Which option is right for you?

Classical music listeners who value detail

If you listen closely to whole LP sides, check the cartridge, compatible replacement stylus, tracking force and the speeds your records require. Audio-Technica describes the replaceable styli available for the VM95 series, while Ortofon warns that incorrect tracking force can cause mistracking and increased record wear.

Listeners in open-plan lofts

If your speakers are close to your turntable, its position should be part of your decision. Audio-Technica explains that speaker vibrations can affect the stylus and cause skipping.

Listeners with an existing system

If you want to use an existing amplifier or active speakers, check in advance whether you need to connect a phono or line signal. Technics, Dual and Audio-Technica describe built-in or switchable phono stages on certain models; the Rega Planar 1 manual requires a suitable external phono stage.

What should you look for when buying?

First, check where you plan to place the turntable and which connections your system has. Then compare the tracking and controls of the specific model with your LPs and listening habits.

What matters What to check when buying Who is it especially important to?
Tracking and speed The cartridge and compatible replacement stylus, recommended tracking force, and the speeds required by your LPs. If I want to listen closely to classical LPs, I look for suitable tracking and speed. For consumers with this priority, it is likely to be the most important buying consideration for around 31%.
Placement in a loft A level, stable surface as far from speakers as possible; check the spot while moving around the room, too. If there are speakers nearby, I want to find a spot with as little vibration as possible. This placement issue is likely to be the top priority for around 31% of consumers.
Connecting to your system The inputs on your amplifier or active speakers, as well as the phono stage and output setting of the specific model. If I want to keep using my existing system, the signal must match the relevant input. For around 23% of consumers, this connection requirement is likely to be the most important buying consideration.
Operation at the start and end of an LP For the specific model, check separately who places the tonearm, lifts it at the end and returns it. If I want to do as little as possible while playing a record, I look at the actual level of automation. Ease of use is likely to be the top priority for around 15% of consumers.

Common misconceptions

  • Anti-vibration feet guarantee a suitable spot

    Speakers nearby can transmit vibrations to the stylus. A model’s anti-vibration specifications don’t prove that every spot in a loft will be free from vibration.

    First, find a level, stable position as far from the speakers as possible.

  • Phono and line connections are interchangeable

    The connection you need depends on whether the turntable has a built-in phono stage and which inputs your system offers. The Rega Planar 1 manual requires a suitable phono stage.

    Check the output of the specific model against the inputs on your amplifier or active speakers.

  • An automatic end-of-record lift means full automation

    Technics describes the SL-1500C as lifting the tonearm at the end of a record. Audio-Technica, by contrast, describes the AT-LP60XBT as fully automatic; the operating steps differ between models.

    For the specific model, check separately who places the tonearm, lifts it at the end and returns it.

A guide to notable brands

Technics

The SL-1500C is aimed at listeners who want to place the tonearm themselves and use an integrated phono equaliser.

  • Technics lists a supplied cartridge and an automatic end-of-record lift for the SL-1500C.
  • The end lift doesn’t place the tonearm on the record; also check that the placement and connection suit your system.

Dual

The manual CS 518 is an option if you want to adjust the tonearm and anti-skating yourself, and choose a connection that suits your system.

  • Dual lists an Ortofon 2M Red and a switchable MM phono preamp.
  • Tracking force and anti-skating need to be adjusted; design details about damping are no substitute for checking the placement.

Audio-Technica

The models listed cater for different preferences: the AT-LP120XUSB is manual, while the AT-LP60XBT is described as fully automatic.

  • For the AT-LP120XUSB, Audio-Technica lists adjustable tracking force and a pre-fitted VM95E stylus; the AT-LP60XBT offers Bluetooth and wired connections.
  • The AT-LP120XUSB requires some adjustment. For the AT-LP60XBT, check that its available connection options suit your system.

Rega

The manual Planar 1 is aimed at listeners who prefer a pre-fitted cartridge and preset bias.

  • Rega lists a pre-fitted Carbon cartridge; the bias is preset by the manufacturer.
  • The manual requires a suitable phono stage and explains how to change the speed by repositioning the belt.

Pro-Ject

The Debut Carbon EVO and Debut EVO 2 are different models and should be judged by their respective specifications.

  • Pro-Ject describes the Debut EVO 2 as having a damped aluminium platter and a Pick it MM EVO cartridge.
  • These specifications apply to the Debut EVO 2 and can’t be assumed to apply to the Debut Carbon EVO.

Joybuy products

This selection includes turntables for LPs at 33⅓ or 45 U/min, including a model described as fully automatic and models with built-in speakers.

SHARP RP-TT95 fully automatic turntable

SHARP RP-TT95

An option if you want to keep handling to a minimum when playing a record and are looking for a switchable phono/line connection.

Fully automatic; AT-3600L cartridge; 33⅓ and 45 U/min; Bluetooth 5.4; USB-C recording; RCA outputs with built-in preamp and PHONO/LINE setting.

View at Joybuy
XJ-HOME XJ-H01 turntable with built-in speakers

XJ-HOME XJ-H01

An option if you’re looking for adjustable counterweight and built-in speakers in one device.

Carbon-fibre tonearm; AT-3600L cartridge; adjustable counterweight; four built-in speakers; 33⅓ and 45 U/min; phono/line outputs.

View at Joybuy
XJ-HOME XJ-H02 retro turntable with four built-in speakers

XJ-HOME XJ-H02

An option if you want to use four built-in speakers and phono/line RCA outputs.

AT-3600L cartridge; 33⅓ and 45 U/min; belt drive; Bluetooth; four built-in speakers; PHONO and LINE RCA outputs.

View at Joybuy

Frequently asked questions

Do I need an additional phono preamp for the Rega Planar 1?

The Rega Planar 1 needs a suitable phono stage, which the manual says should be connected to the phono output. It may already be part of your system. The Planar 1 Plus is a different model variant and, according to Rega, has a built-in MM phono stage.

How should I position a turntable in a loft?

Choose a level, stable surface and avoid placing the turntable right next to a speaker. Audio-Technica notes that vibrations can affect the stylus and cause skipping. If the tonearm is adjustable, set the tracking force according to the cartridge in use.

Is an automatic end-of-record lift the same as full automation?

No. An end lift raises the tonearm at the end of a record; it doesn’t place it on the record automatically. Technics describes this feature on the SL-1500C, while Audio-Technica describes the AT-LP60XBT as fully automatic. Check which steps are actually automated on each model.

Which speeds do my LPs need?

Check the speed shown on each record and choose a model that supports it. The Joybuy models listed here specify 33⅓ and 45 U/min; the genre alone doesn’t mean you need 78 U/min.