Which option is right for you?

For documenting fine details

If you need to make small components or solder joints clearly visible, consider magnification, working distance and depth of field together. Canon UK and Nikon UK offer different lens options and magnification ratios for this purpose.

For photographing assemblies

For repeatable overview shots of whole circuit boards, the key factors are framing, a fixed camera position and consistent lighting. A standard zoom can make it easier to adjust your framing; Canon UK describes this option for the RF-S 18–45mm.

For occasional close-ups

If you want to photograph individual areas without changing lenses, a compact camera with a close-up function is worth considering. Check that its short working distance leaves enough room for your lighting. OM Digital Solutions describes this close-up option for the Tough TG-7.

What should you look for when buying?

Mirrorless camera with standard zoom

A good fit if: You mainly want to photograph whole circuit boards and larger assemblies.

What to consider: A kit zoom is not the same as a 1:1 macro lens. Check the magnification ratio of the lens actually included.

Mirrorless camera with macro lens

A good fit if: You want small components or solder joints to appear large in the frame.

What to consider: A compatible macro lens is an extra purchase. If components vary in height, depth of field may also be a consideration.

Compact camera with close-up function

A good fit if: You want to photograph small areas occasionally without changing lenses.

What to consider: A very short working distance can limit the space available for lighting and a clear view of your subject.

First decide how small the details need to be to remain visible. Then plan your framing, working distance and lighting around a fixed shooting set-up.

What you need What to check before buying Who is this important to?
Capture small details Check the maximum magnification ratio and working distance of the specific lens. If I need to document small solder joints, what matters is how large they appear in the frame with the lens. Around 31% of consumers put the visibility of small details first.
Photograph whole circuit boards Check the angle of view and distance for your planned desk set-up, and check what’s included in the kit. If I want the whole board, including its edges, in the frame, I need suitable framing and a repeatable camera position. Around 25% of consumers prioritise full-board overviews.
Keep colours and whites consistent Keep the lighting as even as possible, and check white balance, shadows and reflections in a test shot. If photos of circuit boards need to be comparable, I want to avoid changing light and distracting reflections. Around 25% of consumers pay particular attention to consistent results against a white background.
Keep the shooting process simple Allow for lens changes, the actual working distance and, if necessary, multiple focus planes. If I only photograph small areas occasionally, I want to keep the set-up straightforward without using more magnification than my subject requires. Around 19% of consumers prioritise a simple process.

Common pitfalls

  • ‘Macro’ doesn’t automatically mean a particular magnification ratio

    The lenses mentioned have different specifications. Canon UK gives the RF-S 18–45mm a maximum magnification of 0.25x in manual close-focus mode, while the RF 35mm has a 1:2 magnification ratio. Nikon UK gives the NIKKOR Z MC 50mm a 1:1 magnification ratio. Each figure applies to the specific lens and, where relevant, a particular focus mode.

    Compare the magnification ratio and working distance of the exact lens, and check whether it’s included in the package.

    A separate compatible macro lens means an extra purchase.

  • Confusing minimum focusing distance with working distance

    These distances are measured differently. Sony UK distinguishes the distance from the sensor from the space in front of the lens. A short working distance can make it harder to position your lighting.

    Sketch out the camera, circuit board and light sources at your actual work station, and check the distance for the specific lens.

    You may need a different lighting set-up if you can’t position the lights suitably near the subject.

  • Assuming a white background means consistent colours

    A white surface alone doesn’t guarantee neutral or repeatable colours. Changing or mixed lighting can alter how colours appear between shots, as Nikon UK explains.

    Keep your set-up as consistent as possible, and check the lighting, shadows, reflections and white balance with a test shot of a circuit board.

    Allow extra time in your shooting process to control the lighting and set the white balance.

Notable brands and systems

Canon

The EOS R50 with an RF-S standard zoom is an option for circuit-board overviews. A compatible RF macro lens is a separate choice for capturing fine details.

  • Canon UK lists the EOS R50 as having 24.2 MP and an RF mount. According to Canon, the RF-S 18–45mm offers up to 0.25x magnification in manual close-focus mode.
  • The standard zoom’s magnification ratio is not the same as that of the separately available RF 35mm F1.8 MACRO IS STM, which Canon lists as 1:2.

Nikon

The Z50II is a DX camera body with interchangeable lenses. Compatible Z macro lenses offer a separate option for capturing fine details.

  • Nikon UK lists the Z50II as having 20.9 MP and the NIKKOR Z MC 50mm f/2.8 as having a 1:1 magnification ratio.
  • The macro lens isn’t listed as included with the camera body. Check the specific combination of body and lens.

OM SYSTEM

The Tough TG-7 is a compact camera for close-ups without changing lenses.

  • OM Digital Solutions lists around 12 MP and close-ups from as little as 1 cm away.
  • Check that the short working distance suits your planned lighting set-up; it isn’t the same as a 1:1 magnification ratio.

Sony

E-mount macro lenses are worth comparing if you already own a compatible Sony camera body or are putting together a system.

  • Sony UK lists the SEL30M35 as having a working distance of around 2 cm.
  • The space in front of the lens may limit where you can position the lights around the circuit board. This lens specification doesn’t indicate performance with every Sony camera body.

Panasonic

The LUMIX DC-TZ300 is a compact camera option if you want a built-in zoom for a range of shooting situations as well as close-ups.

  • Panasonic UK lists 20.1 MP, a built-in 15x zoom, Post Focus and Focus Stacking.
  • Check that the working distance and controls of the specific model suit your circuit board and lighting set-up.

Related products on Joybuy

Related products coming soon.

Frequently asked questions

Is a kit lens good enough for small solder joints?

It depends on the magnification ratio of the included lens and how large you want the subject to appear in the frame. Canon UK lists up to 0.25x magnification for the RF-S 18–45mm in manual close-focus mode; the separately available RF 35mm macro lens offers 1:2 magnification, according to Canon.

How can I get comparable results against a white background across different circuit boards?

Keep the camera position and lighting as consistent as possible, and set the white balance to match the lighting you’re using. If the lighting conditions change, check the white balance again and use a test shot to check the background, shadows and reflections.

Do I need Focus Stacking for components of different heights?

Only if a single shot doesn’t provide the depth of field you need. According to Nikon UK, Focus Stacking combines images taken with different focus points. Check whether the specific camera model offers this function and whether it suits your process.

What extra costs and rights should I consider when buying in Germany?

Check whether the lens, tripod and lighting are included in the specific offer. For distance contracts with consumers, § 312g BGB generally provides a right of withdrawal, subject to statutory exceptions; § 355 BGB sets out a 14-day period. Business purchases are different. Statutory rights relating to defects are also separate from a voluntary manufacturer’s warranty.

Where should I take an old camera and its battery?

The German Environment Agency advises against disposing of old electrical equipment in household waste. Take the camera to an appropriate collection point. Remove the battery before handing it in if you can do so easily, and put it in a separate battery collection point.