Who are the different types of headphones suitable for?

Checking individual interview sections

If you listen to short speech passages repeatedly, you’ll want to judge what’s actually clear in the recording you have. Headphones can’t remove interference that’s already in the file.

Listening back in a shared workspace

If you want to limit outside noise where you’re listening and avoid disturbing others with sound from your headphones, their design and fit are important factors to consider.

Listening back in different places and on different devices

If you play downloaded files while you’re out and about or on different devices, weigh up the connection, operating mode and noise at each listening spot.

What should you look for when choosing?

Closed-back, wired studio headphones

A good fit if: You repeatedly check speech sections at your desk, have a suitable audio output and want passive isolation from noise where you’re listening.

Things to consider: Isolation also depends on the fit. The cable, clamping force and fit can all matter during longer listening sessions.

Closed-back ANC headphones

A good fit if: Outside noise makes it difficult to listen back in changing or louder environments.

Things to consider: ANC can reduce current background noise, particularly steady sounds, but changing voices may still be audible. You’ll also need to consider the operating mode and battery when using ANC.

Open-back studio headphones

A good fit if: You’re listening alone in a quiet environment, where neither outside noise nor sound escaping from your headphones is a problem.

Things to consider: Open-back headphones provide less isolation than closed-back models. Check the sound using your own voice recording.

What matters to you What to look for when buying Who is this especially important to?
Assessing speech in the recording Listen to a difficult section of your own file at a moderate volume; don’t assume ANC will process the recording. If you repeatedly check words and short passages in a club recording, you’ll want to judge what the file actually makes audible. Around 36% of consumers put speech clarity first.
Noise where you’re listening Check the fit and sound leakage; assess ANC against the noise in the place where you’ll actually be listening. If conversations or other outside noise drown out quiet parts of the interview, isolation where you’re listening matters to you. Around 29% of consumers prioritise this.
Comfort when listening repeatedly Try the fit and clamping force for as long as possible; check that replacement ear pads are available for the exact model version. If you listen to lots of passages more than once, you’ll want headphones that fit comfortably for longer sessions. Around 21% of consumers put long-term comfort first.
Connection and operating mode Check the audio output, plug or Bluetooth playback against your own device and the exact model variant. If you play the file on different devices, the audio connection needs to suit the way you use each one. Around 14% of consumers prioritise connections and use with different devices.

Which mistakes should you avoid?

  • Expecting ANC to repair a noisy interview recording

    ANC targets noise in your current surroundings. It won’t remove interference that’s already part of the saved recording.

    Listen to a difficult section of your own file and distinguish between noise in the recording and noise where you’re listening.

  • Assuming similarly named models and impedance versions are identical

    The beyerdynamic DT 770 PRO is available in different impedance versions. Connections and accessories need to match the specific version you choose.

    Before buying, check the full model name and plug against the audio output on your playback device.

  • Choosing open-back headphones for a shared listening space just because of their design

    Open-back headphones provide less isolation from your surroundings and let more sound escape. This can be disruptive in a shared workspace.

    Compare open-back and closed-back models in the conditions you’ll actually be listening in.

Which brands are worth considering?

Sennheiser

The wired, closed-back HD 280 PRO is an option for monitoring, with replaceable ear pads.

  • Sennheiser states that the HD 280 PRO reduces ambient noise by up to 32 dB. This is a manufacturer’s claim; performance depends on factors including fit and positioning.
  • Make sure the coiled cable and fit suit your workspace and longer listening sessions.

beyerdynamic

The closed-back DT 770 PRO, 32 Ohm, is a wired option; the DT 990 PRO, 80 Ohm, is an open-back model for quiet listening spaces.

  • For the DT 770 PRO, 32 Ohm, beyerdynamic lists replaceable ear pads and a 3.5 mm plug with a 6.35 mm adapter.
  • The open-back DT 990 PRO doesn’t provide the isolation of a closed-back model. beyerdynamic describes its treble as prominent. Take care not to confuse the impedance versions.

