Choose a DAC based on the connection and power requirements of your wired headphones, as well as your computer’s digital output. Then check that the power supply, controls and cable routing work well at both desk heights. Extra inputs are most useful if you want to connect other sources. A DAC alone cannot make a non-lossless source lossless.
Who is a DAC for at a standing desk?
Lossless listeners using a computer
You mainly listen on a PC or Mac with wired headphones and want to connect your computer, playback settings and DAC in a way that works for you. Apple Support describes Lossless as a separate audio quality setting in Apple Music.
Owners of power-hungry headphones
If your current output doesn’t provide enough power for your headphones, compare the power specifications for the relevant connection and load. FiiO lists different figures for the K11 depending on the output and load.
Listeners with a changing desk setup
If you switch between sitting and standing, or between headphones and other audio sources, easy-to-reach controls and tidy cable routing matter. FiiO and Cambridge Audio’s product documentation describes different connections and power supplies for their respective devices.
What should you look for?
Start by checking the signal path from your computer and which headphone output you need. Then decide whether extra power, additional sources or a particularly tidy desk setup matters most to you.
| What matters |
What to check before buying |
Who it matters most to |
| Lossless signal path |
Check your computer’s digital output, USB connection, music service settings and wired headphones as a whole. |
If I want to listen to lossless music from my computer, I look at the source, settings and cable connection as one complete signal path. Around 36% of consumers consider this their top priority. |
| Headphone power |
Compare impedance, sensitivity and plug type with the specifications for the output you’ll actually use and its load. |
If my current connection doesn’t make my headphones loud enough, having the right power reserve is essential. I compare the figures for my specific headphones. Around 29% of consumers put headphone power first. |
| Controls and cable routing |
Check the space available, the position of the volume control and the cable routes with the desk fully raised. |
If I regularly raise and lower my desk, I want the controls and connections to be easy to reach, with cables routed without being pulled tight. Around 21% of consumers prioritise ease of use at a standing desk. |
| Additional sources |
Check that the available input connections and the input your speakers need are compatible. Don’t confuse a line output with a headphone output. |
If I want to connect other digital sources or active speakers as well as my computer, I need the right additional inputs or a line output. Around 14% of consumers make this their top priority. |
Common selection mistakes
-
Assuming a Hi-Res specification means lossless playback
The supported sample rate tells you what a device can do, not what’s in the source file, which settings your music service uses or whether the entire signal path is lossless.
Check your source and playback settings before you buy. Apple Music lets you enable Lossless separately in its audio quality settings, as Apple Support explains.
-
Comparing output power without considering load and connection
FiiO’s specifications for the K11 vary depending on the headphone output and stated load. A single power figure therefore won’t tell you how the DAC will work with your headphones.
Compare figures only for the same output and a suitable load in Ω, using comparable measurement conditions. Start listening at a low volume.
-
Overlooking the power supply and moving cables at a standing desk
According to the manufacturer, the FiiO K11 needs a separate 12 V/2 A power supply. At a height-adjustable desk, the power and audio cables need to reach the desk at its highest position.
Measure the cable routes with the desk at its maximum height, and check which power supply and connection cables are included in the specific offer.
Key brands at a glance
FiiO
The documented desktop models K11 and K11 R2R combine a DAC and headphone amplifier with USB and other digital inputs.
- For the K11, FiiO lists 6.35 mm and 4.4 mm headphone outputs, an RCA line output and an external 12 V/2 A power supply.
- According to FiiO, the K11 and K11 R2R use different DAC technologies. Their power specifications therefore can’t be directly compared.
iFi audio
The ZEN DAC 3 is a USB-C desktop DAC with a built-in headphone amplifier, designed for a listening setup that mainly uses a computer.
- iFi audio lists 6.3 mm and 4.4 mm outputs, as well as switchable gain.
- A stated sample rate doesn’t prove the quality of the source or guarantee a noticeable benefit in your particular setup.
Fosi Audio
According to Fosi Audio, the Q4 combines USB, optical and coaxial inputs with headphone and RCA outputs, plus bass and treble controls.
- The Q4 manual describes a 3.5 mm headphone connection. Fosi Audio specifies 160 mW RMS at 32 Ω under the stated measurement conditions.
- The stated power figure doesn’t, by itself, prove that the device is suitable for every pair of headphones.
Cambridge Audio
The DacMagic 200M is an option for a listening setup with headphones and several digital sources.
- The Cambridge Audio manual describes a dedicated headphone amplifier and lets you switch between USB, digital inputs and Bluetooth sources.
- Using Bluetooth with a music service doesn’t automatically give you a lossless signal path. Check how it works with your device and service separately.
Joybuy products for USB listening with tone controls
This selection features a USB DAC with a headphone amplifier and tone controls for listening at your computer.
No image available
Nobsound Q4 USB DAC with headphone amplifier
For USB playback from a computer, the product description says this device is designed as a DAC with a built-in headphone amplifier. Treble and Depth controls let you adjust the sound.
The product title lists Bluetooth, an optical input, and 24-bit and 192 kHz support. The product description also mentions RCA outputs and a remote control.
The product description says that an external DC power supply is needed. Use a compatible power supply.
Joybuy
Frequently asked questions
Is a DAC enough to make music play back losslessly?
No. A DAC alone can’t make playback lossless. For Apple Music, you need to enable Lossless in the audio quality settings. Apple also distinguishes between wired playback and Bluetooth. Check the signal path for the service and device you actually use.
How do I set up a DAC at a standing desk?
Connect your computer’s digital output to a compatible DAC input, select the DAC as your audio output and start at a low volume. Plan your cable routes with the desk at its maximum height. According to the manufacturer, the FiiO K11 also needs a 12 V/2 A power supply.
How do I compare the power output for my headphones?
Compare the power figures for a suitable headphone output and a load that matches your headphones. The manufacturer’s specifications for the FiiO K11 depend on the output and load, so one maximum figure isn’t enough to choose the right model.
What should I bear in mind when listening with headphones for longer periods?
Consider volume and listening time together, and start at a low volume. The World Health Organization gives 80 dB for up to 40 hours a week as an example; this isn’t a setting you can read from the DAC’s volume control.
What extra costs and rights should I consider when buying in Germany?
Check the specific offer to see whether it includes a power supply and the connection cables you need. For faulty goods, § 437 BGB provides buyers with rights subject to the statutory conditions. These are separate from any voluntary manufacturer’s warranty.