When choosing a colour laser printer for illustrated invitations, first check that your exact card size and paper weight are approved for the feed you plan to use. Then check the print margins and how much space the printer needs. A colour laser isn’t automatically the right choice for designs that go right to the edge or feature delicate photographic gradients: Canon specifies an unprintable margin of around 5 mm on all sides for the i-SENSYS LBP646Cdw, while a photo inkjet printer may be an alternative worth considering separately.
Who should consider this?
Designers with a specific card stock in mind
If you’ve already chosen the size and paper, check both against the specifications for the exact feed you plan to use. Paper limits can vary between the cassette, single-sheet feed and duplex printing, as Canon and Kyocera point out in their technical specifications.
Illustrated invitations
For fine lines, blocks of colour or designs close to the edge, the printable area and the result on your own paper are what matter. Canon specifies a 5 mm unprintable margin on each side for the i-SENSYS LBP646Cdw.
Anyone short on desk space
Allow room not only for the printer itself, but also for loading and removing cards. The dimensions of the Lexmark CS331dw and Kyocera ECOSYS PA2101cwx give you a starting point, but they don’t tell you on their own how easy it will be to access the feed in your chosen location.
What should you look for when buying?
Colour laser printer
A good fit if: Your priority is text, lines and blocks of colour, and the printer explicitly supports your card stock.
Things to consider: Print margins and paper compatibility can limit your layout; approval for one feed doesn’t automatically apply to duplex printing.
Photo inkjet printer
A good fit if: Your design mainly features photos or subtle colour gradients, or you specifically need borderless photo printing. Epson describes photo inkjet printers as suitable for fine gradations in tone.
Things to consider: A different printing technology doesn’t guarantee that every type of card stock or cut will work with your chosen printer.
| What matters when buying |
What to check |
Who should consider this? |
| Card stock and size |
Check the size, coating and weight against the specifications for the same feed. Canon specifies 60–163 g/m² for the i-SENSYS LBP646Cdw cassette; support for up to 200 g/m² applies only to coated paper. |
If you’ve already chosen your card stock, it needs to fit the intended tray so you don’t have to change the size. Around 28% of consumers are likely to put paper and size first. |
| Illustration and print margins |
Allow for the exact model’s print margins in your layout and, if possible, test the design on the paper you intend to use. Canon specifies an unprintable margin of around 5 mm on all sides for the i-SENSYS LBP646Cdw. |
If lines, blocks of colour or details near the edge define the look of your invitation, you’ll want to know exactly which areas can be printed. Around 22% of consumers are likely to put the design first. |
| Printer footprint and operating space |
Consider the printer’s width and depth, as well as access to the paper feed and output tray in your chosen location. Lexmark specifies a width of 411,2 mm and depth of 394,1 mm for the CS331dw; Kyocera gives dimensions of 410 × 410 mm for the ECOSYS PA2101cwx. |
If desk space is limited, you’ll need room not just for the printer itself, but also to load and remove the cards. Around 22% of consumers are likely to put available space first. |
| Toner and future print runs |
Check what’s included, which toners are compatible and what other consumables are needed for the exact model. HP notes that cartridges with chips or circuitry from other suppliers may be restricted for the Color LaserJet Pro 3202dw. |
If you’re planning several invitation print runs, you’ll want to know which consumables you’ll need for your model. Around 17% of consumers are likely to prioritise being able to plan for toner and future print runs. |
| Duplex printing and connectivity |
Check duplex support separately for your card size and paper weight, and make sure the available connections work with your devices. For automatic duplex printing on the ECOSYS PA2101cwx, Kyocera specifies A4/A5 and 60–120 g/m². |
If your invitations need printing on both sides or will be accessed by multiple devices, you’ll need a suitable way to print on that specific paper. Around 11% of consumers are likely to prioritise duplex printing or connectivity. |
Common misconceptions
-
‘Postcards’ doesn’t mean every heavyweight invitation paper is suitable
The permitted paper weight can vary depending on the feed and coating. A general media specification therefore doesn’t automatically confirm that your particular paper will work.