Audio-Technica

The wired, closed-back ATH-M40x is worth considering as a monitoring model if its connection and cable suit the way you’ll use it.

  • Audio-Technica specifically lists a replacement cable for the ATH-M40x.
  • The manufacturer’s description of precise sound reproduction and isolation isn’t a listening test using your interview file. Check the accessory details for the exact model variant.

Sony

The closed-back WH-1000XM6 is a Bluetooth and ANC option for changing listening environments; Sony says it can also be used with a cable.

  • Sony lists passive wired listening for the WH-1000XM6 and up to 30 hours of music playback with Noise Cancelling switched on.
  • ANC reduces current outside noise in suitable conditions, but it won’t process club noise that’s already part of the file.

Joybuy headphones for wireless listening

The following Joybuy products are listed for wireless listening; several models mention Noise Cancelling. ANC can affect current background noise, but not sounds already saved in the interview.

MINISO MG210 wireless over-ear headphones

MINISO MG210 wireless over-ear headphones

For wireless listening; the product title mentions Noise Cancelling, but this won’t remove sounds from the saved recording.

The product title states a battery life of 24 hours.

View on Joybuy
AKG N9 Hybrid over-ear headphones

AKG N9 Hybrid over-ear headphones

For wireless listening or use with the stated 3.5 mm connection; ANC relates to noise where you’re listening, not the interview file.

Features listed include True Adaptive Noise Cancelling, Bluetooth 5.3 with Multipoint and a 3.5 mm connection.

The product title states a battery life of up to 55 hours.

View on Joybuy
CMF Headphone Pro over-ear headphones

CMF Headphone Pro over-ear headphones

For wireless or wired listening; the stated Hybrid ANC feature applies to background noise where you’re listening.

Features listed include Bluetooth 5.4, connection to two devices and replaceable ear pads.

The product title states a battery life of up to 100 hours.

View on Joybuy
JBL Tune 780NC wireless over-ear headphones

JBL Tune 780NC wireless over-ear headphones

For wireless listening in places where outside noise may be distracting; Noise Cancelling doesn’t process sounds in the saved recording.

The product title mentions Active Noise Cancelling and a Multipoint connection.

View on Joybuy
JBL Tune 730BT wireless headphones

JBL Tune 730BT wireless headphones

For wireless listening; the noise cancellation mentioned in the product title doesn’t apply to interference already in the recording.

The product title mentions Noise Cancelling; the description lists Bluetooth Multipoint and soft ear pads.

View on Joybuy

Frequently asked questions

Can ANC remove voices or music from the club recording?

No. The noise cancellation described by Sony analyses background noise around the headphones; it doesn’t process the interview file you’ve already downloaded. It may have a limited effect on changing voices where you’re currently listening.

How do I connect wired studio headphones?

Check the audio output on your device against the plug on the exact model variant. According to the manufacturer, the beyerdynamic DT 770 PRO, 32 Ohm, has a 3.5 mm plug and a 6.35 mm adapter. If your device doesn’t have a suitable output, you’ll need to check for a compatible connection solution.

How can I listen to difficult sections without constantly turning up the volume?

First, check that your headphones fit properly and look for possible sources of noise where you’re listening. Remember to take listening breaks. The World Health Organization recommends well-fitting or noise-reducing headphones to reduce the need to turn up the volume in noisy environments.

What happens if a product develops a fault after purchase?

For consumer purchases in the EU, you’re generally entitled to a statutory minimum guarantee of two years from the date you receive the goods. This is separate from any additional manufacturer’s warranty, so check its specific terms separately.

What should I check for product compliance when buying Bluetooth headphones?

Check the information provided for the wireless model you’re being offered, including its CE marking and details identifying the product and manufacturer. The German Federal Network Agency lists these points as part of its market surveillance; this doesn’t mean that a specific listing has already been checked.