputs. What matters is how many speaker setups you actually want to connect and control separately. According to the manufacturer, the RCA outputs on the MOTU M2 mirror the jack outputs.

How do I connect a cassette deck and check my first recording?

First check whether the deck has separate left and right line outputs. For a stereo recording, connect these to two suitable line inputs. Check the channel assignment in your software, then make a short test recording and check the levels before transferring a whole cassette side. The Audacity Manual also recommends checking the condition of the tape heads when transferring tapes.

Why is there a delay when I monitor the sound?

Software monitoring can introduce audible latency, as explained in the Audacity Manual. If you use direct monitoring instead, check the mix with computer playback so you don’t hear the input signal through both routes at the same time.

What are my rights if an interface is faulty?

For a consumer purchase in Germany, statutory rights are separate from a voluntary guarantee. The Verbraucherzentrale generally gives a period of two years from delivery; the type of purchase and the specific circumstances determine what applies to an individual fault.

Can I digitise a music cassette for my own use?

Under the conditions set out in § 53 para. 1 UrhG, natural persons may make individual copies for private, non-commercial use. This provision does not apply generally to publishing copies or circumventing effective technological protection measures; § 95a UrhG and the information provided by the Federal Ministry of Justice and the Federal Office of Justice should also be taken into account.