Who might benefit from an external DAC?

Hi-res listeners with wired headphones

You want to play files through the input you actually use and first check whether you need to replace your existing headphone output.

Listeners with demanding or sensitive headphones

For you, the right connector, suitable gain and finely adjustable output often matter more than a single maximum power rating.

Listeners with multiple audio sources

You want to connect digital sources other than your computer, or active speakers, so you’ll need to distinguish between inputs and fixed and variable analogue outputs.

What should you look for?

Keep using your existing headphone output

A good fit if: The output suits your headphones, offers enough volume control and produces no unwanted noise when you listen.

The trade-off: You won’t need an extra box or power supply, but you won’t gain any additional inputs or outputs either.

USB DAC with headphone amplifier

A good fit if: Your computer or compatible mobile device is your only digital source and you need a suitable headphone output.

The trade-off: Check the USB connection and power supply; other digital sources may need different inputs.

Desktop DAC with multiple digital inputs

A good fit if: You want to connect an optical or coaxial source as well as USB.

The trade-off: More connection options take up space and, depending on the model, may require an external power supply. Headphone sockets also vary.

Compact USB dongle

A good fit if: Compact dimensions and use with compatible devices matter more to you than optical or coaxial inputs.

The trade-off: The AudioQuest DragonFly Cobalt’s stated resolution is limited to up to 24 Bit/96 kHz; also check whether you’ll need connection adapters.

What you need What to check before buying Who is it particularly relevant to?
File and input compatibility Check the file format, sample rate and playback device against the specific USB, optical or coaxial input you’ll be using. If I want to play hi-res files through a particular input, the source and DAC need to be compatible with each other for that specific use. Around 33% of consumers put file compatibility first.
Headphone connection and volume control Check that the connector and output match; compare gain and power specifications only for the same output and under comparable test conditions. With sensitive headphones, I want to adjust the volume precisely and avoid unwanted noise, rather than focus only on a high power rating. Around 27% of consumers prioritise a suitable headphone connection.
Additional sources or speakers List the digital inputs and speaker outputs you need; check the output mode before connecting active speakers. If I want to connect a digital source or active speakers as well as my computer, I’ll need the right inputs and outputs. Around 20% of consumers focus mainly on connection options.
A simple setup Assess your existing output and, for the device you’re considering, check what’s included, whether it needs a power supply and whether you’ll need adapters for your connections. If I want to keep the number of devices and cables to a minimum, an extra DAC should meet a specific need. Around 20% of consumers prioritise a simple overall setup.

Common selection mistakes

  • The highest sample rate doesn’t automatically apply to every input

    For the FiiO K11 and TOPPING DX3 Pro+, the documented limits vary depending on whether you use the USB, optical or coaxial input.

    Check the file format and sample rate against the specification for the input you’ll actually use.

  • Power ratings for different sockets aren’t directly comparable

    FiiO lists different figures for the K11’s 6.35-mm and 4.4-mm outputs, each under its stated load conditions.

    First, check which connector suits your headphones and what they need; compare power ratings only for the same socket and under comparable test conditions.

  • Don’t treat a fixed analogue output as a variable one

    According to the manual, the ‘Fixed’ mode on the iFi ZEN DAC 3 bypasses volume control for the rear outputs.

    Before connecting and switching on active speakers, check the output mode and the speakers’ volume control.

  • Don’t overlook power supplies and adapters when setting up

    The separate 5-V power supply isn’t included with the iFi ZEN DAC 3; AudioQuest specifies an additional Lightning-to-USB adapter for certain iOS devices.

    Before you buy, check what power supply and connections your source requires.

    Depending on your source, you may also need a compatible power supply or connection adapter.

Key brands to consider

FiiO

The documented K11 is a desktop DAC with multiple digital inputs and different headphone outputs.

  • FiiO lists USB, optical and coaxial inputs, plus 6.35-mm and 4.4-mm outputs for the K11.
  • Power and noise specifications apply to the stated socket and load. The K11 and K11 R2R have different DAC architectures and are not the same model.

iFi audio

The ZEN DAC 3 is a documented example of a USB-based desktop DAC with headphone and analogue outputs.

  • The iFi manual lists 6.35-mm and 4.4-mm headphone outputs, along with switchable gain.
  • In ‘Fixed’ mode, volume control is bypassed for the rear outputs. The manual states that the separate 5-V power supply isn’t included.

TOPPING

The DX3 Pro+ is a desktop DAC with multiple digital inputs, including Bluetooth.

  • The TOPPING manual lists USB, optical and coaxial inputs, as well as Bluetooth.
  • The connection list specifies a 3.5-mm headphone socket; it doesn’t list a 4.4-mm socket.

AudioQuest

The DragonFly Cobalt is a compact USB alternative if you don’t need multiple digital inputs for a desktop setup.

  • AudioQuest specifies a resolution of up to 24 Bit/96 kHz for the Cobalt.
  • AudioQuest lists additional connection requirements for certain mobile devices. Check in advance which adapters your specific source needs.

Suitable products at Joybuy

This selection includes a desktop DAC with multiple digital inputs for connecting different sources.

Nobsound Q4 USB DAC with Bluetooth headphone amplifier

Nobsound Q4 USB DAC with Bluetooth headphone amplifier

The listed USB, optical and coaxial inputs, plus Bluetooth, suit a setup with multiple digital sources.

The product title states 24 Bit/192 kHz. The product description lists PC USB, optical and coaxial inputs, Bluetooth and an RCA output. According to the description, Android devices need an OTG cable and iOS devices need a Camera Kit; you’ll need to provide these accessories yourself. The U-Disk input takes priority over Bluetooth, according to the description.

View at Joybuy

Frequently asked questions

Do I need an external DAC for every lossless or high-resolution file?

Not necessarily: it depends on your source, its existing output and the sample rate you want. Apple says that Apple Music songs above 48 kHz on an iPhone or iPad require an external DAC; different requirements apply to certain Macs.

How should I set up an amplifier for sensitive headphones?

Choose a suitable connector and output, then start at a low volume. For in-ear headphones, iFi recommends using a low PowerMatch gain on the ZEN DAC 3 and warns against switching gain at high volume. The World Health Organization notes that both volume and listening duration matter for your hearing.

What should I bear in mind when connecting active speakers?

Check whether you’re using a fixed or variable line output, and where the volume is controlled. According to the manual, ‘Fixed’ on the iFi ZEN DAC 3 bypasses volume control for the rear analogue outputs; the TOPPING DX3 Pro+ manual also describes a fixed line level in DAC mode.

What additional costs and consumer rights should I consider?

Check whether the power supply and any connection adapters you need are included; the separate 5-V power supply isn’t included with the iFi ZEN DAC 3. The Verbraucherzentrale distinguishes the statutory right to a remedy from the seller from a voluntary guarantee. Online purchases in Germany generally come with a right to cancel, usually within 14 days; exceptions and the exact start of the cancellation period should be taken into account.

Can I put an old DAC in my household rubbish?

No. The Federal Environment Agency explains that waste electrical equipment must be collected separately; local collection points generally accept it free of charge. Retailer take-back options depend on the relevant conditions.