Who transfers cassette tapes?

Stereo cassette archivists

You want to record both channels from a cassette deck and save them as files. The Audacity Manual and Focusrite describe connecting a stereo source through separate left and right inputs.

Quiet listeners

You work in a quiet room with headphones and want to distinguish between the input signal and computer playback while transferring tapes. Behringer and Focusrite document relevant monitoring features for their respective models.

Frequent tape transfer users

You’re digitising several tapes and want to check levels and spot possible clipping before making longer recordings. MOTU, Behringer and the Audacity Manual describe features and steps for checking levels.

What should you look for when buying?

First check the signal path and connections, then the headphone monitoring, followed by level control and any extra cabling you’ll need.

Buying priority What to check Who is this especially important for?
Stereo signal path Check the deck’s outputs, compatible left and right line inputs, and the recording software’s stereo setting. If my deck outputs left and right over RCA, I want to connect and record both channels correctly. Around 36% of consumers with this goal prioritise the stereo signal path.
Headphone monitoring Check for a headphone socket, volume control and the input or stereo monitoring setting documented for the specific model. If I’m transferring tapes in a quiet room without speakers, I want to be able to monitor the input signal through headphones. Around 29% of consumers put this monitoring option first.
Recording levels Check both channels with a short test recording and look out for clipping indicators. The Audacity Manual gives peaks of around −6 dB as a guideline. If I’m recording several tapes, I want to spot high levels before making a long recording. Around 21% of consumers prioritise level control.
Simple set-up Check the deck outputs, computer connection, headphone plug and cables you’ll need together. If I only transfer cassette tapes occasionally, I want to avoid unnecessary adaptors and features I won’t use. Around 14% of consumers pay particular attention to keeping connections and accessories to a minimum.

Common connection mistakes

  • Assuming two inputs automatically mean stereo monitoring

    Two inputs may let you record both channels, but that doesn’t automatically mean direct monitoring will play them separately through the left and right channels.

    Check the manual for the exact model to find out how to set up stereo direct monitoring, then test it with a short recording.

    Incorrect routing could mean you have to transfer the tape again or spend extra time setting things up.

  • Connecting the deck’s line output to a microphone input

    The Audacity Manual warns against feeding the stronger line-level signal from a cassette deck into a computer’s microphone input.

    Use a suitable line input and choose a cable that matches the connections on both devices.

  • Selecting PHONO for cassette tapes on the Behringer UFO202

    Behringer distinguishes between PHONO mode for turntables and LINE mode for other audio sources.

    Set the switch to LINE when using a cassette deck’s line output.

A guide to relevant brands

Behringer

The UCA222 and UFO202 models offer stereo RCA connections, while the UMC202HD is designed for a set-up with independently controlled inputs.

  • According to Behringer, the UCA222 is powered via USB and offers switchable headphone monitoring. The UFO202 can be switched between LINE and PHONO.
  • Behringer specifies 16-bit conversion for the UCA222, which has no individually adjustable input level. Direct monitoring is documented for the UMC202HD, but stereo left-right routing of the direct monitoring signal is not explicitly confirmed.

MOTU

The M2 has two combo mic, line and instrument inputs, as well as a headphone output.

  • MOTU documents level meters and a stereo setting for hardware monitoring.
  • If your cassette deck has RCA outputs, you’ll need suitable cables to connect it to the M2’s inputs.

Focusrite

The 4th Generation Scarlett 2i2 combines two line inputs with a headphone output and selectable mono or stereo direct monitoring.

  • Focusrite documents a stereo mode for direct monitoring.
  • For a stereo source, both front 6.35 mm inputs are used and instrument mode should be off. If your headphones have a 3.5 mm plug, you’ll need a suitable adaptor.

Steinberg

The UR22C is a two-channel alternative with mic and line inputs, plus DSP monitoring.

  • The Steinberg manual describes two inputs and DSP monitoring features.
  • Before buying, check how the monitoring mode you select routes the left and right signals for your specific stereo cassette transfer.

Suitable products on Joybuy

Related products coming soon.

Frequently asked questions

Can I use my computer’s microphone input instead of an interface?

For the stronger line-level signal from a cassette deck, the Audacity Manual advises against using a computer’s microphone input. Instead, check whether you have a separate line input or use a USB interface with a suitable line input.

How should I start a longer tape transfer?

Connect the deck’s suitable output and start with a short test recording. Check the stereo routing and levels. The Audacity Manual gives peaks of around −6 dB as a guideline and recommends saving a recording as a WAV or AIFF file before editing.

What should I check on older cassette tapes and the deck before recording?

The Audacity tutorial lists checking or cleaning the tape heads and checking the recording levels among its recommended steps. If you’re unsure, you could start with a less important tape; working on the tape itself isn’t a requirement when buying an interface.

Is a manufacturer’s guarantee the same as your statutory rights?

No. The Verbraucherzentrale distinguishes between your statutory rights against the seller and a voluntary guarantee from the manufacturer or retailer. Check separately who the seller is and what any guarantee on offer covers.

Can I digitise copyrighted cassette tapes for my own use?

Under certain conditions, § 53 para. 1 UrhG allows individuals to make individual copies for private use, provided they are not made directly or indirectly for commercial purposes and no obviously unlawful source is used. This is not blanket permission to copy every cassette or make any further use of a copy. The applicable law in Germany is what matters.