Which solution is right for you?

Detail inspectors

You want to capture small components or markings at a larger size. Check the close-focusing capability and magnification ratio of the specific lens, or try the framing of a built-in close-up mode on your subject.

Circuit board documenters

You regularly photograph entire circuit boards, including populated ones, and need consistent framing and sharpness across components of different heights. A stable set-up and, if necessary, several focus planes may be important.

Photographers just getting started

You want to start out by a window without a complicated set-up. Before buying extra accessories, consider whether a built-in close-up mode or an existing or supplied lens is enough for your subjects.

What should you look for when buying?

Base your choice on what matters most for your subject: the smallest detail, sharpness across components of different heights, lighting or a simple set-up.

Priority What to check before buying Who is this most important to?
Capturing small details at a larger size Check the magnification ratio of the specific lens, or test the framing of the built-in close-up mode on a subject of the same size. If I want to inspect solder joints or small markings, the detail in question needs to appear large enough in the image. Around 33% of consumers prioritise magnifying details above all else.
Keeping components of different heights in focus Check whether the specific camera body supports focus bracketing or stacking, and plan for a stable set-up. When photographing a populated circuit board, I don’t want just one height to be in focus. Around 27% of consumers prioritise this.
Controlling window light Try different camera positions and lighting directions, and use a white reflector card if needed. Check the captured image for shiny areas. If shadows or reflections obscure details, I want to be able to adjust the lighting in my set-up. Around 20% of consumers prioritise having control over window light above all else.
Getting started with minimal extra equipment Check what’s included and test whether the close-up mode or supplied lens can achieve the framing you need. I want to start with just a few components and decide whether to buy more based on the subject. Around 20% of consumers prioritise this.

Avoid common misconceptions

  • ‘Macro’ or a short focusing distance doesn’t guarantee the right framing

    The minimum focusing distance alone doesn’t tell you how large a particular marking or solder joint will appear in the final image. A standard zoom may also have different limitations for close-ups from a dedicated macro lens.

    Test it on a circuit board of a similar size and compare the framing. If you’re using an interchangeable-lens camera, check the magnification ratio of the lens actually included.

  • A fast lens doesn’t automatically keep an entire populated circuit board in focus

    At a short shooting distance, the depth of field can be very shallow. Canon describes focus stacking as combining several shots taken at different focus planes. Whether a camera has the required feature depends on the specific body.

    Check the depth of field you need on your subject and find out whether the camera body offers focus bracketing or stacking. A stable set-up helps when shooting a focus stack.

  • A more expensive camera won’t get rid of reflections from window light by itself

    Lighting and camera position affect how the circuit board appears in the image. Buying a camera alone won’t control the lighting.

    Start by trying different positions for the camera and circuit board. For a product that looks too dark on one side by a window, Canon recommends using a reflector or white card. Check how it affects shiny areas on your circuit board.

Camera brands at a glance

OM SYSTEM

The Tough TG-7 has a built-in Microscope mode for close-ups, so you don’t need to change lenses.

  • OM SYSTEM specifies focusing from 1 cm in Microscope mode and a 12-megapixel sensor for the TG-7.
  • The focusing distance doesn’t tell you whether the framing will suit an entire circuit board or make a particular marking legible.

Canon

The EOS R system lets you choose between a standard zoom for wider views and separately selected RF macro lenses.

  • The EOS R50 package researched includes an RF-S 18–45mm F4.5–6.3 IS STM. Canon specifies magnification of up to 0.25x for this lens when focusing manually.
  • Magnification of up to 1.4x applies to the separate RF 100mm F2.8L Macro IS USM, not the kit lens. Manufacturer specifications are not a comparative assessment of suitability for circuit boards.

Nikon

The NIKKOR Z MC 105 mm 1:2,8 VR S is a documented macro option for compatible Z system cameras.

  • Nikon specifies a magnification ratio of up to 1:1 for this lens and recommends using a tripod for small, stationary subjects.
  • The lens and camera body need to be compatible. The lens specification doesn’t establish the performance of an unspecified kit.

Sony

The E-mount system offers a documented macro option in the FE 90 mm F2.8 Macro G OSS.

  • Sony specifies a maximum magnification of 1x and optical stabilisation for this particular lens.
  • Before buying, check that the mount is compatible with your camera and that the framing suits your subject.

Fujifilm

The FUJINON XF80mmF2.8 R LM OIS WR Macro is a documented macro option for compatible X cameras.

  • Fujifilm specifies a maximum magnification ratio of 1x for this lens.
  • According to Fujifilm, the lens weighs approximately 750 g without caps. This isn’t the weight of the complete camera set-up, nor is it an independent assessment of its suitability for circuit boards.

Joybuy products

Related products coming soon.

Frequently asked questions

Is a short focusing distance enough to make component markings legible?

No. The focusing distance alone doesn’t guarantee that the marking will appear large enough in the image. Test the framing on a subject of the same size. If you’re using an interchangeable lens, the maximum magnification ratio specified for that particular lens is also useful.

How can I keep a populated circuit board in focus across components of different heights?

Set up the camera and circuit board securely. If a single shot doesn’t provide enough depth of field, look into focus bracketing and combining several focus planes. Not every camera body is confirmed to combine them in-camera.

What should I try first when the window light comes from one side?

Keep the framing fixed and try placing a piece of white card or a reflector on the darker side. Check the effect directly on the circuit board, especially around shiny areas.

What should I bear in mind about costs and service when buying online in Germany?

When choosing a camera package, check whether you’ll need an additional lens for your subjects. If new goods are faulty, you generally have statutory rights against the seller; a voluntary guarantee is separate from these. Consumer distance sales are generally subject to a 14-day right to cancel, subject to statutory conditions and exceptions, as explained by the Verbraucherzentrale.

What does the CE marking tell me about a camera?

The European Commission explains that there is no central EU body that issues approval or a certificate for the use of the CE marking. On its own, the marking doesn’t show that a camera is suitable for photographing circuit boards.