Who records choir rehearsals?

Choir directors using a stereo pair

You want to capture the rehearsal as a single stereo image using two microphones, without needing extra, separate microphone tracks. DPA Microphones and Focusrite both describe recording with a microphone pair as a suitable use for this setup.

Recordists using spot microphones

You want to record individual voices or other sound sources separately, alongside the main pair. What matters here is the number of actual microphone preamps, as the specifications from Tascam, Steinberg and Audient show.

Choir members recording on their own

You’re setting up the microphones and levels yourself, and want to monitor the signal through headphones while recording. Focusrite describes Direct Monitoring as listening to the input signal without routing it through the recording software.

What should you look for?

Two microphone preamps

A good fit if: You’re recording exactly one stereo pair and don’t want to capture any other microphones separately at the same time.

The trade-off: You can’t connect a third microphone as a separate mic channel to an interface with only two microphone preamps.

Four microphone preamps

A good fit if: You want additional spot or solo microphones to record to their own tracks alongside the main pair.

The trade-off: More channels are no substitute for a rehearsal run-through or suitable microphone placement. With the Audient EVO 8, powering four phantom-powered microphones also depends on the USB-C host connection.

First, decide how many microphones need their own tracks at the same time. Then check the microphone types, power requirements and monitoring options.

What you need What to check before buying Who it matters most to
Stereo pair with no extra channels Check that two microphone inputs can be used at the same time and that the microphones have the power they need. On the 4th-generation Focusrite Scarlett 2i2, the 48 V switch affects both inputs. If you only want to record the main pair separately, an interface with two microphone preamps could be a good fit. Around 36% of consumers share this priority.
Additional microphones on separate tracks Count the microphone preamps, not the total number of analogue inputs. Tascam and Steinberg each specify four microphone preamps. If you need additional voices or sound sources to have their own tracks alongside the stereo pair, extra microphone preamps are essential. Around 29% of consumers make this their main consideration.
Microphone and room setup Position the main pair in the room beforehand and listen for ventilation or other distracting noise. DPA Microphones and Shure treat microphone placement and background noise as separate factors in choir recording. If you first need to assess how balanced the main pair sounds in a small room, a test run can help you decide how many channels you need. Around 21% of consumers have this in mind.
Monitoring and computer connection Check the headphone socket, Direct Monitoring and host connection. According to Audient, a maximum of two channels can use phantom power at the same time when the EVO 8 is connected via USB-A. If you’re setting up the recording yourself, you’ll want to monitor the signal and levels through headphones and choose a computer connection that’s compatible with the interface. This is the top priority for around 14% of consumers.

Common selection mistakes

  • Assuming four inputs means four microphone preamps

    The total number of analogue inputs doesn’t tell you how many microphones you can connect directly. Two of the MOTU M4’s four inputs are line inputs, while Tascam specifies four microphone preamps for the US-4x4HR.

    Check how many microphone preamps the exact model can use simultaneously, rather than just counting its analogue inputs.

  • Planning to power four phantom-powered microphones with the EVO 8 without checking the host connection

    Audient says that four inputs using phantom power at the same time require a USB-C host connection with 1.5 A; a maximum of two phantom-powered channels can be used simultaneously via USB-A.

    If all four microphones need phantom power, check that the USB-C port you plan to use can provide the required power before choosing an interface.

  • Expecting a bigger interface to solve room problems

    Extra inputs won’t change microphone placement or reduce distracting room or ventilation noise.

    First, listen to a short test recording in the room. Then decide whether you need additional, separate microphone tracks.

Key brands at a glance

Focusrite

The 4th-generation Scarlett 2i2 is an option for recording a stereo pair, with two microphone preamps and Direct Monitoring.

  • Focusrite lists Auto Gain and Clip Safe among its features.
  • The model has two microphone preamps, and the 48 V switch affects both inputs. Auto Gain and Clip Safe don’t demonstrate an independent sound-quality advantage.

Tascam

The US-4x4HR is worth considering if you want to connect the main pair and additional microphones at the same time.

  • Tascam specifies four microphone preamps, 48 V phantom power and two headphone outputs.
  • These features alone don’t prove that it sounds better than other models.

Steinberg

The UR44C is designed for setups with up to four microphones connected at once and two headphone connections.

  • The manual specifies four D-PRE microphone preamps and DSP monitoring.
  • According to the manual, the advertised 32-bit mode requires a compatible driver and a DAW that supports the format. It’s no substitute for suitable microphone placement.

Audient

The EVO 8 combines four microphone preamps with two headphone outputs.

  • Audient describes Smartgain as a tool to help you set your recording levels.
  • Four microphones using phantom power at the same time require a USB-C host connection with 1.5 A; a maximum of two phantom-powered channels can be used simultaneously via USB-A. Automatic level adjustment doesn’t guarantee a particular choir recording result.

MOTU

The M4 is an option for two microphones and additional line-level signals.

  • MOTU specifies two microphone combination sockets and two additional line inputs; the data sheet lists level meters.
  • Without additional preamps, the M4 isn’t suitable for connecting four microphones directly.

Suitable products at Joybuy

Suitable products coming soon.

Frequently asked questions

Do I need four microphone inputs for a stereo pair?

No, not if you only want to record two microphones separately at the same time. Allow for extra microphone preamps if you want additional microphones to have their own tracks in the same take.

Why does the rehearsal still sound unbalanced, even with extra inputs?

First, check the microphone positions, the balance between voices and any ventilation or other room noise. Extra channels won’t change these recording conditions by themselves.

Can the Audient EVO 8 provide phantom power to four condenser microphones at the same time through any USB connection?

No. Audient specifies a USB-C host connection capable of supplying 1.5 A for four inputs using phantom power at the same time. With USB-A, a maximum of two phantom-powered channels can be used simultaneously.

What are my rights regarding complaints and cancellations when shopping online in Germany?

The Verbraucherzentrale distinguishes between your statutory rights if goods are faulty and a voluntary guarantee. Most goods ordered online are generally covered by a 14-day cancellation period from the date you receive them; check the terms of your specific purchase.

Can I secretly record a choir rehearsal, including conversations?

Under § 201 StGB, secretly recording another person’s private spoken words without authorisation is a criminal offence. The Federal Ministry of Justice and the Federal Office of Justice include this provision in the text of the law. Before recording conversations or sharing any recordings, get the people involved to agree. Further requirements may depend on the circumstances and how the recording will be used.