If you listen to concert recordings on your computer and don’t want to use an extra socket, a DAC headphone amplifier powered over USB could be a good option. The key things to check are whether your chosen USB port can supply enough power, and whether the connections and amplification suit your headphones. For a fair comparison between recordings, you should also match their loudness rather than assuming that higher power or sample rates automatically mean better sound.
Who is this selection for?
Listeners without a spare socket
If you’re checking local concert files on your computer, you’ll want to run your DAC without needing an extra mains connection. Whether USB alone is enough can also depend on the power supplied by the source device when using a desktop model. Topping and iFi audio describe USB as providing both audio and power for their respective models.
Listeners with demanding wired headphones
The right connection and suitable amplification for your particular headphones are what matter here. FiiO lists different power outputs for the KA13 depending on the output, load and operating mode.
Listeners comparing recordings at a desk
If you switch between recordings at different volumes, you may want to consider an easily accessible volume control or additional audio connections. Even so, you’ll need to match the loudness of the recordings separately to compare them fairly.
What should you look for when buying?
| What you need |
What to check before buying |
Who should pay particular attention? |
| Power without an extra socket |
Check whether the DAC gets both audio and power over USB, and whether the USB port you plan to use supplies enough power. You may also need an additional power supply. |
If sockets are in short supply, I want to power the DAC from my computer if possible, and take the USB port I’ll be using into account. For around 36% of consumers, power supply is the top priority. |
| Compatibility with your headphones |
Check the connector type, as well as your headphones’ impedance and sensitivity. Only compare power ratings for the right output and under similar load conditions. |
I want to use a suitable output with my existing wired headphones, without relying on power ratings for a different connection. Around 29% of consumers prioritise headphone compatibility. |
| Fair volume comparison |
Look for an easily accessible volume control and software that lets you match comparison copies to the same loudness target. |
When switching between concert recordings at different volumes, I don’t want to mistake differences in loudness for differences in sound. Around 21% of consumers put fair volume comparison first. |
| Additional sources and outputs |
Check whether you need two USB sources at the same time, whether an analogue output needs to be adjustable, and what power supply these features require. |
If I need to connect sources or audio outputs beyond my computer, I’ll check whether those connections are genuinely useful in everyday use. For around 14% of consumers, additional signal paths take priority. |
Common misconceptions
-
A high power rating means little without knowing the output and load
FiiO lists different power ratings for the KA13 depending on whether you use the 3.5 mm or 4.4 mm output, as well as on the load and desktop mode. A single figure therefore doesn’t tell you how loud the DAC will be with a particular pair of headphones.
Only compare power ratings for the output you’ll actually use and under similar load and operating conditions.
Depending on your headphones, you may need a different cable to match the connection.
-
USB doesn’t automatically mean you can go without a power supply
Topping notes that the DX1 II may need an additional power supply if the USB connection doesn’t provide enough power.
Check the power supply from the computer or mobile device you plan to use with the DAC.
Depending on the source, you may need an additional Y-cable and an external power source, which will in turn take up a socket.
-
A DAC can’t restore information missing from a recording
A DAC can’t fix sections of a recording that are already distorted by clipping. According to Audacity, the Clip Fix feature is likely to work only on mild clipping.
Check any problem sections in the file itself, too, and match the levels of recordings with different loudness before comparing them.
Brands to consider
FiiO
The KA13 is a compact USB DAC for wired headphones. The K11 R2R is a desktop model with additional digital inputs and a separate power supply.
- FiiO lists 3.5 mm and 4.4 mm outputs for the KA13.
- According to FiiO, the KA13’s power ratings depend on the connection, load and operating mode. The 12 V/2 A power supply specified for the K11 R2R does not apply to the KA13.
Topping
According to Topping’s quick-start guide, the DX1 II is a USB-powered desktop model with headphone and additional outputs.
- The guide specifies USB for data and power, as well as 3.5 mm and 4.4 mm headphone sockets.
- Topping says that if USB power is insufficient, you may need an additional Y-cable with an external power supply. The Y-cable is not included.
iFi audio
The ZEN DAC 3 is a desktop DAC with a volume control and analogue outputs, making it an option if you want to connect audio equipment as well as headphones.
- The iFi manual lists USB-C for audio and power, an additional 5 V input, and 6.35 mm and 4.4 mm headphone outputs.
- According to the manual, the rear output can be switched between Fixed and Variable. The features do not independently prove that the DAC offers a sound advantage.
Creative
The Sound Blaster G8 is a specialised option if you want to connect and mix two USB audio sources at the same time.
- Creative documents dual-USB mixing and power via USB-1/DC.
- If you’re comparing two files from a single computer, you may not need the additional mixing and gaming features.
Matching products at Joybuy
Matching products coming soon.
Frequently asked questions
Can a USB DAC play concert files without a computer running?
A USB audio input alone doesn’t let you play files independently. With the USB DAC setups described here, the source device selects and plays the files. If you want to listen without a computer, look for a model with documented storage and playback functions.
How do I compare two concert recordings at different volumes?
Match their perceived loudness for comparison, for example by making separate copies with the same LUFS target. The Audacity manual gives a playlist that sounds equally loud as one use for loudness normalisation. Keep the unedited originals.
What should I bear in mind when connecting the DAC and listening for longer periods?
After connecting the DAC or changing the gain setting, start with the volume low. The iFi manual warns against high volume levels when switching settings, and the World Health Organization recommends limiting both volume and listening time. These guidelines are not universal legal volume limits for purchasing a product.
Who is responsible if a product develops a fault after purchase in Germany?
When you buy goods as a consumer, you generally have statutory rights against the seller for at least two years. Your Europe, the European Union’s information portal, explains that this minimum period starts when you receive the goods. A voluntary manufacturer’s warranty does not replace your statutory rights. Any additional right to repair applies only to certain product groups and should not be assumed to cover this DAC without checking.