Which setup is right for you?

Users of a stereo pair

If you want to record two microphone signals separately, check how many microphone inputs can be used at the same time and plan your microphone placement for a balanced choir recording. Shure explains that capturing the voices evenly is a matter of microphone placement.

Planning a multi-track setup

If you want to record additional microphones alongside the main pair, each on its own track at the same time, the number of microphone preamps matters – not just the total number of inputs and outputs. Think in advance about which sources you really want to record separately.

Sharing a desk

If you share your workspace with others or pack the equipment away after rehearsals, factor the headphone socket, controls, cable routing and power supply into your setup. It’s also worth checking in advance that the interface will connect to your computer.

What should you look for when buying?

Two microphone preamps

A good fit if: You’re recording no more than two separate microphone signals at once, for example with a stereo pair.

Bear in mind: Two microphone preamps aren’t enough for a third microphone recorded at the same time.

Four microphone preamps

A good fit if: You want to record additional microphones alongside the main pair at the same time, each on a separate track.

Bear in mind: More microphones mean more cables and planning. Their placement and the room acoustics still matter.

Two-channel interface with 32-bit float recording

A good fit if: Handling large changes in volume is important to you and your software supports the intended recording workflow.

Bear in mind: Zoom describes this signal processing for the UAC-232. It doesn’t replace suitable microphone placement or additional microphone inputs.

Priority What to check when buying Who is it most important to?
Recording a stereo pair Check for two microphone inputs that can be used at the same time and, if needed, suitable phantom power. Focusrite notes that plugging a jack into the front of the Scarlett 2i2 4th Gen disables the rear microphone input on the same channel. If I want to record a stereo pair separately, I need two microphone signal paths that can be used at the same time. Around 40 % of consumers prioritise having two separate tracks for a stereo pair.
Monitoring at a shared desk Consider the headphone socket and level control, direct monitoring or a mix control, socket placement, power supply and computer compatibility. If I want to monitor quietly on headphones at a shared desk and pack the setup away afterwards, connections and cable routing matter. Around 30 % of consumers prioritise practical headphone use at their workspace.
Recording additional microphones separately Check the actual number of microphone preamps, not just the total number of inputs and outputs. Behringer lists four combo sockets on the UMC404HD, each with its own microphone preamp. If I want to record additional microphones alongside the main pair on their own tracks, I need extra microphone preamps. Around 20 % of consumers prioritise having more than two separate microphone tracks at the same time.
Changing recording levels Check the level display, recording workflow and software support. Focusrite lists Auto Gain and Clip Safe for the Scarlett 2i2 4th Gen; Zoom describes the UAC-232 as offering a 32-bit float recording workflow. If I expect significant changes in volume, I want to be able to monitor the levels appropriately. Around 10 % of consumers base their first choice on this priority.

Avoiding buying and setup mistakes

  • Counting every input and output as a microphone input

    Microphone preamps are what matter if you want additional separate microphone tracks. On the Scarlett 2i2 4th Gen, the XLR and front jack sockets share the input for the relevant channel.

    Before you buy, make a list of all the microphones you’ll be recording at the same time and check the channel layout of the specific model.

  • Assuming a higher bit depth means better choir sound

    Recording methods and resolution specifications vary by model. Shure’s microphone placement guide also emphasises that positioning and room sound affect the recording.

    First choose the right number of microphone inputs and plan your recording setup. Then assess any additional features in the context of your recording workflow.

  • Allowing space only for the device

    Microphone and headphone cables, as well as the power supply, also take up space at a shared desk. According to the manufacturer, the Behringer UMC404HD is powered by a mains adaptor, while the MOTU M2 is USB bus-powered.

    Plan for the device, accessible controls, cable routing, headphones and any power sockets you’ll need.

Key brands to consider

Focusrite

The Scarlett 2i2 4th Gen is a two-channel option for a pair of microphone signals. Focusrite lists Auto Gain and Clip Safe as features of this model.

  • Two rear XLR microphone inputs and one headphone output.
  • Plugging a jack into the front disables the microphone input on the same channel. Two microphone preamps aren’t enough for additional separate microphone tracks.

MOTU

The M2 has two combination microphone inputs. MOTU lists individually switchable 48 V phantom power and input and output level meters.

  • USB bus-powered according to the manufacturer, with a headphone output and hardware direct monitoring.
  • This model isn’t designed for more than two separate microphone inputs. Check that it meets your computer’s requirements before buying.

Steinberg

The UR22C is a two-channel option with two D-PRE microphone preamps and a monitor mix control.

  • The manufacturer also lists loopback and DSP effects.
  • These features don’t provide additional microphone inputs. The stated 32-bit resolution shouldn’t be confused with the recording workflow that Zoom specifically describes as 32-bit float.

Behringer

The UMC404HD is designed for setups where four microphone tracks need to be recorded separately at the same time.

  • According to the manufacturer, each of the four combo sockets has its own microphone preamp and switchable 48 V phantom power.
  • Product specifications state that the model is powered by the supplied mains adaptor. Make sure you have a suitable power socket at your shared desk.

Zoom

The UAC-232 is a two-channel option for anyone considering the 32-bit float recording workflow described by the manufacturer.

  • Zoom lists two XLR/TRS microphone inputs, 48 V phantom power and direct monitoring.
  • The manufacturer’s description doesn’t establish that it will produce a better choir recording regardless of microphones, room and software. There are still only two inputs for additional separate microphones.

Joybuy product selection

This selection includes an audio interface set with two microphones. Before buying, check that the connections and recording workflow suit the separate choir tracks you have in mind.

Yinkaer G10-P17-P17 podcast kit with two microphones

Yinkaer G10-P17-P17 podcast kit with two microphones

This set may suit you if you’re looking for a package that includes an audio interface or mixer and microphones. Check whether it’s suitable for recording your choir rehearsal on separate tracks.

According to the product name, the set includes two 3.5 mm condenser microphones and stands. The name also describes an audio mixer with effects.

View at Joybuy

Frequently asked questions

Do I need two inputs for a stereo microphone pair?

Yes, if you want to record both microphone signals as separate channels. Look for two microphone inputs that can be used at the same time. Placement and room sound also affect the balance.

How can I monitor the recording at a shared desk without speakers?

Check the headphone output, level control and monitoring controls. MOTU lists hardware direct monitoring on the M2; the manufacturer of the PreSonus Studio 24c describes a mix control that lets you blend the input signal with playback from your computer.

What should I test before the first choir rehearsal?

Check the computer connection and power supply, connect the microphones you plan to use to the right inputs, then check the signals through headphones. Make a short test recording and try different microphone positions. Shure’s recording guide recommends experimenting with positioning to find the right balance between direct sound and room ambience.

Who should I contact if something is faulty?

If you buy as a consumer from a trader, the trader is your point of contact for your statutory rights relating to faulty goods. The European Union’s consumer information states that purchases from a trader come with at least two years’ cover from the date you receive the goods. Any additional manufacturer’s warranty doesn’t replace these statutory rights.

Can I record and share a choir rehearsal in Germany?

Not in every case. Under § 77 UrhG, performers have the exclusive right to record a performance; § 78 UrhG also covers making it available to the public. Check the rights with everyone involved before recording or publishing. If personal data is being processed, you’ll also need an appropriate legal basis. Consent is one possible basis, but it isn’t the only one.