Who is this guide for?

Invitation makers using card stock

If you’ve already settled on a size and type of paper, check whether that specific stock will work with the feed you want to use and, if necessary, the duplex unit. Kyocera and Canon provide model-specific details for different paper paths.

Hobbyists who love illustration

When your design includes fine lines, small text and blocks of colour, what matters is how it looks on the paper you’ll actually use. A review verdict applies only to the model tested: F.A.Z. Kaufkompass reviewed the Canon i-SENSYS LBP633Cdw, not the LBP646Cdw.

Hobbyists printing invitations regularly

If you’re printing invitations repeatedly, consider the paper feed and consumables alongside the space you have available. The German Environment Agency recommends choosing low-emission printers and explains that regular ventilation can help improve indoor air quality.

What should you look for when buying?

First, check that your card stock is compatible with the paper path and duplex printing. Then weigh up print margins, a proof print, consumables and available space, based on how many invitations you plan to print.

What to consider What to look for Who it matters to most
Card size and paper path Check the size, coating and weight against the feed you’ll actually use; compare duplex limits separately. If I’m using card stock, I want to know whether it can be fed through and, if needed, printed on both sides. Around 36% of consumers say the paper path is their top priority.
Illustrations, text and margins Allow for the unprintable margins in your layout and, if possible, proof-print your design on suitable paper. If I want fine lines, small text and blocks of colour to look right on the finished invitation, I need a representative proof print. Around 29% of consumers say print quality is their top priority.
Toner for repeat print runs Check consumable compatibility and page-yield information for the specific model and your own design. If I print invitations often, I want to consider consumables alongside the size of each print run. Around 21% of consumers put ongoing costs first.
Space in your craft room Measure the space available and make sure the paper feed is easy to access; also consider where you’ll place the printer and how well the room is ventilated. If the printer needs to fit in my craft room and be easy to access, space and placement are key. Around 14% of consumers say using the printer in a craft room is their top priority.

Common pitfalls when printing invitations

  • Assuming the highest stated paper weight applies to every paper path

    Kyocera lists different specifications for the multipurpose tray, paper cassette and automatic duplex printing on the ECOSYS PA2101cwx.

    Before buying, check your card size and weight against the specific feed, then check the duplex specifications separately.

    If the card isn’t suitable for automatic double-sided printing, you may need to turn it over and feed it through manually.

  • Planning a full-bleed design without checking first

    Canon specifies a 5 mm unprintable margin on each side for the i-SENSYS LBP646Cdw. A layout that extends to the edge of the card may therefore need adjusting.

    Allow for the unprintable area in your layout and print a test before producing several invitations.

    For designs that run close to the edge, you may need to adjust the layout or trim the card after printing.

  • Overlooking consumables and actual page yield

    Lexmark notes that actual cartridge yield depends on several factors. For the Color Laser MFP 178nwg, HP lists restrictions on cartridges without an HP chip.

    Check the consumable requirements for the specific model and take your design and planned print run into account.

Key brands at a glance

Kyocera

The ECOSYS PA2101cwx is worth considering if the paper path is important for trimmed or heavier cards.

  • Kyocera specifies 60–220 g/m² for the multipurpose tray; automatic duplex printing supports 60–120 g/m² for A4/A5.
  • The paper-path specifications don’t show how a particular illustration will look on your chosen card stock.

Canon

You can assess the i-SENSYS LBP646Cdw by checking its print margins and its separate paper and duplex specifications.

  • Canon specifies an unprintable margin of 5 mm on each side for this model.
  • Canon lists 60–163 g/m² for the cassette; coated paper is supported up to 200 g/m². Duplex paper sizes are listed separately. A review verdict for the LBP633Cdw doesn’t apply to the LBP646Cdw.

HP

The Color Laser MFP 178nwg combines colour printing with scanning and copying, which could be useful if you also want to work with paper originals in your craft room.

  • HP specifies print speeds of up to 4 colour pages per minute for the 178nwg.
  • HP notes that dynamic security measures on this model may block cartridges using a non-HP chip.

Lexmark

The CS431dw is a useful comparison for connected colour printing and repeat print runs.

  • Lexmark lists Wi-Fi, Gigabit Ethernet and built-in duplex printing.
  • Lexmark says actual cartridge yield depends on several factors. Check that your specific card stock is compatible.

Joybuy products for invitations

Matching products coming soon.

Frequently asked questions

Can I automatically print on both sides of a heavy invitation card?

Not just because the paper feed supports that weight. For the Kyocera ECOSYS PA2101cwx, Kyocera specifies 60–220 g/m² for the multipurpose tray, but 60–120 g/m² and A4/A5 for automatic duplex printing. Check the paper type, size and weight against the specifications for the model you’re considering.

How can I design an invitation close to the edge of the paper?

Keep your design within the printable area and check it with a test print. Canon specifies an unprintable margin of 5 mm on each side for the i-SENSYS LBP646Cdw. This applies to that model only and isn’t a general limit for colour laser printers.

What should I consider when placing a printer in my craft room?

Measure the space available and check that the paper feed will remain easy to access. The German Environment Agency recommends choosing low-emission devices and explains that regular ventilation can help improve indoor air quality. This doesn’t support a general claim about the health effects of any particular model.

Can I simply print other people’s illustrations on invitations?

Check the usage rights for the specific design and how you intend to use it. The German Patent and Trade Mark Office explains that drawings may be protected by copyright and that usage rights can be granted through licence agreements. You can’t assume from this alone that any particular design is free to use.