Which approach is right for you?

Documenting fine details

If you want to capture small components, solder joints or labels at a larger size, check the achievable magnification ratio and how sharpness falls off across raised details. Canon Europe and Sony Deutschland offer guidance on macro photography and focus stacking.

Archiving whole circuit boards

For repeatable shots of mostly flat circuit boards, the key factors are suitable framing, consistent alignment and enough sharpness across the area you need to capture. Your choice can be guided by lens specifications from Tamron Europe and Nikon Deutschland, as well as Canon Europe’s product photography advice.

Photographing with a fixed lighting setup

If you need room in front of and beside the circuit board for lighting and diffusion, check the distance between the front of the lens and the subject at your chosen framing. You’ll also need to manage reflections and achieve a consistent white background through your lighting setup; Canon Europe and Nikon Deutschland offer practical advice and lens specifications to help.

What should you look for when buying?

First, check that the mount and framing suit your camera and circuit board. Then consider the space available for lighting and what it will take to achieve consistent sharpness.

Priority What to check when buying Who is this important to?
Show small features at a larger size Check that the mount is compatible, then compare the specific model’s maximum magnification ratio with the size of the details you want to show. If I want to show solder joints or labels clearly, I need a sufficiently large view of those details. Around 31% of consumers put detail size first.
Capture the whole circuit board Match the circuit board’s dimensions to the sensor format and framing; for a mostly flat board, position the camera as parallel to it as possible. For a repeatable overall view, I want to capture the whole circuit board, including its edges. Around 25% of consumers put this framing first.
Room for lighting and reflection control Check the clearance between the front of the lens and the circuit board at your chosen framing; test your lighting position and diffusion with your own setup. If I need to position lights to the side and control reflections, I need enough room beside the subject. Around 25% of consumers put their lighting setup first.
Connection and shooting workflow Check that the exact mount variant is compatible with your camera body; make sure your existing camera, tripod and software support the focus workflow you have planned. If I want to keep using my existing equipment, a compatible mount and a manageable setup matter to me. Around 19% of consumers prioritise this combination.

Common buying misconceptions

  • Assuming “macro” in the name means a specific magnification ratio

    Maximum magnification ratios vary from lens to lens. Canon lists a maximum of 0.5x for the RF 85 mm and 1.4x for the RF 100 mm.

    Compare the stated maximum magnification ratio with the size of the features you actually want to show.

    You may need an additional lens to capture very small details.

  • Confusing minimum focusing distance with the working space in front of the lens

    Nikon states that, at its closest focusing point, the Z MC 50 mm leaves around 5 cm between the lens and the subject. This can limit the room available for lighting.

    Check the distance from the front of the lens to the circuit board at your chosen framing, rather than relying only on the minimum focusing distance.

    Depending on your setup, you may need to change the lighting position or choose a different lens.

  • Assuming a wide aperture or stabilisation guarantees a sharp image across the whole circuit board

    In close-up photography, raised components may fall outside the plane of focus. A stable camera alone can’t keep features at different heights sharp at the same time.

    Test your shooting workflow with a populated circuit board and, if necessary, plan to take shots at multiple focus settings.

    This workflow may require a tripod, suitable lighting and extra time for focus stacking.

Key lens brands to consider

The details below apply to the specific models and mounts listed, not to every product range from each brand.

Tamron

The 90 mm F/2.8 Di III MACRO VXD, model F072, is a 1:1 macro option for compatible Sony E and Nikon Z cameras.

  • Tamron advertises flat-field correction for this model, designed for flat subjects.
  • This is a manufacturer’s claim, not an independent comparison using circuit boards. Make sure the mount variant is compatible with your camera.

Nikon

For Nikon Z cameras, options include the Z MC 50 mm and Z MC 105 mm VR S, both with a maximum magnification ratio of 1:1.

  • Nikon gives both models a maximum magnification ratio of 1:1.
  • Nikon states that, at its closest focusing point, the Z MC 50 mm leaves around 5 cm between the lens and the subject; this can limit your lighting options.

Canon

For compatible Canon RF cameras, the RF 85 mm F2 MACRO IS STM and RF 100 mm F2.8L Macro IS USM differ in their maximum magnification ratio.

  • Canon lists a maximum of 1.4x for the RF 100 mm, compared with a maximum of 0.5x for the RF 85 mm.
  • The magnification you need depends on the size of the details you want to show; stabilisation doesn’t guarantee sharpness across raised components.

Sony

For Sony E cameras, the FE 90 mm F2.8 Macro G OSS, with a maximum magnification ratio of 1:1, and the FE 100 mm F2.8 Macro GM OSS, with a maximum of 1.4x, offer two different options.

  • Sony lists optical stabilisation for both of these models.
  • This doesn’t prove an advantage when the camera is fixed in place, or guarantee any particular level of reflection control on circuit boards.

Sigma

The 105 mm F2.8 DG DN Macro | Art is available with Sony E and L-Mount fittings as a 1:1 option.

  • The two mount variants give you options for compatible Sony E and L-Mount cameras.
  • The specifications listed don’t prove that this model is universally better than lenses from other brands.

Products to consider on Joybuy

Related products will be available soon.

Frequently asked questions

Do I need 1:1 magnification to photograph the whole circuit board?

No. 1:1 means the subject is reproduced at life size on the sensor; it’s not a requirement for an overall view. Compare the circuit board’s dimensions with your desired framing. Higher magnification may be important for very small individual details.

How can I keep components at different heights on a populated circuit board in focus?

Position the camera securely, especially when photographing mostly flat areas. If components protrude beyond the plane of focus, you can combine shots taken at different focus settings into one image. Check that your camera body and software support this workflow.

How can I avoid a grey-looking white background or distracting reflections?

Test your lighting, diffusion, exposure and white balance with your own setup; the lens alone can’t control these factors. A tripod can help you keep the background and framing consistent between shots.

What are my rights if a product is faulty or I cancel an online order in Germany?

According to information from Your Europe, consumer purchases from a trader are generally covered by a legal guarantee lasting at least two years from the date you receive the goods. Consumers generally have a 14-day right to cancel online purchases, although exceptions apply and the right must be explained. Don’t assume these rules apply to business purchases or private sales without checking.