For a finished voice recording mixed on a computer, a mixer with a documented USB recording path for the main mix will do. If you want to edit voices individually later, separate USB channels must be documented. For recording without a computer running, you’ll also need a clearly specified card recorder. Count how many microphones you’ll need to use at the same time, and check how the mixer connects to the hall’s sound system.
Which recording option is right for you?
Volunteers making simple recordings in a hall
If you set the levels for announcements during an event and want to record the finished mix on a computer, straightforward controls and a clear signal path to the hall’s sound system are important. Yamaha documents USB audio for the MG10XU; Behringer describes how the XENYX QX1204USB sends the main mix to a computer.
Teams with several speakers
If you use several microphones at the same time and want to edit voices individually later, the number of microphone inputs needs to match the number of channels you can record separately. Allen & Heath specifies a 4-in/4-out USB interface for the ZEDi-10; PreSonus describes recording individual channels over USB with the StudioLive AR8c.
Recording without a computer in the hall
If you want to record directly to a memory card on the mixer, check whether it saves the main mix or individual tracks. Zoom Deutschland describes recording individual tracks to SD with the LiveTrak L-8; according to PreSonus, the StudioLive AR8c records the main mix to SD.
What should you look for when buying?
First decide whether a main mix set up on site will be enough, or whether you want to edit individual voices afterwards. Then check whether you’ll be recording on a computer or directly to a card, and how the microphones and hall sound system will connect.
| Priority |
What to check when buying |
Who is this most important for? |
| Simple recording and sound reinforcement |
Check the USB recording source, headphone output, main outputs and connection to the existing hall sound system. |
If I set up a finished voice mix on site and want to record it on a computer, a clear signal path to the sound system matters to me. Around 33% of consumers put this simple recording and sound reinforcement setup first. |
| Edit voices separately later |
Match the number of microphones you need to use at the same time with the documented USB recording channels and their routing. |
If I want to edit several voices independently later, I need more than a recording of the signal that’s already been mixed. Around 27% of consumers prioritise being able to edit voices separately. |
| Recording without a computer |
Check whether the exact model records to a card and whether it saves the main mix or individual tracks. |
If I don’t want to have a computer running in the hall to record, a card recorder is essential for me. Around 20% of consumers prioritise recording without a computer running. |
| Connecting to the hall sound system |
Check the microphone types, number of inputs needed at the same time, main outputs and monitor path against the hall’s sound system. |
If I need to connect several microphones to the existing sound system, suitable connections and the ability to monitor the signal are my priorities. Around 20% of consumers prioritise integration with and monitoring in the hall. |
Common buying misconceptions
-
Assuming mixer channels mean separate USB tracks
Having several microphone inputs doesn’t automatically mean each microphone is sent to the computer on its own channel. With a main-mix recording only, you can’t adjust the balance between voices independently afterwards.
Check the USB recording channels and routing for the exact model, not just the number of inputs.
If you need separate voice tracks, you may need an additional recording device or have to record again if the mixer doesn’t offer the right recording path.
-
Assuming SD recording means you get separate tracks
The type of track saved depends on the model: according to PreSonus, the StudioLive AR8c records the main mix using its SD function, while Zoom says the LiveTrak L-8 saves individual tracks to SD.
Compare card and USB recording separately, and check which signals each model saves using each method.
-
Choosing a similarly named model without checking
According to Allen & Heath, the ZED-10 and ZEDi-10 have different USB interfaces, so their model names don’t mean they offer the same recording options.
Before buying, check the full model name, interface and intended recording method.
Key brands to consider
Yamaha
The MG range includes USB-equipped XU mixers for recording the mix on a computer.
- Yamaha Deutschland lists four mono mic/line inputs for the MG10XU and documents USB audio.
- The number of mixer inputs doesn’t confirm that there are four separate USB recording tracks; nor does it confirm that the mixer can record to a card.
Behringer
The XENYX QX1204USB is an example of a mixer for several speakers that sends the main mix to a computer.
- Behringer lists four XLR microphone inputs, headphone monitoring and a switchable monitor path.
- According to Behringer, USB sends the main mix; this doesn’t confirm that each microphone has its own USB track.
Allen & Heath
The ZEDi-10 is worth considering if you want to send several signals over USB to a recording computer.
- The manufacturer’s datasheet lists a 4-in/4-out USB interface and XLR main outputs.
- According to Allen & Heath, the similarly named ZED-10 has a different USB interface, so check the exact model.
PreSonus
According to the manufacturer, the StudioLive AR8c combines analogue controls, USB recording and a stereo SD recorder.
- PreSonus lists four microphone inputs, as well as USB recording of individual channels and the main mix.
- The main mix is saved to SD; each input isn’t saved as a separate track on the card.
Zoom
The LiveTrak L-8 is an option if recording separate tracks directly to an SD card is important to you.
- Zoom Deutschland describes individual SD tracks, six preamps and four headphone outputs.
- Extra features may be unnecessary for a single short announcement; check the accessories and connections you’ll need for your particular hall.
Suitable products on Joybuy
Related products will be available soon.
Frequently asked questions
How can I record voices individually rather than as a finished mix?
Choose a model with documented separate USB recording channels and routing. According to the manufacturer’s datasheet, the Allen & Heath ZEDi-10 has a 4-in/4-out USB interface. Also check that the number of channels and their assignments suit the microphones you’ll use at the same time.
Can I record to a memory card without a computer?
It depends on the exact mixer. PreSonus lists SD or SDHC recording up to 32 GB for the StudioLive AR8c, which saves the main mix; Zoom describes individual SD tracks on the LiveTrak L-8. Check which memory card is compatible and make a test recording before the event.
How can I make sure the announcement is included in the recording?
Check which signal the USB or card recorder captures on the exact model, and test it with all the microphones you’ll use before you start. According to Behringer, the QX1204USB sends the main mix to the computer over USB; PreSonus notes that if the master fader is lowered on the StudioLive AR8c, the SD recording will have no sound.
Can I record and publish spoken introductions in Germany?
There’s no blanket answer. Section 201 of the German Criminal Code (StGB) concerns the unauthorised recording of another person’s words spoken in private; whether it applies to a particular event depends on the circumstances. If voices can be linked to individuals, the processing must also have an applicable legal basis under data protection law. The Federal Commissioner for Data Protection and Freedom of Information lists consent as one possible basis, but not the only one. Check the recording and any later publication separately for each intended purpose.