Who is this selection for?

PC listeners with a local music collection

You manage music files on a computer with two monitors and want to listen through wired headphones. What matters is the formats your player supports and which audio device you select, not how many displays you have. Microsoft Support recommends selecting the device you want when several audio outputs are available. foobar2000 lists MP3, FLAC and WAV among its supported formats.

Listeners with specific headphone requirements

If you already own headphones, check that their plug, required volume level and sensitivity suit the specific amplifier output. Power ratings are only meaningful when considered alongside the output they refer to and the stated load.

Switching between headphones and speakers

If you also want to use active speakers at the same desk, check the line output, the connection you need and how its volume is controlled. A second monitor isn’t a factor in choosing one.

What should you look for when buying?

Your decision comes down to the signal path from your computer, compatibility with your headphones and whether you might switch to active speakers. Two monitors alone don’t call for a second DAC or an additional headphone output.

Priority What to check Who is it important for?
Local music and audio connection USB connection on the DAC and a compatible port on your computer; check your player’s formats and the selected audio output device. If I listen to my music collection on my PC, I want to make sure my player and selected audio output work together. Around 36% of consumers prioritise audio connections and local playback.
Headphone compatibility Compare the plug, gain and amplifier specifications for the output you’ll use and the corresponding load. If I have specific headphones, I want to choose a suitable connection and volume level, rather than relying on a general power rating alone. Around 29% of consumers prioritise compatibility with their existing headphones.
Switching to active speakers Check for a suitable line output and whether its volume is fixed or variable. If I switch between headphones and active speakers at my desk, I need a suitable connection and a clear way to control the volume. Around 21% of consumers prioritise switching between these listening setups.
Space and power supply Check the dimensions, connections and power requirements, as well as what’s included with the specific version. If I have limited desk space or move my equipment often, I want to avoid unnecessary cables and an extra power supply. Around 14% of consumers prioritise space, portability or power requirements.

Common pitfalls

  • Assuming two monitors mean you need two audio outputs

    If Windows detects several audio devices, selecting the wrong output could explain why you can’t hear anything through your headphones.

    First, check which output device is selected in your audio settings. Don’t buy extra audio equipment just because you have a second display.

    An unnecessary extra device and its cables take up valuable desk space.

  • Comparing power ratings without checking the output and load

    FiiO lists different power ratings for the K11 depending on the connection and load. A figure without this context doesn’t tell you how well it will suit your headphones.

    Compare only figures for the output you’ll actually use and a suitable load. Start listening at a low volume.

  • Treating a fixed line output like a volume-controlled speaker output

    According to the user manual, the “Fixed” mode on the iFi ZEN DAC 3 bypasses the volume control on the rear output.

    Before connecting active speakers, decide where you’ll control their volume.

    Depending on your existing setup, you may need an additional volume control or different cables.

  • Assuming versions with similar model names have the same connections

    FiiO distinguishes between the E10K-Type C and the older E10K. Chord Electronics documents a version of the Mojo 2 with a 4.4-mm output.

    Check the connections on the specific version against your cables, rather than relying on an abbreviated model name.

    If the plugs don’t match, you may need an adapter.

Brands worth considering

FiiO

The range spans compact USB devices and desktop DACs with additional inputs and outputs.

  • FiiO lists USB, optical and coaxial inputs, as well as headphone and line outputs, for the K11.
  • Features and power ratings vary by model and output. K11 specifications don’t automatically apply to the E10K-Type C or K7 BT.

iFi audio

The ZEN DAC 3 is a USB-C desktop device for headphones and an additional analogue listening setup.

  • The user manual describes 6.35-mm and 4.4-mm headphone outputs, as well as fixed or variable rear outputs.
  • “Fixed” bypasses the volume control on the rear output; these features don’t prove a general sound-quality advantage.

Cambridge Audio

The DacMagic 200M is designed for a dedicated listening spot, with USB and other input sources.

  • The EU user manual lists USB, other digital inputs, Bluetooth, a headphone socket and a 12 V power supply included in the box.
  • If you only use one USB source, you may not need all the additional input options.

RME

The ADI-2 DAC FS is aimed at listeners who want to use additional built-in settings.

  • RME lists USB, optical and coaxial digital inputs, as well as DSP features such as EQ and crossfeed.
  • Documented features aren’t independent proof of a particular sound quality.

Chord Electronics

The Mojo 2 and Hugo 2 are portable DAC headphone amplifiers for listening beyond the confines of a desk.

  • Chord Electronics describes the Hugo 2 as having a battery and several digital inputs.
  • The Mojo 2 has different connection versions. Before buying, check which version is on offer and what connections it has.

Joybuy products

This selection includes an analogue PC AUX headphone amplifier and a USB DAC for your desk. Check which signal path suits the connections on your computer.

Douk Audio T4 PRO Mini Valve Tube Amplifier

Douk Audio T4 PRO Mini Valve Tube Amplifier

This model is only suitable for listening through wired headphones on a PC if your computer provides an analogue 3.5-mm audio signal; the AUX input described is not a USB input.

The product specifications list a 3.5-mm headphone output, a stereo RCA output and 150 mW at 32 Ω. The stated headphone range is 32–300 Ω.

View at Joybuy
Nobsound Q4 USB Audio DAC

Nobsound Q4 USB Audio DAC

For listening to local music on a PC, the USB input described is relevant. The device is also listed as having a headphone amplifier and an RCA output for another listening setup.

The product specifications list optical and coaxial inputs, support for 16–300 Ω headphones, and bass and treble controls. The product title specifies 24 Bit and 192 kHz.

View at Joybuy

Frequently asked questions

Do I need two DACs because I have two monitors?

No. The number of monitors doesn’t determine how many audio devices you need. If Windows shows several audio outputs, select the one you want explicitly. Microsoft Support recommends checking that the right output device is selected.

Can a DAC make up for my music files not being supported?

No, not simply by connecting a DAC: your player must be able to play the files first. foobar2000, for example, lists FLAC, WAV and MP3 among its supported formats. The audio signal is then sent to the selected output.

How do I set up a new headphone amplifier?

Connect the specified inputs and outputs, select the right audio device on your computer and start at a low volume. iFi audio specifically warns against switching the gain at high volume on the ZEN DAC 3; this advice applies to this model.

What are my rights in Germany if a product is faulty or I buy online?

Your statutory rights for faulty goods are separate from a voluntary guarantee. Online purchases generally come with a right to cancel, usually within 14 days; the legal requirements and exceptions apply to each specific contract. Verbraucherzentrale explains both topics.

What should I know about product safety and disposal?

For market surveillance, the Bundesnetzagentur lists CE marking, product identification and manufacturer information among the checks it carries out; a mark alone isn’t an independent product test. According to information from the Federal Environment Ministry, unwanted electrical equipment should be taken to an authorised collection or take-back point, not put in household rubbish.