Which selection criteria matter to you?

Craft group using special inserts

If you use small formats or heavier paper, check that the paper feed, weight and printable margins are suitable for your design. Kyocera and Canon’s specifications show that the permitted values depend on the feed and the material.

Teacher printing regular batches

If you print the same colourful inserts regularly, consider other model-specific consumables as well as toner. Manufacturer specifications and print-cost calculation methods can help you compare options.

Teaching team sharing a printer

If several people will use the printer, you’ll need suitable network connections and an appropriate place to install it. The German Social Accident Insurance (DGUV) provides guidance on positioning shared printers.

What should you look for when buying?

First check that the specific paper can be fed through the intended paper feed. Then consider print volumes, shared use and the functions you need to narrow down your options.

Criterion What to check before buying Who should pay particular attention?
Paper and size Check that the size, weight, material and intended paper feed are all compatible. Kyocera specifies 60–220 g/m² for the multi-purpose tray on the ECOSYS PA2101cwx; Canon specifies 60–176 g/m², or up to 200 g/m² for coated paper, for the multi-purpose tray on the i-SENSYS LBP673Cdw II. If I use inserts in a special size or on heavier paper, I want to check that the paper is approved for the specific feed. Around 33% of consumers are likely to prioritise paper compatibility.
Ongoing consumable costs Factor in your planned print volume, colour coverage, what’s included in the box, compatible toner and, where relevant, other wear parts. Compare costs using the same calculation method. If I print the same designs regularly, I want to include consumables across my planned print runs. Around 27% of consumers are likely to put ongoing costs first.
Shared use Check whether LAN or Wi-Fi is compatible with your school’s IT setup, where the printer can be placed and whether its ventilation openings would face workspaces. The German Social Accident Insurance recommends placing shared printers in a well-ventilated area. If several teachers will be printing, I need suitable connections and a location that works in the classroom. Around 20% of consumers are likely to prioritise shared use.
Layout and duplex printing Allow for the non-printable margins in your layout and check that duplex printing is supported for your paper size and type. Canon specifies a 5 mm non-printable margin on each side for the i-SENSYS LBP673Cdw II; Kyocera limits duplex printing on the ECOSYS PA2101cwx to 60–120 g/m². If my designs run close to the edge or I want to print inserts on both sides, I want to check the margins and duplex specifications for my paper. Around 20% of consumers are likely to prioritise layout or double-sided printing.

Avoid common buying mistakes

  • Assuming the highest paper weight applies to every type of paper

    Permitted paper weights can vary depending on the feed, coating and whether you’re printing in duplex. Using unsuitable paper can lead to wasted prints.

    Check that the material, size, weight and intended print side match the specifications for the exact model.

  • Comparing only the stated toner yield

    For regular colour print runs, consumable costs also depend on the design and other model-specific consumables. Actual page yields can vary, as Lexmark states for the CS331dw.

    Calculate what you’ll need for a comparable print run, including compatible toner and, where applicable, the drum and other wear parts.

  • Assuming a colour LED model is a colour laser printer without checking

    Brother describes the HL-L3240CDW as a colour LED printer. A product’s listing in a search category doesn’t confirm its printing technology.

    If you specifically need a laser printer, check the technical description of the full model.

  • Choosing a location based only on available desk space

    A shared printer needs a location that works for the way lessons run. The German Social Accident Insurance recommends installing printers in well-ventilated rooms where possible, and not directing airflow towards workspaces.

    Agree on where it will go with your school before settling on a model’s dimensions and connections.

Printer brands to consider

Kyocera

According to Kyocera, the ECOSYS PA2101cwx and ECOSYS MA2101cwfx have a multi-purpose tray that supports paper up to 220 g/m². The multifunction model also scans and copies.

  • The PA2101cwx’s multi-purpose tray is specified for paper weighing 60–220 g/m².
  • Kyocera specifies 60–120 g/m² for automatic duplex printing on the PA2101cwx. Manufacturer claims about cost-effectiveness are not independently verified savings.

