Who can benefit from a remote release?

Collectors with a fixed photography setup

If you regularly photograph both sides of a coin with the camera in the same position, a suitable remote release lets you take the shot without touching the camera body. Nikon Germany describes this touch-free release function for the MC-DC2 on compatible cameras.

Photographers who change the lighting

If you adjust the coin or lighting between shots, compatible wireless control can make it easier to take a photo without holding a cable. Sony notes that the RMT-P1BT only works with cameras specifically listed as compatible.

Collectors unsure about camera compatibility

If you’re not sure which connection your camera has or whether it supports a particular Bluetooth remote, check your exact camera model and the relevant accessories list before buying. Sony and Fujifilm specify compatibility requirements for individual models.

What should you look for when buying?

Criteria What to check before buying Who will find this particularly important?
Connection or wireless mode Check your camera model against the manufacturer’s accessories list; if necessary, check the connection, adapter or Bluetooth compatibility. If I’m not sure whether a release will work with my camera, I want to check the model and connection before buying. For around 36% of consumers, compatibility is the top priority.
Taking shots from a fixed setup Try the self-timer first; if using a cable release, check the connection and how the cable will run across the table. If my camera stays in the same position for front and back shots, I don’t want to move it when taking the picture. Around 29% of consumers prioritise touch-free shooting from a fixed setup.
Freedom of movement Check that your specific remote is supported and can be paired; for wireless kits, also check the camera cable required and what’s included. If I move the lighting or coin around on a small table, I want to take a shot without running a cable across my work surface. For around 21% of consumers, freedom of movement is the main consideration.
Repeated shots Check whether your specific model has an interval function and which camera connection it requires. If I need a programmed sequence rather than individual coin shots, a suitable interval function is essential. Around 14% of consumers prioritise programmed repeat shooting.

Avoid common buying mistakes

  • Buying based on the camera brand alone

    An accessory may require a specific connection or support for a particular camera model. With the Fujifilm RR-100, an additional adapter is also required for certain camera combinations.

    Compare your camera’s full model name with the accessories list and the manufacturer’s connection details.

  • Assuming ‘wireless’ means ‘no camera cable’

    According to Rollei, the Wireless Remote Release Set 28146 requires a cable that matches your camera to connect the receiver to it. By contrast, the Sony RMT-P1BT uses the built-in Bluetooth receiver on compatible models.

    Check the entire connection from the controller to the camera, as well as what’s included with the specific kit.

  • Expecting the remote release alone to produce sharp, well-lit coin photos

    Taking a photo without touching the camera can help prevent movement when you press the shutter. Focus, a stable camera mount and careful lighting are still important for capturing the details and reflections on a coin.

    Set up your camera and lighting securely first, then see whether a different way of taking the shot would make your workflow easier.

Brands to consider

Canon

Canon offers wired and wireless releases, as well as Camera Connect for compatible cameras.

  • Canon specifies an E3 connection for the RS-80E3; Camera Connect can control compatible cameras through a compatible mobile device.
  • The connection, camera compatibility and app features depend on the camera model.

Nikon

The MC-DC2 is a cable option, while the ML-L7 is a Bluetooth remote for compatible Nikon cameras.

  • Nikon describes the MC-DC2 as a way to release the shutter without touching the camera.
  • Check whether the cable release and Bluetooth remote are compatible with your specific model.

Sony

The RMT-P1BT is a Bluetooth remote for Sony cameras specifically listed as compatible.

  • According to Sony, the RMT-P1BT doesn’t need a separate receiver.
  • Sony recommends checking that your camera is compatible, along with its Bluetooth settings and the pairing process.

Fujifilm

The RR-100 is a cable release for the X and GFX camera models listed on Fujifilm’s accessories page.

  • Fujifilm includes an extension cable with an angled plug.
  • Certain specifically listed cameras also require a third-party adapter.

Rollei

The Wireless Remote Release Set 28146 is a wireless option with an interval function.

  • Rollei lists interval control as a feature of this model.
  • According to Rollei, you’ll need a cable selected to match your camera to use it.

Suitable products on Joybuy

Similar products will be available soon.

Frequently asked questions

Do I really need a separate remote release for occasional coin photos?

No, not if the self-timer suits your workflow. Camera Connect can also provide remote control for compatible Canon cameras; check the features available on your specific model.

What should I check if a Bluetooth remote won’t release the shutter?

First, check that your camera model supports the specific remote. For the RMT-P1BT, Sony also recommends checking that Bluetooth is enabled, reviewing the Bluetooth remote control settings and pairing the devices. The menu layout may vary between cameras.

Do I need an additional camera cable for the Rollei Wireless Remote Release 28146?

According to Rollei, you need a cable that matches your camera to use it. Check whether the cable is included with the specific kit and whether it fits your camera’s connection.