What to consider when buying
Choose the paper size and type first, then check which feed is designed to handle it. If your inserts are double-sided, include print margins and duplex compatibility in the same check. For a one-off project, a single print job could be an alternative to buying your own printer.
| What to consider |
What to look for |
Who it matters most to |
| Paper for your inserts |
Check the size, type and weight against the manufacturer’s specifications for the exact feed you plan to use. |
If I’ve already chosen my paper, I want to make sure it can be handled by the right feed. Around 36% of consumers put paper compatibility first. |
| Print margins and the reverse side |
Check the printable margins and duplex limits for your specific paper size and weight. |
For a two-sided design, I want to position it so that nothing falls outside the printable area. Around 29% of consumers prioritise print quality and the reverse side. |
| Printer and consumables |
Consider how else you plan to use the printer, as well as the toner and any separately listed units for the exact model. |
If I’m only printing for this project, I want to compare the cost of a single print job with buying my own printer and consumables. Around 21% of consumers consider this their top priority. |
| Sharing the printer |
Only consider Wi-Fi or LAN, a scanner and an automatic document feeder if you actually need them. |
If several people will be printing or you need to scan documents, I want to check that the printer has the features we need. Around 14% of consumers prioritise sharing and document handling. |
Joybuy products
Suitable products will be available soon.
Frequently asked questions
Can I automatically print on both sides of thick insert paper?
Not just because the feed has a high paper-weight limit. Kyocera Document Solutions Germany specifies 60–220 g/m² for the ECOSYS PA2101cwx’s multi-purpose tray, but 60–120 g/m² for its automatic duplex unit on A4 and A5 paper. Check the separate limits for your specific printer and paper.
How can I stop designs from being cut off at the edge of the card?
Keep your design within the printable area and print a test insert first. Canon Germany specifies a 5 mm non-printable margin at the top, bottom, left and right of the i-SENSYS LBP633Cdw. This figure does not apply to other printers as a rule.
Which consumables should I factor in when choosing a printer?
Check the toner and any separately listed units for the exact model. Brother Germany lists a drum unit, transfer unit and waste toner box among the consumables for the MFC-L3760CDW. HP also specifies cartridge chip requirements for the Color LaserJet Pro MFP 4302dw.
How do I dispose of an old printer in Germany?
An old printer is waste electrical and electronic equipment, so it must not go in your household rubbish. Germany’s Federal Environment Ministry explains how to return electrical and electronic equipment. Check with your local collection point or the relevant supplier for the options available to you.
What does the Blue Angel label tell me when choosing a laser printer?
The German Environment Agency recommends the Blue Angel as a guide when choosing a low-emission laser printer. Check whether the label applies to the specific model you’re considering.