Check the size, weight and coating against the specifications for the feed you actually plan to use. Check duplex support separately.
Using unsuitable paper can lead to a poor purchase and failed print attempts.
-
A colour laser printer won’t necessarily print right to the edge of the paper
According to Canon, the i-SENSYS LBP646Cdw leaves 5 mm unprinted on each side. Borderless photo printing on another printer doesn’t mean a colour laser can do the same.
Set your finished size and required bleed before choosing a printer, then design within its printable area.
A wider margin may mean adapting your layout or using a different printing method.
-
Comparing only the printer leaves consumables out of the picture
Depending on the model, you’ll need different toners and other consumables for ongoing use. HP also notes that the Color LaserJet Pro 3202dw has dynamic cartridge security.
Check what’s included, which replacement toners are suitable and what other parts you’ll need, using the full model name. Don’t treat stated page yields as a guaranteed number of colour invitations.
Key brands at a glance
Canon
The i-SENSYS colour laser models include specific information on media and print margins.
- For the LBP646Cdw, Canon specifies postcard support, a manual single-sheet feed and a 5 mm unprintable margin on each side.
- A positive review from F.A.Z. Kaufkompass of the fine lines and blocks of colour applies to the older LBP633Cdw and shouldn’t be taken as evidence of the LBP646Cdw’s performance. Canon lists the LBP633Cdw as discontinued.
Kyocera
Check the ECOSYS PA2101cwx against the paper limits for its different feeds.
- Kyocera specifies 60–220 g/m² for the multi-purpose feeder.
- The manufacturer specifies a maximum of 163 g/m² for the cassette and 60–120 g/m² for automatic duplex printing. The printer measures 410 × 410 × 329 mm.
Lexmark
The CS331dw’s specific dimensions give you a starting point for planning where to put it.
- Lexmark specifies a width of 411,2 mm and depth of 394,1 mm, as well as Wi-Fi and built-in duplex printing.
- These dimensions don’t confirm that your card stock is supported or that there’ll be enough room to use the printer where you plan to put it. According to the manufacturer, toner yields can vary depending on printing conditions.
HP
The Color LaserJet Pro 3202dw is a colour laser printer without scanning or copying functions.
- HP specifies wireless and two-sided printing.
- HP warns that cartridges with chips or circuitry from other suppliers may be restricted on this model. Check whether your card stock is suitable against the printer’s full specifications.
Brother
The HL-L3240CDW is an additional option only if you’re also considering a colour LED printer.
- Brother specifies Wi-Fi/LAN and duplex printing.
- Brother describes this as a colour LED printer, not a colour laser model. Check separately whether your chosen card stock is suitable for this printer.
Joybuy products
Related products coming soon.
Frequently asked questions
Can I print an invitation with an illustration that goes right to the edge on the Canon i-SENSYS LBP646Cdw?
Not borderlessly, according to the published specifications: Canon specifies an unprintable margin of around 5 mm on all sides. Keep your design within the printable area or look into an alternative printing method that is explicitly suitable.
Can I put inkjet photo paper for invitations into an HP laser printer?
No. HP warns that inkjet photo paper can damage a laser printer. Only use paper that’s suitable for the printing technology and the specific printer.
Can I automatically print on both sides of heavyweight invitation paper?
That depends on the model, paper size and weight. For automatic duplex printing on the Kyocera ECOSYS PA2101cwx, the manufacturer specifies A4/A5 and 60–120 g/m², even though the multi-purpose feeder supports heavier paper.
What should I check about toner and consumables before printing more invitations?
For the full model name, check what’s included, which replacement toners are suitable and what other consumables you’ll need. HP also specifically notes that the Color LaserJet Pro 3202dw has dynamic cartridge security.