For a cassette deck with a stereo line output, you need two line inputs that can be used at the same time, plus a stereo recording setting. The Audacity manual recommends using the deck’s line, tape or record output. A USB-powered phono interface can make connecting everything simpler, while a two-channel interface with adjustable inputs gives you more control over levels, but requires the right cables and enough USB power.
Who is this setup for?
Stereo cassette deck owners
If your deck has a stereo line output, you’ll need separate inputs for the left and right channels, and you’ll need to select stereo in your recording software. The Audacity manual explains how to set this up for USB recordings.
Anyone transferring tapes with few spare sockets
If your computer and cassette deck are already using up sockets, an interface that the manufacturer says is USB-powered can save you from needing a separate power supply for the interface. The key question is whether the USB port you’re using can provide enough power.
Anyone who needs control over recording levels
If you want to check loud sections of a tape before making a longer recording, adjustable inputs or level meters on the interface can help you monitor the recording signal. The Audacity manual recommends avoiding clipping while recording.
What should you look for when buying?
First, check your deck’s outputs and how many inputs can be used at the same time. Then decide whether you’d prefer a straightforward phono connection or extra level controls.
| What you need |
What to check before buying |
Who is this important to? |
| Recording stereo channels |
Two line inputs that can be used at the same time, with phono or jack connections to match your deck’s outputs. Select two recording channels in your software, as described in the Audacity manual. |
If I want to record both channels from my stereo deck separately, I look for compatible connections and a stereo setting. Around 29% of consumers put recording both tape channels correctly at the top of their list. |
| No spare socket for another interface |
USB power as specified by the manufacturer, and sufficient power from the computer port you’re using; a passive hub may not be suitable. |
If I have few spare sockets, I’d rather not need to plan for an extra power supply for the interface. Around 29% of consumers prioritise USB power. |
| Listening through headphones as you record |
Check for a headphone output and direct monitoring. For stereo recordings, make sure a stereo monitoring mode is available. |
If I want to monitor the transfer without powered speakers, I need a suitable headphone monitoring option. Around 24% of consumers prioritise direct monitoring. |
| Avoiding clipping |
Check for adjustable input levels or level meters, and test loud sections of the tape before transferring the whole thing. |
If I want to check the input level during loud passages, I look for controls on the interface or a recording meter. Around 18% of consumers prioritise level control. |
Avoiding common buying pitfalls
-
Assuming visible sockets are extra inputs
On the MOTU M2, the phono sockets are outputs. And on the 4th-generation Focusrite Scarlett 2i2, the number of sockets doesn’t mean they can all be used as independent inputs at the same time.
Check the signal direction and the number of line inputs that can be used simultaneously in the spec sheet before choosing your cables.
-
Assuming every USB hub can supply enough power
A passive hub may not supply enough power. Focusrite says the 4th-generation Scarlett 2i2 needs an additional power supply if the computer can’t provide enough power.
Check the power requirements for the specific model and the computer port you plan to use before assuming you can do without an extra socket.
Depending on the host port, you may need to use a different USB port or provide extra power.
-
Confusing headphone volume with recording level
The headphone volume doesn’t determine the level of the recording. The Audacity manual recommends avoiding clipping while recording.
Test a loud section of the tape before transferring the whole thing, and keep an eye on the recording meter.
If the recording clips, you may need to transfer the tape again.
-
Assuming a separate headphone control gives you a separate monitor mix
According to Arturia, the headphone output on the Arturia MiniFuse 2 mirrors the monitor signal. The separate volume control doesn’t create an independent second mix.
If you want your headphones and speakers to play different signals, check the signal routing rather than just the number of controls.
Key brands at a glance
Behringer
The UCA222 and UMC202HD offer different ways to connect a cassette deck and monitor the recording as you go.
- Behringer says the UCA222 is USB-powered and has stereo phono inputs, plus switchable headphone monitoring of the input signal. It converts audio at 16-bit resolution.
- Behringer describes the UMC202HD as USB-powered, with two adjustable line/instrument inputs and direct monitoring.
- You may need suitable jack cables for the UMC202HD. Behringer also says a driver needs to be downloaded for Windows. These details apply to the models mentioned.
Focusrite
The 4th-generation Scarlett 2i2 has two line inputs and a selectable stereo mode for direct monitoring.
- Focusrite documents two jack line inputs and stereo direct monitoring for this model.
- It’s usually powered through the computer’s USB port. Focusrite says an additional power supply may be needed if the host can’t provide enough power; these details apply to the 4th generation.
Arturia
The MiniFuse 2 is a USB-powered, two-channel interface with a headphone output and a monitor mix control.
- Arturia describes direct monitoring and a separately adjustable headphone level.
- According to Arturia, the headphone output mirrors the monitor signal and doesn’t provide an independent second mix. A passive USB hub may not supply enough power.
MOTU
The MOTU M2 combines two mic/line combo inputs with hardware monitoring and input and output meters.
- MOTU lists input and output meters, as well as two mic/line combo inputs.
- The phono sockets are mirrored outputs, not inputs for a cassette deck. You’ll need suitable cables to connect your deck to the jack inputs.
Joybuy products
Related products coming soon.
Frequently asked questions
Can I use the cassette deck’s headphone output instead of its line output?
If your deck has a line, tape or record output, the Audacity manual usually recommends using that connection. A headphone output has an additional, adjustable amplifier stage, so take extra care when testing the recording level.
Why can I hear an echo when using direct monitoring?
An echo can occur if you hear both the direct input signal and its delayed return from the recording software at the same time. In this case, Arturia recommends turning off software monitoring for the recording track while you record.
How do I check a recording before transferring a whole side of a cassette?
Select the interface as your recording input, choose two recording channels for a stereo cassette, and test a loud section. Check the recording meter for clipping; the Audacity manual recommends avoiding clipping while recording.
Can I digitise copyrighted music cassettes for my own use?
Under certain conditions, § 53 Abs. 1 UrhG allows an individual to make single copies for private use, provided they are not for direct or indirect commercial purposes and are not made from a source that is clearly illegal or has been made publicly available unlawfully. The legal text on Gesetze im Internet also makes clear that such copies must generally not be distributed or used for public performances. The private-use exception is not blanket permission for other uses.