Which solution is right for you?

Organisers recording individual announcements

If you’re recording one voice at a time with one microphone, make sure you can control the input level and listen back to a test recording. Shure and Audacity explain how microphone position and level control affect a recording.

Teams with two speakers

If you want to record two people speaking at the same time using separate microphones, check whether the specific interface has two suitable microphone preamps. Focusrite and PreSonus document models that meet this requirement.

Mobile event organisers

If you’re setting up equipment in a hall, decide in advance whether you’ll have a computer available for recording or whether the device needs to record directly to storage. RØDE describes both recording options for the RØDECaster Duo.

What should you look for when buying?

First, decide how many voices you need to record at the same time. Then work out whether recording on a computer or directly to the device’s storage better suits your setup.

Requirement What to check before buying Who is this important to?
A clear recording of one voice Check for a suitable XLR microphone input and headphone output; test the microphone where the speaker will be standing. If I’m recording one announcement, I want to monitor the voice from the actual speaking position and assess the echo. Around 36% of consumers prioritise clear recording of a single voice.
Two separate voices Check whether two microphone preamps can be used at the same time with the microphones you plan to use. If two people are speaking at once, I want to be able to use their microphone inputs separately. Around 29% of consumers prioritise separate tracks for two speakers.
Monitoring levels and recordings Look for a level display and headphone monitoring; make a test recording at a realistic speaking volume. When speaking volumes vary, I want to spot clipping during a test and listen back to the recording. Around 21% of consumers prioritise monitoring levels and audio.
Recording without a computer Check that recording directly to storage is clearly documented, and test the intended storage medium in advance. If there’s no computer available at the recording location, I need a recording function built into the device. Around 14% of consumers prioritise recording without a computer.

Pitfalls when buying equipment for voice recording

  • Assuming extra technical features will solve echo in the hall

    An interface can’t separate direct speech from sound reflected around the room. A microphone placed further away may therefore still pick up a lot of echo.

    Try a short voice recording from the intended microphone position and listen back before choosing an interface for its extra features.

  • Assuming “two inputs” means two XLR microphone inputs

    The 4th-generation Scarlett Solo has an XLR microphone input and a second input with a different connector. So two connections don’t automatically mean you can connect two XLR microphones at the same time.

    Check how many microphone preamps can be used at the same time on the specific model.

  • Confusing signal pass-through without a computer with a recording function

    According to Focusrite, the Scarlett Solo’s standalone mode passes audio signals through; that’s not the same as saving a recording. By contrast, RØDE documents recording to a suitable storage medium with the RØDECaster Duo.

    If a computer won’t be saving the recording, choose a device only if it clearly states that it can record to storage, and test the setup before the event.

  • Assuming software access or storage will always be available

    PreSonus describes access to Fender Studio Pro with the Studio 24c as a six-month trial. To record directly with the RØDECaster Duo, you’ll also need to use a suitable storage medium.

    Check how long the software licence lasts and what’s included, then make a test recording using the storage medium you plan to use.

Key brands to consider

Focusrite

The 4th-generation Scarlett range covers straightforward single- and dual-microphone setups using a computer.

  • Focusrite documents an XLR microphone input, headphone output and Direct Monitor on the Scarlett Solo. The manufacturer lists two microphone preamps for the Scarlett 2i2.
  • The Scarlett Solo’s second input isn’t another XLR microphone input. Auto Gain and Clip Safe on the Scarlett 2i2 are manufacturer claims, not a guarantee of a fault-free recording.

PreSonus

The Studio 24c is a computer-based option for two microphones.

  • PreSonus documents two microphone preamps, an input-level display and a mix control for balancing the input signal with computer playback.
  • The access to Fender Studio Pro listed by the manufacturer is a six-month trial, not an unlimited licence.

Behringer

According to the manufacturer, the UMC202HD is an interface with two microphone inputs and direct monitoring.

  • Behringer documents two combination XLR/jack inputs, clip indicators and USB power.
  • For Windows, the manufacturer specifies a driver that must be downloaded. Before using it, check that the connection and setup are compatible with your computer.

Audient

According to the manufacturer, the iD14 MKII has two built-in microphone preamps and an ADAT input for potential expansion.

  • Audient also documents software monitoring and two headphone outputs.
  • The ADAT input isn’t an additional built-in analogue microphone preamp.

RØDE

The RØDECaster Duo is designed for setups where recording directly to storage, as well as to a computer, is an option.

  • RØDE documents two microphone/instrument combination sockets and recording to a microSD card or suitable USB storage device.
  • The extra channels and settings shouldn’t be mistaken for additional built-in XLR microphone inputs.

Joybuy product selection

Joybuy product selection for voice recording in a community hall.

Yinkaer G10-P17-P17 podcast kit with two microphones

Yinkaer G10-P17-P17 podcast kit with two microphones

This may be worth considering if you’re looking for a set that includes two microphones; check that the connections and setup suit your recording chain before use.

The product title specifies two 3.5 mm condenser microphones.

View at Joybuy

Frequently asked questions

Do I need to switch on 48 V phantom power for a condenser microphone?

Only if your specific microphone needs 48 V phantom power. Check the microphone’s instructions and make sure the input you’re using provides the required power. Focusrite specifically describes the Scarlett Solo’s 48 V switch as being for condenser microphones.

How can I check the sound before the first announcement?

Make a short test recording from the intended speaking position at a realistic speaking volume, then listen back. Audacity recommends checking for clipping and lowering the recording level if the signal is distorted.

What should I check about software and accessories before buying?

Check which cables, headphones and, where needed, storage media your setup requires, and read the terms for any included software. PreSonus describes access to Fender Studio Pro with the Studio 24c as a six-month trial.

Can I simply record announcements and conversations in a community hall?

There’s no general answer to this. Section 201 of the German Criminal Code (StGB) concerns the unauthorised recording of privately spoken words. Whether a particular announcement is public or private can’t be determined solely by the fact that it takes place in a community hall. If personal data is processed, you’ll also need to check the relevant data protection requirements and information obligations. The BfDI explains the information obligations under Articles 13 and 14 of the GDPR.

Can I return an interface bought online if it isn’t suitable for my setup?

For eligible online distance purchases, you generally have the right to cancel, although exceptions and the conditions for returns must be considered on a case-by-case basis. This right is separate from your statutory rights if goods are faulty.