Who are the different options best suited to?

Documenting circuit boards

If you want to photograph the whole board or a larger area regularly, you’ll need suitable framing, a stable overhead view and well-positioned lighting. Leica Microsystems describes both overview shots and the depiction of fine details as part of circuit board inspection. Nikon also highlights the benefits of using a tripod when photographing small objects.

Inspecting solder joints

For individual contacts or small components, you’ll need to balance the level of detail against the space in front of the lens. Sony Deutschland specifies a working distance of 2.4 cm at the closest focusing distance for the SEL30M35 macro lens. You’ll need to take this into account when positioning your lighting.

Working with limited table space

If your camera, circuit board and lighting all need to fit on a small table, consider the entire setup rather than just the camera body. A mirrorless camera also needs a lens and, potentially, a mount. With a digital microscope, you’ll need to consider its footprint and the range of movement of its stand.

What should you look for when buying?

Criterion What to check before buying Who is this important to?
Keeping the whole board in view Check the framing against the size of the boards you usually work with. For repeated shots, plan for a stable overhead view. When I document the whole board, I want the edges and important labels to remain visible in the same shot. This overview is the top priority for around 36% of consumers.
Seeing small details Check the reproduction ratio of the specific lens. Canon Deutschland specifies a maximum of 1:2 for the RF 35mm F1.8 MACRO IS STM, while Sony Deutschland specifies a maximum of 1:1 for the SEL30M35. When I want to show individual solder joints or components, I need the right close-up without losing sight of the working distance required for lighting. These details take priority for around 29% of consumers.
Making room for the setup Plan for the board, mount and lighting to fit together on the available table space. With a mirrorless camera, remember to allow for the separate lens too. When my table space is limited, the complete setup needs to fit in the available area. Around 21% of consumers prioritise a compact setup.
Controlling light and focus For reflective contacts, check whether the lighting can be adjusted or diffused. If components are at different heights, consider whether you’ll need multiple focus planes. Canon Academy explains that depth of field decreases as you get closer to your subject. If reflections or differences in height could obscure details, I want to be able to adjust the lighting and focus precisely. For around 14% of consumers, these challenging surfaces are the most important consideration.

Common selection mistakes

  • Assuming a macro reproduction ratio applies to the camera body

    The 1:2 and 1:1 figures refer to specific macro lenses. They don’t automatically apply to a camera body or to every kit with a zoom lens.

    Before buying, check the full kit name, the lens mount and the maximum reproduction ratio of the lens actually included.

  • Choosing based only on the highest magnification figure

    When inspecting circuit boards, you may need both an overview and fine detail. Magnification figures shown on a microscope screen aren’t directly comparable with the optical reproduction ratio of a camera lens.

    First decide what area needs to be visible in the final image, then check the working distance for the subject you’ll be photographing.

    Capturing multiple focus planes may require extra shots and subsequent image processing.

  • Leaving lighting and the mount until after you’ve chosen the camera

    There may be little room for lighting when taking close-ups, and reflections from metal contacts can obscure important details.

    Measure the available table space and plan for the board, lens, mount and lighting as one complete setup.

Relevant brands at a glance

OM SYSTEM

The Tough TG-7 is a compact camera with an integrated lens, making it worth considering if you want to take photos without changing lenses.

  • OM Digital Solutions specifies close-up photography from as little as 1 cm with the Tough TG-7.
  • The close-up distance alone doesn’t tell you whether the whole board will fit in the frame or leave enough room for lighting.

Canon

You can build an EOS R system around a separately selected macro lens for close-up photography.

  • Canon Deutschland specifies a maximum reproduction ratio of 1:2 for the RF 35mm F1.8 MACRO IS STM. Canon Deutschland also says the EOS R50 has a vari-angle screen.
  • The lens specification applies to this lens, not to the camera body or every camera kit. A different reproduction ratio may be needed for smaller details.

Sony

The E-mount α6400 can be paired with the separately selected SEL30M35 macro lens.

  • Sony Deutschland specifies a maximum reproduction ratio of 1:1 for the SEL30M35.
  • According to Sony Deutschland, the working distance in front of the lens is 2.4 cm at the closest focusing distance. Plan your lighting carefully, and bear in mind that this figure doesn’t automatically apply to an α6400 kit with a different lens.

Nikon

The separately available NIKKOR Z MC 50mm f/2.8 is a macro option for a Z-system camera.

  • Nikon Deutschland specifies a maximum reproduction ratio of 1:1 for this lens and a distance of approximately 5 cm between the lens and subject at the minimum focusing distance.
  • Check that the lens mount is compatible with your camera and confirm what’s included. The lens specifications don’t automatically apply to every Z50II offer.

Andonstar

The AD246S-M is a digital microscope for viewing small areas of circuit boards at your workbench.

  • Andonstar describes the AD246S-M as having an adjustable stand, multiple lenses and image output to both its built-in screen and an HDMI monitor.
  • The microscope’s magnification figures aren’t directly comparable with the optical reproduction ratio of a camera lens. Also check the exact model variant: according to Andonstar, the AD249S-M only outputs to an HDMI monitor.

Joybuy products

Related products will be available soon.

Frequently asked questions

Is a kit lens enough for photographing tiny solder joints?

You can’t tell from the camera body alone. Check the reproduction ratio of the lens actually supplied and the framing you need. The 1:2 and 1:1 figures apply to the specific macro lenses mentioned.

How should I set up for repeatable circuit board photos?

Position the camera as steadily as possible above the board and adjust the lighting so that contacts and labels remain visible. Multiple focus planes can help with very small details at different heights, but this requires extra shots and image processing.

Does a digital microscope always need a computer?

Not necessarily. According to Andonstar, the AD246S-M has a built-in screen and can also be used with an HDMI display. Check the exact model variant and make sure its power supply suits your setup.

What statutory rights do I have when buying from a trader?

For goods bought from traders in the EU, the official EU portal specifies a legal guarantee of at least two years from the date you receive the goods. This is separate from any additional manufacturer’s warranty. According to the portal, these EU rules don’t apply to purchases from private individuals.

How do I dispose of an old camera or digital microscope in Germany?

Waste electrical and electronic equipment must not be put in household rubbish. It needs to be taken to an authorised collection point. Germany’s Federal Ministry for the Environment, Climate Action, Nature Conservation and Nuclear Safety lists local authorities, manufacturers and retailers as possible contact points. Retailers’ obligations depend, among other things, on their sales area, the size of the device and whether you’re buying a replacement.