Which printer is right for you?

Inserts on heavier paper

If you want to use a particular card or heavier paper, check its size, weight and finish against the paper path you plan to use.

Printing at a small desk

You want colour printing without unnecessary extra features, and need enough room not just for the printer but also to load paper and collect your printouts.

Designers working with fine text and colour

If small text, lines and blocks of colour matter, check the print quality using your own design and the paper you actually intend to use.

What should you look for when buying?

First, check that your specific paper is suitable for the feed path you plan to use. Then consider the space available for operating the printer, the printable area and the consumables.

What matters What to check before buying Who it matters most to
Paper and feed path Check the size, weight and type of paper approved for the specific feed path you intend to use. For the Kyocera ECOSYS PA2101cwx, the multipurpose feeder supports 60–220 g/m², but automatic duplex printing supports only 60–120 g/m². Avery Zweckform recommends using the single-sheet feeder and selecting the thick paper setting for its compatible heavier laser papers. If you want to use a particular heavier insert, make sure it is suitable for that specific paper path. Around 31% of consumers are likely to prioritise paper and the feed path.
Space for the printer and operating it Compare the printer’s dimensions with your desk, and allow extra room for the paper trays, output and operation. Canon gives the LBP646Cdw’s dimensions as approximately 425 × 418 × 265 mm with the trays retracted; Kyocera lists the PA2101cwx at 410 × 410 × 329 mm. These dimensions do not include all the space needed to use the printer. On a small desk, you’ll need enough room beyond the printer itself to handle paper and printouts. Around 25% of consumers are likely to prioritise space and easy access.
Print quality and printable area Where possible, test your design on the paper you plan to use. Canon specifies a 5 mm non-printable margin on each side for the LBP646Cdw. The print quality assessment of the LBP633Cdw by F.A.Z. Kaufkompass is not evidence of the performance of another model. If you’re printing fine text, lines and blocks of colour, you’ll want to see how your own design looks on your chosen paper. Around 25% of consumers are likely to prioritise print quality.
Toner and maintenance Check what’s included, which replacement toner is compatible and what other consumables you’ll need for the exact model. For the HL-L3240CDW, Brother lists the drum, transfer unit and waste toner box as well as toner. HP notes that cartridges with chips from other manufacturers may be subject to restrictions on the Color LaserJet Pro 3202dw. If you print colour inserts regularly, replacement parts and cartridge choice will matter too. Around 19% of consumers are likely to prioritise ongoing costs and maintenance.

Which buying mistakes should you avoid?

  • The highest paper weight isn’t automatically supported by every feed path

    The Kyocera ECOSYS PA2101cwx has different paper weight limits for its multipurpose feeder, cassette and automatic duplex unit. A sheet that can be fed through the multipurpose feeder is not automatically approved for double-sided printing.

    Check your paper’s size, weight and finish against the specific feed path. With heavier paper, you may need to print on one side only or turn the sheet over manually.

    Using an unsuitable feed path may mean extra work loading and turning the paper.

  • A compact printer doesn’t automatically mean there’s enough room on your desk

    Canon gives the LBP646Cdw’s dimensions with the trays retracted. You’ll also need room to load and collect paper when using it day to day.

    Measure the available space and check how far the trays and paper output will extend in the position you have in mind.

  • A test result doesn’t necessarily apply to a different model number

    F.A.Z. Kaufkompass tested the Canon LBP633Cdw, which Canon Germany lists as discontinued. Its verdict does not confirm that another model offers the same print quality or that it is available.

    Check the model number and specific product details, and don’t treat older test results as an assessment of a newer model.

  • Toner isn’t always the only consumable

    For the HL-L3240CDW, Brother lists the drum, transfer unit and waste toner box as consumables as well as toner. HP notes that cartridges with chips from other manufacturers may be subject to restrictions on the Color LaserJet Pro 3202dw.

    Before you decide, check which consumables the specific model needs and read the guidance on cartridge compatibility.

    Extra consumables and a more limited choice of cartridges can affect the cost of running the printer.

Key brands at a glance

Canon

The i-SENSYS LBP646Cdw is a single-function colour laser printer for A4 and supported smaller sizes.

  • Canon lists a single-sheet feeder and custom sizes from 76,2 × 127 mm.
  • The specification of up to 200 g/m² applies to coated paper, so check that this matches your insert. Canon Germany lists the older LBP633Cdw as discontinued.

Kyocera

The ECOSYS PA2101cwx is a colour laser model with a separate multipurpose feeder for paper approved for that feed path.

  • Kyocera specifies 60–220 g/m² for the multipurpose feeder.
  • The cassette supports up to 163 g/m², while automatic duplex printing supports up to 120 g/m². These differences matter when using heavier inserts.

HP

The Color LaserJet Pro 3202dw is a single-function colour laser printer with colour and duplex printing.

  • HP specifies colour and duplex printing for this model.
  • HP notes that cartridges with chips from other manufacturers may be subject to restrictions. Check the guidance if you plan to use these cartridges.

Lexmark

The CS331dw is a colour laser model whose dimensions and recommended monthly print volume may be useful when planning your set-up.

  • Lexmark lists a width of 411,2 mm, a depth of 394,1 mm and a height of 243,7 mm, as well as a recommended monthly volume of 600–2.500 pages.
  • These specifications do not confirm that the printer is suitable for card or very occasional card printing. Check that your specific paper is approved.

Brother

The HL-L3240CDW is an alternative colour LED option if toner-based colour printing matters more to you than the specific laser technology requested.

  • Brother lists Wi-Fi and LAN, as well as duplex printing.
  • Brother describes this as a colour LED printer. The drum, transfer unit and waste toner box are listed as consumables alongside toner; also check that your insert is approved for use.

Suitable products at Joybuy

Suitable products coming soon.

Frequently asked questions

Can I print heavier inserts on both sides automatically?

Not just because the printer has a ‘duplex’ feature. The Kyocera PA2101cwx supports 60–220 g/m² in its multipurpose feeder, but only 60–120 g/m² in its automatic duplex unit. Also check the size and type of your insert paper.

How should I prepare laser paper for greeting card inserts?

Check that the paper is suitable for laser printing and that your printer approves its use. For its compatible heavier laser papers, Avery Zweckform recommends selecting the card or thick paper setting and using the single-sheet feeder. This recommendation does not replace the printer’s own specifications.

What extra costs should I expect after buying?

For the specific model, compare what’s included with the cost of compatible replacement toner and other consumables. For the HL-L3240CDW, Brother lists the drum, transfer unit and waste toner box as well as toner. The cost per insert will depend, among other things, on the print run and design.

Where can I return an old printer in Germany?

The stiftung ear explains that covered retailers must offer free one-for-one take-back when you buy a new device, provided the old device being returned is of the same type and performs essentially the same functions. The obligation depends, among other things, on the type and size of the retailer, so ask the retailer about its returns options.

Is the Blue Angel eco-label a legal requirement for printers?

The information cited from the German Environment Agency describes the Blue Angel as a guide to choosing low-emission printers, not as a general legal requirement when buying one. In June 2026, the Agency reported revised criteria for office equipment with printing functions, so check which criteria apply to the specific model.