If you want to compare your conservatory with adjoining rooms at the same time, a wireless sensor set with a base station and several transmitters is a good choice. Standalone devices work well if you can read the measurements where they’re taken. For tracking changes over time, consider app-connected sensors, provided the connection requirements can be met at the measuring location. Compare temperature and relative humidity together: TFA Dostmann explains that relative humidity can rise as the temperature falls, even if the water vapour content stays the same.
Who wants to compare several measuring points?
Comparing several rooms
You want to see readings for your conservatory and adjoining rooms at the same time, rather than checking each display one by one. TFA Dostmann describes wireless sensor sets with a base station and several transmitters for this purpose.
Tracking humidity over time
You want to see when readings rise after sunshine, ventilation or a change in how a room is used. Govee and SONOFF describe features for displaying trends over time on certain models.
Taking simple readings
You can visit the rooms yourself and want to read the temperature and relative humidity directly at each measuring point. Manufacturer information for devices such as the techno line WS 9418 also lists MIN/MAX readings.
What should you look for when buying?
| Buying priority |
What to look for |
Who should pay particular attention |
| Comparing several rooms at the same time |
Count the measuring points; check whether the base station and transmitters display temperature and relative humidity. |
If I want to compare my conservatory and an adjoining room at the same time, I need measuring points in both rooms and a suitable display. Around 36% of consumers put simultaneous comparisons between rooms first. |
| Tracking trends rather than a single reading |
Check whether the model stores or exports readings, and what type of connection it needs. |
If I want to track humidity peaks over time, a recorded trend is more useful than a single reading. Around 29% of consumers prioritise tracking changes. |
| Simple readings on site |
Check the display, placement options and battery type; also check what’s included. |
If I can visit the rooms myself, I want to read the measurements directly without needing an additional hub. Around 21% of consumers prioritise straightforward readings on site. |
| Making sense of differences between rooms |
Measure the temperature at each point too; consider the location and the stated operating conditions. |
If my conservatory and adjoining room are at different temperatures, I want to assess temperature and humidity together rather than compare the percentages on their own. Around 14% of consumers prioritise this context. |
Avoid common mistakes
-
Assuming a higher percentage reading automatically means more water vapour
Relative humidity depends on temperature. If rooms are at different temperatures, comparing the percentages alone can be misleading for this reason.
Note the temperature and relative humidity together, and compare readings taken at similar times wherever possible.
-
Choosing a wireless or app-connected device without checking the connection requirements
Depending on the model, app features may require Bluetooth, a Zigbee gateway or a hub. App access also depends on the connection working at the intended measuring location.
Before buying, check how many devices you need, what accessories are required and whether batteries are included with the specific set.
With several measuring points, extra batteries or a required gateway or hub may add to the practical considerations.
-
Using an indoor device long-term somewhere wet or prone to condensation
SONOFF specifies indoor use and non-condensing humidity as the operating conditions for the SNZB-02D. This does not mean it is suitable for splashes or condensation.
Check the actual conditions at the measuring location and follow the operating instructions for the specific device.
-
Assuming different model variants and product details are identical
Similar model names don’t necessarily mean the dimensions and contents are the same.
Before buying the techno line WS 9418, check the model number, dimensions and contents against the manufacturer’s information.
Key brands at a glance
TFA Dostmann
Wireless sensor sets such as KLIMA-MONITOR 30.3054.10 and MULTI-SENS 30.3057.01 are designed for several measuring points at once.
- According to TFA Dostmann, the KLIMA-MONITOR has a base station with its own sensor and three thermo-hygro transmitters; it can be expanded to support up to eight transmitters in total.
- TFA Dostmann states that the MULTI-SENS supports a maximum of three transmitters. Batteries are not included with the KLIMA-MONITOR, according to the manufacturer, so check how many you’ll need for the base station and transmitters.
Govee
The H5075 Bluetooth Thermo-Hygrometer is an option for individual measuring points, with app readings and trend tracking.
- Govee lists charts and data export for the H5075.
- According to Govee, this model supports Bluetooth but not Wi-Fi. Check that the connection will be reliable at your planned measuring location.
SONOFF
The SNZB-02D combines an on-device display with Zigbee features. It’s particularly worth considering if you already use a compatible Zigbee system.
- SONOFF gives a humidity tolerance of ±2 % rF for the SNZB-02D. This is the manufacturer’s stated figure, not an independently measured comparison.
- According to SONOFF, using the app features requires a Zigbee gateway. The instructions specify indoor use and non-condensing humidity for the sensor.
SwitchBot
Meter Plus combines an on-device display with app data, making it suitable for individual measuring points.
- SwitchBot lists a 3-inch display and exportable data for Meter Plus.
- SwitchBot states that a hub is required for push notifications.
techno line
The WS 9418 is a digital thermo-hygrometer for taking readings at a single location.
- The manufacturer lists temperature, relative humidity, MIN/MAX readings and several placement options.
- Before buying, check the model number, dimensions and contents of the specific version.
Joybuy products for multiple measuring points
This selection includes digital devices for taking readings at individual measuring points, as well as a set with several devices for comparing readings directly on site.
No image available
Technoline WS 9425 Thermo-Hygrometer, 3-piece set
This set is designed for three measuring points, so you can take readings at each location.
Three devices; digital temperature and humidity display; MIN/MAX memory; magnet, wall bracket and table stand.
View at Joybuy
No image available
Digital indoor thermo-hygrometer
As a standalone device, it’s suitable for an accessible measuring point. You’ll need additional devices to compare rooms at the same time.
Designed for indoor use; digital temperature and humidity display.
View at Joybuy
No image available
CURRYSMARTER Smart Zigbee LCD temperature and humidity sensor
This single sensor suits one measuring point if you want to track readings in an app; you’ll need additional sensors for several rooms.
Zigbee; LCD display; remote monitoring and notifications via the app. According to the product information, app connectivity requires a Tuya Zigbee gateway or compatible dongle.
View at Joybuy
No image available
techno line WS 9418 thermo-hygrometer
Suitable for accessible measuring locations where you want to read the temperature, humidity and extremes directly on the device. You’ll need additional devices to monitor several points at the same time.
MIN/MAX memory; table or wall mounting. Before buying, check the model number, dimensions and contents of the specific version.
View at Joybuy
No image available
techno line WS9417 thermo-hygrometer
This device is designed for one indoor measuring point; you’ll need additional measuring devices to compare several rooms at the same time.
Temperature and humidity display; trend and MIN/MAX readings; magnetic attachment, table stand or wall mounting. Dimensions according to the product name: 45 × 58 × 14 mm.
View at Joybuy
Frequently asked questions
Can I compare percentage readings directly between a warm conservatory and a cool adjoining room?
Not without taking temperature into account. TFA Dostmann explains that relative humidity can rise as air temperature falls, even if the water vapour content stays the same. So compare temperature and relative humidity together.
Where should I place the hygrometers?
Choose a ventilated measuring location in each room, away from direct sunlight and heaters. This advice comes from TFA instructions for analogue hygrometers; you should also follow the operating conditions and instructions for your specific digital device.
Is 40 to 60% relative humidity a fixed target for every conservatory?
No. The Verbraucherzentrale recommends 40 to 60% for a comfortable indoor climate, but this range is not a specific recommendation for plants or every conservatory. Also take the temperatures and conditions at each measuring location into account.
Do I need an additional gateway or hub for app notifications?
It depends on the model. The SONOFF instructions specify a Zigbee gateway for the SNZB-02D’s app features; SwitchBot specifies a hub for Meter Plus push notifications. Check the requirements for the specific version.