Who are colour laser printers for collages suitable for?

Collage enthusiasts with a small desk

If your templates are already digital, you can focus on printing and check that the printer and paper handling will fit your workspace. Canon gives the i-SENSYS LBP647Cdw dimensions of around 425 × 418 × 265 mm with its trays retracted; Lexmark lists the CS331dw as 411.2 mm wide and 394.1 mm deep.

Crafters using speciality paper

If you want to use thicker or coated sheets, check the paper type, size and weight against the specifications for the feed you intend to use. Kyocera gives different specifications for the multipurpose tray and cassette on the ECOSYS PA2101cwx; Canon explicitly states a higher weight limit for coated paper on the LBP647Cdw.

Designers working with fine details

Print quality and the printable area matter when working with fine lines or designs close to the cut edge. F.A.Z. Kaufkompass gave the Canon LBP633Cdw positive marks for features including lines and solid colour areas. That test result applies to the model tested and does not demonstrate how a different printer or paper will perform.

What should you look for when buying?

First check the space available and the room you’ll need to operate the printer, then check that the paper is approved for the feed you plan to use. Finally, decide whether print quality, running costs or an additional scanner matters most for your workflow.

What matters What to check before buying Who it matters most to
Space and room to operate Check the width, depth and height of the specific model, as well as the space needed to load and remove sheets. If you’re printing digital templates and desk space is limited, you’ll need to consider both the printer’s dimensions and access to the paper feed and output tray. Around 27% of consumers are likely to prioritise the space it takes up.
Suitability for collage paper Check that the paper is suitable for laser printing, and verify its type, size and weight in g/m² against the specifications for the feed you want to use. If you plan to use particular thicker or coated sheets, you’ll need approval for that exact material and the feed you intend to use. Around 27% of consumers are likely to place particular importance on paper compatibility.
Fine details and cut edges Print a test of your own design on approved paper and keep cut lines within the printable area. If you’re cutting out fine lines or elements close to the edge, their appearance and the printable area are important. Around 20% of consumers are likely to prioritise the design and margins in particular.
Cost of repeated colour printing Compare compatible colour toner and other consumables over the same planned period of use. If you make repeated changes to designs and print areas of solid colour, factor toner and paper into your ongoing budget. Around 13% of consumers are likely to focus on running costs in particular.
Digitising paper originals If you genuinely need to scan, look for a scanner and, if necessary, a model that explicitly supports duplex scanning. If you regularly want to digitise paper designs, a scanner can complement your workflow, but it also takes up space. Around 13% of consumers are likely to put scanning needs first.

Common buying mistakes when choosing a printer for collage paper

  • Assuming paper weight guarantees compatibility

    A suitable g/m² rating alone doesn’t mean that every coating or size is approved for every paper feed. Kyocera specifies different weight ranges for the multipurpose tray and cassette on the ECOSYS PA2101cwx; Canon’s stated limit of up to 200 g/m² for the LBP647Cdw applies specifically to coated paper.

    Before buying, check that the paper is designed for laser printing and that its material, size and weight are suitable for the feed you intend to use.

  • Measuring only the printer itself

    The manufacturer’s dimensions describe the printer, but don’t necessarily account for the space you’ll need to load, remove and collect sheets.

    Allow for the paper feed and output tray in the space where you plan to put the printer, and choose scanning or copying functions only if you’ll actually use them.

  • Treating an older test result as a current buying recommendation

    F.A.Z. Kaufkompass tested the Canon LBP633Cdw, but Canon’s German shop now lists this model as no longer available. The test result from that time can’t be applied to a different model.

    Consider the test result and the model’s current availability separately, and don’t assume a successor model is equivalent to the one tested without evidence.

  • Assuming the stated toner yield reflects your own printing costs

    Lexmark says actual page yield can depend on printing conditions. HP notes that the Color LaserJet Pro 3202dw has dynamic cartridge security, which may block certain cartridges using non-HP chips.

    Check which replacement cartridges are compatible with the exact model, and compare consumables based on how much you plan to print.

Brands to consider

Canon

The i-SENSYS range includes A4 colour laser printers and all-in-one models. The LBP647Cdw provides a reference for printer dimensions and paper limits.

  • Canon gives the LBP647Cdw dimensions of around 425 × 418 × 265 mm with its trays retracted.
  • Canon’s higher limit of up to 200 g/m² applies to coated paper; it isn’t blanket approval for any sheet.

Lexmark

The CS331dw is a colour laser printer with no verified scanning function here, and can serve as a guide to dimensions for a compact workspace.

  • Lexmark lists the CS331dw as 411.2 mm wide and 394.1 mm deep, with Wi-Fi and duplex printing.
  • Lexmark says actual cartridge yield depends on printing conditions.

Kyocera

The ECOSYS PA2101cwx is a colour printing option with different paper limits for each feed.

  • Kyocera lists a weight range of 60–220 g/m² for the multipurpose tray and 60–163 g/m² for the cassette.
  • The manufacturer gives the printer’s dimensions as 410 × 410 × 329 mm; you’ll also need to make sure there’s room to access the multipurpose tray.

HP

The Color LaserJet Pro 3202dw is a colour laser printer for printing only; the brand also offers all-in-one models.

  • HP lists Wi-Fi and duplex printing for the 3202dw.
  • HP notes that this model has dynamic cartridge security, which may block certain cartridges with chips from other manufacturers.

Joybuy products

Similar products will be available soon.

Frequently asked questions

Can I use ordinary inkjet photo paper in a colour laser printer?

Not just because the size and paper weight are right. Check that the paper is specifically designed for laser printing and approved for the paper type, weight, size and feed of your particular printer. Canon explains that toner is fixed using heat; approval for coated paper applies only under the conditions specified for the relevant model.

Do I need a scanner for digital collage templates?

If you’re only printing templates that are already digital, you don’t need a scanner for that. To scan paper originals, however, you’ll need a separate scanner or an all-in-one printer; HP explicitly describes the Color LaserJet Pro 3202dw as a model without scanning or copying functions.

How should I budget for toner and ongoing printing costs?

Compare compatible colour toner and other consumables for the same planned print volume. Lexmark notes that actual page yield depends on printing conditions; HP says the Color LaserJet Pro 3202dw may restrict the use of certain cartridges with chips from other manufacturers.

Can I print other people’s images for private collages and give the copies to others?

Section 53 of the German Copyright Act (UrhG) allows individuals, subject to the conditions set out there, to make individual copies for private use, particularly where this is not for commercial purposes and the source is not obviously unlawful. The Federal Ministry of Justice and the Federal Office of Justice also state that, as a rule, these copies must not be distributed or made available to the public. Making a private copy and giving it to someone else or selling it are therefore not legally equivalent.

Should colour laser printers always be kept out of the home office?

The German Environment Agency’s guidance does not create a general legal requirement to keep every desktop printer elsewhere. The Agency recommends the Blue Angel ecolabel as a guide to low-emission laser printers and has long advised, as a precaution, that high-volume printers be placed in separate rooms.