Who can benefit from a DAC at a standing desk?

Comparing recordings at a standing desk

If you often switch between finished recordings, easy-to-reach volume controls and consistent playback settings can make a real difference. Product information from FiiO, iFi audio and RME shows the different ways you can manage outputs and sound features.

Listeners with multiple pairs of headphones

If your headphones have different plugs or you use sensitive in-ear headphones, check the sockets and volume range on the specific device. FiiO lists 6.35-mm and 4.4-mm outputs for the K11, while RME describes a separate IEM output on the ADI-2 DAC FS.

Recording with monitoring needs

If you’ll be connecting microphone, instrument or line-level signals as well as listening, make sure you plan for the necessary inputs and routing. Focusrite describes these features for the fourth-generation Scarlett 4i4.

What should you look for when buying?

What matters What to check before buying Who should pay particular attention?
Comparability Volume control, gain and sound features; keep settings consistent when comparing. When I switch between recordings, I don’t want to mistake changes in volume or sound settings for differences in the recordings. Around 36% of consumers put consistency when comparing first.
Headphone compatibility Check that your existing plug matches the output, and review the specifications for the headphones you’ll be using. If I use several pairs of headphones or sensitive in-ear headphones, the connection and volume range need to suit each model. Around 29% of consumers prioritise headphone compatibility.
Ease of use at your desk Check how easy it is to reach the controls, which digital inputs you need, the power supply and cable routing. When I switch between files while standing, I want to adjust the volume right at my desk and route the cables neatly. Around 21% of consumers prioritise ease of use at their workstation.
Recording and routing If you’re making your own recordings, check for suitable microphone, instrument or line inputs and the monitoring mixes you need. If I want to record external signals or use separate mixes as well as listen to finished files, a playback-only DAC may not be enough. Around 14% of consumers focus on recording and routing.

Which buying mistakes should you avoid?

  • Comparing power ratings across different sockets directly

    The FiiO K11’s specifications apply to particular outputs, loads and measurement conditions. So, figures are only comparable when those conditions match.

    First check the plug on your headphones, then compare power ratings only for the same type of output and load.

  • Assuming a fixed line output is adjustable

    According to the manufacturer’s manual, selecting “Fixed” on the iFi ZEN DAC 3 bypasses the volume control for the rear output. This may mean you need to adjust the volume separately on any active speakers connected to it.

    Before connecting anything, check whether “Fixed” or “Variable” is selected and whether the connected device has its own volume control. Start at a low volume.

  • Leaving sound processing switched on when comparing recordings

    PowerMatch and XBass+ can be switched on or off on the iFi ZEN DAC 3; RME lists EQ and Crossfeed for the ADI-2 DAC FS. These settings can change the sound you hear.

    Set up a comparison configuration and keep the settings consistent. Only switch on processing deliberately as a separate condition for comparison.

  • Buying a playback DAC as a substitute for recording inputs

    A device for playback won’t automatically have the inputs you need for microphones or instruments. If you’d like to make your own recordings in future, you may also need an audio interface.

    Before buying, decide whether you only want to listen to finished files or also record external signals.

Which brands are worth considering?

FiiO

The K11 is a desktop DAC with a headphone amplifier, designed for use with multiple digital sources.

  • FiiO lists 6.35-mm and 4.4-mm headphone outputs, an RCA line out and an external 12-V/2-A power supply.
  • Power ratings apply to the specified load and measurement conditions. The K11 and K11 R2R are different models.

iFi audio

The ZEN DAC 3 is designed for USB playback through headphones and can also connect to other audio equipment.

  • The manufacturer’s manual lists 6.35-mm and 4.4-mm headphone outputs, along with switchable fixed or variable rear outputs.
  • According to the manual, selecting “Fixed” bypasses the volume control for the rear output. Set PowerMatch and XBass+ deliberately when comparing recordings.

RME

According to the manufacturer, the ADI-2 DAC FS has separate headphone and IEM outputs, as well as adjustable signal processing.

  • RME lists a 5-band parametric EQ and Crossfeed for tailored listening tests.
  • For comparisons without processing, you’ll need to check the settings. The manufacturer’s specifications don’t prove a general audible advantage over other devices.

Focusrite

The fourth-generation Scarlett 4i4 is an audio interface for recording additional sources and creating different monitoring mixes.

  • Focusrite describes inputs for microphone, instrument and line-level signals, as well as separate routing.
  • According to the user guide, the described setup requires a USB connection to a computer and the supplied power supply. If you only listen to finished files, you may not need the inputs.

Products to suit you at Joybuy

Related products will be available soon.

Frequently asked questions

How do I set up a comparison between different recordings?

Use the same headphones and signal path, carefully match the listening volume, and keep gain, EQ, Crossfeed and sound switches consistent for each comparison. PowerMatch and XBass+ can be switched on or off on the ZEN DAC 3; RME lists EQ and Crossfeed for the ADI-2 DAC FS. This doesn’t mean the two devices sound identical.

Do I need a DAC or an audio interface to make my own recordings?

You don’t need recording inputs to listen to finished files. For microphones or instruments, the fourth-generation Scarlett 4i4, for example, has suitable inputs; according to Focusrite, microphones connect via XLR.

How can I protect my hearing during longer comparisons?

Keep the volume low and take breaks. The World Health Organization gives 90 dB as an example of a listening level for up to four hours a week. The position of a volume control doesn’t tell you the actual sound level at your ear.

What should I do if a device breaks, and how should I dispose of it in Germany?

Statutory consumer rights are different from a voluntary guarantee, as explained by the Verbraucherzentrale. According to the German Environment Agency, electrical waste shouldn’t go in household rubbish. Take it to a suitable collection or take-back point instead.

Is the CE mark an independent sound-quality or safety certification?

No. According to the European Commission, for products covered by the rules, the manufacturer uses the CE marking to declare that the product meets the applicable EU requirements. It isn’t a sound-quality rating, nor is it centrally issued as a certificate by an EU body. You’ll need to check which requirements apply to the specific device and power supply.