Who would benefit from an interface for cassette transfers?

Stereo transfer users

If you want to record and monitor both sides of a stereo cassette separately, you’ll need two suitable inputs and a stereo monitoring mode documented for the model in question. Focusrite describes these modes for the 3rd- and 4th-generation Scarlett 2i2; Audacity also recommends testing your recording.

Those checking recording levels

With longer cassettes or recordings that vary in volume, it’s helpful to check the recording level before transferring the whole tape. Audacity recommends making a test recording and checking for clipping; a level meter on the interface is no substitute for this check.

Standing desk users short on space

If you listen while standing, easily accessible headphone and monitor controls, along with well-planned cable routing, can make your setup easier to use. Arturia notes that having a dedicated headphone volume control on the MiniFuse 2 doesn’t automatically give you an independent headphone mix.

What should you look for when buying?

First, check that your cassette deck’s outputs are compatible with two line inputs that can be used at the same time. Then decide whether you want to monitor the signal directly on the interface or mainly in your recording software. Finally, check that the controls, sockets and cables will work with your standing desk setup.

What you need What to look for Who is this important for?
Recording the left and right channels Two suitable line inputs and the correct channel routing; check whether the specific model supports stereo direct monitoring. When I transfer a stereo cassette, I want to record both channels at once and monitor them separately as I listen. Around 36% of consumers prioritise stereo recording and monitoring.
Checking recording levels Check the input controls and level meter; make a test recording of a loud passage and check the file for clipping. With cassettes that vary in volume or run for longer, I want to check the levels before recording the whole tape. Around 29% of consumers say checking levels is their main concern.
Using the interface at a standing desk Check that the headphone socket and controls are easy to reach, and confirm how the signal is actually routed. When I listen while standing, I want the headphone volume and connections to be within easy reach. Around 21% of consumers prioritise ease of use at a standing desk.
Choosing the right connections and cables Check the cassette deck’s outputs, the cables to both inputs and the connection to your computer. Before buying, I want to know which cables will work with my deck and computer, so I don’t plan for unnecessary extra equipment. Around 14% of consumers are mainly concerned with getting the right connections without having to buy extra kit.

What mistakes should you avoid when transferring cassettes?

  • Assuming two inputs automatically mean you can monitor in stereo

    Monitoring features depend on the specific model and, in some cases, its generation. A mono monitoring mode doesn’t automatically make a recording mono, but it can make it harder to check the channels separately. Focusrite documents different direct-monitoring modes for certain Scarlett 2i2 generations.

    Check the manual for a stereo mode, and test the monitoring signal separately from the saved recording.

  • Connecting the deck’s line output to a microphone input

    A line-level signal can overload a microphone input and may damage the audio equipment. For this connection, Audacity recommends using a suitable stereo line input.

    Check that your cassette deck’s output is compatible with the interface’s line inputs, and confirm the plug type and number of channels. You may need suitable cables, depending on the sockets.

  • Assuming a level meter proves your recording is error-free

    The meter on an interface doesn’t, by itself, tell you whether the saved file is clipped or whether both channels have been recorded correctly. Audacity recommends making a test recording and checking for clipping.

    Record a loud passage before transferring the whole tape, then check the file.

  • Confusing a dedicated headphone control with an independent mix

    According to Arturia, the MiniFuse 2’s headphone output mirrors the monitor signal, even though its volume can be adjusted separately. The MOTU M2’s additional RCA outputs are also mirrored, according to the manufacturer.

    If you need different signals for your headphones and speakers, check the output routing on the specific model rather than just counting the sockets.

A look at the leading brands

Focusrite

The 3rd- and 4th-generation Scarlett 2i2 are two-input options if you want to use stereo direct monitoring on the interface.

  • Focusrite documents a stereo mode for direct monitoring on both of these generations.
  • Controls and monitoring modes vary by generation, so check the manual for the specific model.

MOTU

The M2 is worth considering if you want to see input and output levels directly on the interface.

  • MOTU lists two mic/line inputs and a display showing input and output levels.
  • According to MOTU, the additional RCA outputs are mirrored, so they don’t provide a separate second mix.

Arturia

The MiniFuse 2 has two analogue inputs and lets you adjust the balance between direct and computer monitoring.

  • Arturia describes a Direct Mono switch; with it off, the two inputs are sent left and right when monitoring directly.
  • According to Arturia, the headphone output mirrors the monitor signal. A separate volume control doesn’t create an independent mix.

Tascam

The US-2x2HR is a two-input option if you plan to use it for recording tasks beyond cassette transfers.

  • Tascam lists two switchable mic/line/instrument inputs as well as MIDI connections.
  • MIDI and loopback are extra features. If you’re only transferring cassettes, focus on the inputs you need and how you’ll connect everything.

Roland

The Rubix22 is another two-input option, with input sensitivity adjustable directly on the unit.

  • The Roland reference manual identifies the inputs as 1L and 2R and describes a level meter.
  • Input settings need to match the playback device you connect.

Recommended products on Joybuy

Recommended products will be available soon.

Frequently asked questions about cassette transfers

Do I need an audio interface to record a cassette on my computer?

No, not just because you’re recording a cassette. Audacity also describes connecting a cassette deck to a suitable stereo line input on your computer, and generally advises against using a microphone input. If you buy an interface, check that its inputs are compatible with your deck’s outputs.

How can I test the connection before transferring a whole cassette?

First, make a test recording of a loud passage. Check both channels and the file for clipping. Audacity recommends a test recording so you can check the levels and recording before transferring the whole tape.

What should I check about cables and the computer connection?

First, check which outputs your cassette deck has and which cables will connect them to the interface’s two line inputs. For the MiniFuse 2, Arturia notes that passive USB hubs may not provide enough power.

Is a guarantee the same as your statutory consumer rights?

No. Your statutory rights are set out in law and cover claims against the seller for faulty goods; a guarantee is an additional, voluntary promise. The Verbraucherzentrale recommends checking the specific guarantee terms.

Can I digitise a music cassette in Germany for personal use?

Under the conditions set out in § 53 para. 1 UrhG, an individual may make a limited number of copies for private use, provided they are not used directly or indirectly for commercial purposes. This rule does not apply, among other things, to a source that was obviously made or made publicly available unlawfully. Permission to make a private copy is not blanket permission to publish it or make transfers for commercial purposes.