Who is this selection for?

Comparing recordings on a PC

You listen to several finished recordings through the same headphones and want playback to remain as unaltered and easy to control as possible.

Connecting demanding headphones

You want to check the connection, gain and output specifications against your specific headphones before deciding between a compact or larger unit.

Connecting multiple sources

You want to connect other digital sources or active speakers as well as your computer, and plan for the space and cabling they will need.

What should you look for when buying?

What matters What to check Who should pay particular attention?
Consistent playback An easy-to-reach volume control and gain settings; sound processing should be switchable. If you want to compare recordings directly, bass or treble boosts should not be applied without you noticing. Around 36% of consumers particularly value comparable playback settings.
Connecting your headphones Check the connection and output specifications against your headphones' impedance; if using 4.4 mm, make sure you have the right cable too. If you want to keep using your existing headphones, the plug and power specifications should be suitable. Around 29% of consumers pay particular attention to compatibility with their headphones.
Space and power supply Consider the unit's dimensions, cable management and power supply or required socket. On a small desk, you don't want to take up unnecessary space or sockets. Around 21% of consumers therefore prioritise the space required and power supply.
Other sources and speakers Check which USB, optical or coaxial inputs you need; for line outputs, check whether the volume is fixed or variable. If you want to use other sources or active speakers as well as your computer, make sure the relevant inputs and outputs are available. Around 14% of consumers prioritise this connection flexibility.

Common buying mistakes

  • Comparing output power without checking the load

    Manufacturers quote power ratings at different impedances and under different test conditions. A higher figure on its own doesn't tell you whether a unit is a better match for your headphones.

    Compare power only alongside the stated impedance, output and test conditions. Also check that the plug you need will fit.

  • Leaving sound processing on when comparing recordings

    The Fosi Audio Q4, FiiO E10K Type-C and iFi ZEN DAC 3 offer sound processing or boost features. Different settings can affect how the recordings compare.

    Turn off bass or treble boosts if you want to compare the recordings without these adjustments, and keep the other settings consistent.

  • Overlooking the power supply and adapter

    According to the manufacturer, the FiiO K11 requires a 12-V/2-A power supply. The manufacturer's instructions for the iFi ZEN DAC 3 specify a separate 5-V power supply, which is not included.

    Check the power requirements and what's included before buying, and make sure you have a spare socket at your desk.

    Depending on the model, you may need to allow space for an additional power supply or socket.

Key brands at a glance

FiiO

The E10K Type-C is a compact USB option, while the K11 is a desktop DAC with multiple digital inputs and headphone outputs.

  • According to FiiO, the K11 has three gain settings, 6.35-mm and 4.4-mm headphone outputs, and an RCA line output.
  • According to the manufacturer, the K11 requires 12 V/2 A. Specifications for the E10K Type-C do not automatically apply to older E10K versions.

Fosi Audio

The Q4 is a compact DAC for USB, optical and coaxial digital sources.

  • According to Fosi Audio, the Q4 has an RCA output and bass and treble controls.
  • For consistent comparisons, you need to set the tone controls deliberately. The manufacturer's 160 mW RMS rating is for 32 Ω under the stated test conditions.

iFi audio

The ZEN DAC 3 is designed for USB playback and has headphone outputs as well as outputs for other audio equipment.

  • The manufacturer's instructions specify 6.35-mm and 4.4-mm headphone outputs, as well as fixed or variable outputs.
  • Gain and XBass+ can be switched on or off, so set them deliberately when comparing recordings. A separate 5-V power supply is not included, according to the instructions.

TOPPING

The DX3 Pro+ is a desktop DAC for people using multiple digital sources and switchable headphone and line outputs.

  • The manufacturer's instructions list USB, optical and coaxial inputs, Bluetooth and different output modes.
  • This model has a 3.5-mm headphone socket. According to the instructions, the unit measures 12,0 × 16,5 × 4,0 cm.

Focusrite

The 4th-generation Scarlett Solo is an audio interface for anyone planning to record with a microphone or instrument as well as monitor audio.

  • The manufacturer's documentation lists inputs, Direct Monitoring and a separate headphone control.
  • For playback alone, the recording features go unused. Focusrite specifies 32 mW at 33 Ω and 22 mW at 300 Ω; check these figures against your headphones and take the relevant load into account.

Suitable products at Joybuy

This selection is for anyone looking for a desktop DAC with multiple inputs and outputs for digital sources and headphones at their desk.

Nobsound Q4 USB DAC and headphone amplifier

Nobsound Q4 USB DAC and headphone amplifier

An option if you want to switch between digital sources at your desk and connect headphones and speakers.

The product name lists USB, an optical input, Bluetooth, a remote control, 24-bit/192-kHz specifications and tone controls.

View at Joybuy

Frequently asked questions

Do I need an audio interface to compare finished recordings?

No, not for playback alone: a USB DAC with a headphone output is enough. If you also want to record microphone or instrument signals, an interface such as the Scarlett Solo provides inputs and Direct Monitoring.

How should I set up the amplifier before comparing recordings?

Start with the volume low, especially after changing the gain. Keep the gain and volume consistent and easy to track during comparisons, and turn off optional bass or treble boosts if you don't want to compare those effects.

What should I check about USB, the power supply and the headphone plug?

Check the USB connection, power supply and headphone socket size for the specific model. For example, the FiiO K11 requires 12 V/2 A and has 6.35-mm and 4.4-mm headphone outputs; according to the manufacturer's instructions, a separate 5-V power supply is not included with the iFi ZEN DAC 3.

What are my rights when buying online in Germany?

For online orders in Germany, you generally have a 14-day right to cancel from the date you receive the goods, as explained by the Verbraucherzentrale. The statutory two-year legal guarantee applies to your contract with the seller; an additional manufacturer's guarantee does not replace it, as explained by the European Union's Your Europe website.

Does CE marking mean the product has undergone an independent sound or quality test?

No. According to information from the European Union's Your Europe website, where relevant EU rules require CE marking, it is the manufacturer's declaration that the product meets the applicable requirements—not an independent assessment of its sound.