Canon

The i-SENSYS LBP673Cdw II is an A4 colour laser printer; the i-SENSYS MF models add scanning and copying to the printing functions.

  • Canon specifies 60–176 g/m², or up to 200 g/m² for coated paper, for the LBP673Cdw II’s multi-purpose tray.
  • The specification of up to 200 g/m² applies to coated paper; it doesn’t mean that every insert material is approved.

HP

The Color LaserJet Pro 3202dw is a colour laser printer; the Color Laser MFP 178nwg adds scanning and copying to printing.

  • HP lists colour printing and automatic two-sided printing for the 3202dw.
  • For the models considered, HP notes that dynamic security measures may block cartridges without a suitable HP chip. This doesn’t tell you whether a particular insert paper is approved.

Lexmark

According to Lexmark, the CS331dw is a colour laser printer with Wi-Fi, Ethernet and integrated duplex printing.

  • Lexmark lists high-yield replacement cartridges.
  • Lexmark notes that actual page yields depend on various factors. The listed features don’t confirm that a particular type of greeting card paper is suitable.

Brother

The HL-L3240CDW may be an alternative if you need toner-based colour printing but don’t specifically require laser technology.

  • Brother lists Wi-Fi, LAN and duplex printing for this model.
  • Brother describes the HL-L3240CDW as a colour LED printer, not a colour laser printer. Check the consumables for the exact model.

Joybuy product selection

The Joybuy model featured here is a colour laser multifunction printer for printing inserts, with additional scanning and copying functions.

HP Color LaserJet Pro MFP 3302sdwg colour laser multifunction printer

HP Color LaserJet Pro MFP 3302sdwg

A good option if you’d like to scan or copy templates as well as print inserts.

Colour laser printer with automatic two-sided printing, touchscreen, Wi-Fi, Ethernet and USB.

The product title doesn’t confirm that the printer is suitable for a particular insert paper. Check the size, weight and material specifications for the intended feed.

View at Joybuy

Frequently asked questions

Can I automatically print on both sides of heavier paper?

The maximum paper weight alone doesn’t tell you. Kyocera specifies 60–220 g/m² for the ECOSYS PA2101cwx’s multi-purpose tray, but only 60–120 g/m² for its duplex unit. Check the size, material, feed and duplex specifications together for the model you choose.

How can I stop designs being cut off on small inserts?

Set the actual paper size in the print job and allow for the non-printable margin. Canon specifies a 5 mm non-printable margin on each side for the i-SENSYS LBP673Cdw II; this figure applies to that model and isn’t a general margin recommendation.

What should I bear in mind when positioning the printer and changing the toner?

The German Social Accident Insurance recommends not directing airflow from ventilation openings towards workspaces, and placing shared printers in well-ventilated rooms where possible. Wipe up spilled toner with a damp cloth rather than blowing it away. These are safe-handling recommendations, not a general requirement to use a separate room.

Is there anything else to check when buying replacement toner, apart from the price?

Yes. Check exact model compatibility, the cartridge type and, where applicable, separate wear parts. For the devices considered, HP notes that dynamic security measures may block cartridges without a suitable HP chip; this restriction doesn’t automatically apply to other brands.

Is the Blue Angel ecolabel required for a classroom printer?

The information from the German Environment Agency doesn’t establish a general requirement to buy a certified printer. The agency recommends the ecolabel as a guide to choosing low-emission devices, and reported on 19 June 2026 that the criteria for office equipment with printing functions had been revised. Check the certification for the specific model and the applicable set of criteria.

Can I return an old printer in Germany when buying a new one?

Under § 17 of the German Electrical and Electronic Equipment Act (ElektroG), retailers covered by the provision must take back an old appliance free of charge when you buy a new one, provided it is of the same appliance type and has essentially the same functions. Check the return process with the retailer; the legal requirement isn’t a guarantee from any particular seller.