Who might benefit from a headphone amplifier?

Comparing recordings on your own

If you compare your own recordings or reference tracks at your desk, using the same playback path and matched levels can help. Sonarworks recommends matching the volume of reference tracks to your own mix.

Using demanding headphones

If your current output doesn’t provide a useful volume level for your headphones, compare the power ratings at the appropriate load and take their sensitivity into account. Focusrite notes that the source material and listening environment also play a part.

Comparing recordings together

If several people need to listen to the same recording at once, separately adjustable headphone outputs are useful. Mackie and Behringer describe their splitters as offering several individually adjustable outputs for a shared stereo source.

What should you look for when buying?

Use your existing headphone output

A good fit if: your current output is loud enough for your headphones and works without distracting noise.

Bear in mind: Adding another device won’t match recordings with different volume levels or automatically solve the problem of switching sources.

USB DAC with headphone amplifier

A good fit if: you want to listen to digital recordings from your computer using a dedicated playback path.

Bear in mind: Two headphone sockets don’t automatically let you select two different recordings independently.

Audio interface

A good fit if: you want to record microphones or instruments as well as monitor audio; the fourth-generation Scarlett 2i2 offers the relevant inputs.

Bear in mind: Focusrite lists a maximum headphone output of 32 mW at 33 Ω and 22 mW at 300 Ω. Whether that’s enough volume for your headphones also depends on their sensitivity.

Analogue amplifier or splitter

A good fit if: you already have an analogue stereo signal; a splitter can provide several listening points, each with its own volume control.

Bear in mind: Behringer and Mackie describe their four-way splitters as working with one shared stereo source, not as selecting different recordings independently.

Buying priority What to check Who it matters most to
Comparable volume Check how you’ll switch between files and match their perceived volume. Keep your playback settings consistent. When I compare two recordings, I want to use the same headphones and playback path, and match the volume. Around 36% of consumers prioritise level matching.
Driving your headphones Compare the output power and stated load with your headphones’ specifications. Take their sensitivity into account too. If my existing headphones don’t reach the volume I want from my current output, I want to check the relevant power ratings. Around 29% of consumers put suitable headphone drive first.
Connecting your source Make a note of the outputs on your playback devices and the plug on your headphones. Distinguish between a USB input, an analogue stereo input and a headphone output. When I play recordings from my computer or an existing audio source, I need connections that suit my playback path. Around 21% of consumers prioritise compatibility with their existing source.
Listening together Check how many outputs have separate volume controls. If you need different recordings, also check the source-selection and routing options. When several people listen to the same recording, I want to adjust the volume separately at each listening point. Around 14% of consumers prioritise several individually adjustable listening points.

Common buying mistakes

  • Assuming the louder track is the better recording

    Different volume levels can distort your judgement of tonal balance and processing. Sonarworks recommends matching the levels of reference tracks and your own mixes.

    Match the levels before an A/B comparison and use the same playback path when switching between tracks.

  • Confusing four headphone sockets with four selectable sources

    According to Behringer and Mackie, the HA400 and HM-4 each split one stereo source across several headphone outputs with individual level controls.

    Before buying, decide whether several people need to hear the same signal or different recordings.

    For different recordings, you may also need a suitable source selector or signal routing before the splitter.

  • Comparing power ratings without considering load and headphone sensitivity

    Output power is specified for particular loads and outputs. Focusrite also notes that headphone sensitivity and the source material affect the volume you can achieve.

    Only compare ratings for the appropriate load and connection type, and take your headphones’ sensitivity into account.

Brands to consider

FiiO

Desktop DACs with headphone amplifiers, such as the K11 for digital playback at your desk.

  • FiiO says the K11 has USB, optical and coaxial inputs, three gain settings, and 6.35 mm and 4.4 mm headphone outputs.
  • Power ratings apply to specific loads and outputs. Multiple sockets don’t automatically let you select different recordings independently.

Focusrite

Audio interfaces for anyone who wants to combine recording and headphone monitoring; the fourth-generation Scarlett 2i2 is one example.

  • The model has microphone and line inputs, plus a separately adjustable headphone output.
  • The power ratings apply to this generation and the respective loads. Your particular headphones’ sensitivity also matters when deciding whether they’re a good match.

RME

According to RME, the ADI-2 DAC FS combines DAC functions with headphone and separate IEM outputs.

  • RME lists USB and S/PDIF playback, as well as EQ and other DSP functions.
  • For a recording comparison with as little processing as possible, keep sound processing and settings consistent or switch them off. Manufacturer specifications are no substitute for an independent listening test.

Behringer

Analogue distribution to several listening points from an existing stereo source, for example with the HA400.

  • Behringer says the HA400 has four separately adjustable headphone outputs.
  • The manufacturer specifies an output impedance of around 80 Ω. Check how this pairs with your particular headphones; a USB DAC isn’t built in.

Mackie

Analogue headphone distribution for several listening points, for example with the HM-4.

  • Mackie lists four outputs with individual level controls for a stereo source.
  • Separate volume controls don’t let each listener choose a different recording, and they’re no substitute for a suitable digital source.

Creative

Desktop DACs with additional connection and mixing features, such as the Sound Blaster G8.

  • Creative describes two USB-C audio inputs with mixing and sound processing.
  • For an unaltered recording comparison, keep sound processing and the mix balance under control. Manufacturer claims about sound quality aren’t independent measurements.

Joybuy products for the right playback path

The models below cover an analogue AUX or phono path, and a digital DAC path for one listening point.

Douk Audio T4 PRO Mini Valve (GE5654) headphone amplifier

Douk Audio T4 PRO Mini Valve (GE5654), headphone amplifier

Suitable if you want to use an analogue source via AUX or phono at one listening point.

Listed connections include an MM phono input, a 3.5 mm AUX input and a 3.5 mm headphone output. The stated output power is 150 mW at 32 Ω.

The description highlights a valve sound. Keep the device settings consistent for comparable listening conditions.

View at Joybuy
Nobsound Q4 USB Audio Gaming DAC with headphone amplifier

Nobsound Q4 USB Audio Gaming DAC with headphone amplifier

Suitable if you need a digital playback path from your computer and compatible inputs for other playback devices.

The description lists USB, optical and coaxial inputs, as well as a headphone amplifier for headphones rated at 16–300 Ω.

The bass and treble controls can change the sound. Keep their settings consistent for fair comparisons.

View at Joybuy

Frequently asked questions

How can I compare two recordings as fairly as possible?

Where possible, use the same headphones and playback path, and match the perceived volume before switching between recordings. An amplifier won’t do this automatically.

Can I use a four-way headphone amplifier to listen to four different recordings?

Not simply because it has four outputs: according to Behringer and Mackie, the HA400 and HM-4 each distribute one stereo source to headphone outputs with separate level controls. To listen to different recordings, you’ll need a suitable source selector or signal routing before the splitter.

What should I bear in mind when connecting and switching on?

Check whether the source and amplifier input are analogue or digital, and whether the headphone plugs fit. Start at a low volume; the German Environment Agency recommends listening at a moderate volume when using headphones.

What rights do you have when buying online from a trader?

For a typical online distance purchase from a trader in the EU, you generally have a 14-day right to cancel, starting from the day you receive the goods. The European Union’s Your Europe website also explains the requirement to provide information about return costs. Faulty goods are also covered by a legal guarantee; the EU minimum period is two years. Exceptions and the specific terms of the contract should be taken into account.

Which product marking is relevant for sales in Germany?

CE marking is required only where the relevant harmonised EU rules require it for that type of product. The European Commission explains this requirement; whether it applies to a particular device depends on its design and the rules that apply.